• ETRI Journal
• /
• v.34 no.2
• /
• pp.268-271
• /
• 2012

The high peak-to-average power is one of the main drawbacks in OFDM systems. This letter proposes a partial shift mapping (PSM) method for peak power reduction in OFDM systems. By utilizing the properties of the discrete Fourier transform, the proposed method generates a set of candidate signals without additional complex multiplication and selects the one with minimum peak power for transmission. Analyses and simulations confirm that the PSM method achieves satisfactory peak power reduction performance and low complexity compared with other kindred methods, for example, selected mapping and partial transmit sequences.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1257-1263
• /
• 2018

Secure authentication technology is a fundamental building block for secure services for Internet of Things devices. Particularly, the multiplication operation is a core operation of public key cryptography, such as RSA, ECC, and SIDH. However, modern low-power processor, namely ARM Cortex-M3 processor, is not secure enough for practical usages, since it executes the multiplication operation in variable-time depending on the input length. When the execution is performed in variable-time, the attacker can extract the password from the measured timing. In order to resolve this issue, recent work presented constant-time solution for multiplication operation. However, the implementation still missed various speed-optimization techniques. In this paper, we analyze previous multiplication methods over ARM Cortex-M3 and provide optimized implementations to accelerate the speed-performance further. The proposed method successfully accelerates the execution-time by up-to 25.7% than previous works.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.321-324
• /
• 2001

This paper describes a fast and low-power multiplier co-processor architecture for digital signal processing applications and real-time control systems and its use as a multiplier co-processor for a 32-bit RISC microprocessor utilizing its one of the 16 co-processor interfaces. Its architecture adopts various algorithms to reduce the dynamic power and the area as well. The designed multiplier performs 32$\times$32 bit multiplication, and was designed using verilog HDL and 0.35${\mu}{\textrm}{m}$, 3V, 4M CMOS standard cell library. Its target operating speed is 40MHz, area lower than 10000 gate counts, and 10mW/MHz of power.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.173-180
• /
• 2022

Approximate Computing is a promising method for designing hardware-efficient computing systems. Approximate multiplication is one of key operations used in approximate computing methods for high performance and low power computing. An approximate 4-2 compressor can implement hardware-efficient circuits for approximate multiplication. In this paper, we propose an approximate multiplier with low area and low power characteristics. The proposed approximate multiplier architecture is segmented into three portions; an exact region, an approximate region, and a constant correction region. Partial product reduction in the approximation region are simplified using a new 4:2 approximate compressor, and the error due to approximation is compensated using a simple error correction scheme. Constant correction region uses a constant calculated with probabilistic analysis for reducing error. Experimental results of 8×8 multiplier show that the proposed design requires less area, and consumes less power than conventional 4-2 compressor-based approximate multiplier.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.270-276
• /
• 2018

This paper presents a low area 256-point pipelined FFT architecture, especially for IEEE 802.16a WiMAX systems. Radix-24 algorithm and single-path delay feedback (SDF) architecture are adopted in the design to reduce the complexity of twiddle factor multiplication. A new cascade canonical signed digit (CSD) complex multipliers are proposed for twiddle factor multiplication, which has lower area and less power consumption than conventional complex multipliers composed of 4 multipliers and 2 adders. Also, the proposed cascade CSD multipliers can remove look-up table for storing coefficient of twiddle factors. In hardware implementation with Cyclone 10LP FPGA, it is shown that the proposed FFT design method achieves about 62% reduction in gate count and 64% memory reduction compared with the previous schemes.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.105-108
• /
• 2001

4 32-bit RISC core is designed for embedded application and DSP. This processor offers low power consumption by fully static operation and compact code size by efficient instruction set. Processor performance is improved by wing conditional instruction execution, block data transfer instruction, multiplication instruction, bunked register file structure. To support compact code size of embedded application, It is capable cf executing both 16-bit instructions and 32-bit instruction through mixed mode instruction conversion Furthermore, for fast MAC operation for DSP applications, the processor has a dedicated hardware multiplier, which can complete a 32-bit by 32-bit integer multiplication within seven clock cycles. These result in high instruction throughput and real-time interrupt response. This chip is implemented with 0.35${\mu}{\textrm}{m}$, 4- metal CMOS technology and consists of about 50K gate equivalents.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.263-264
• /
• 2006

In this paper, an efficient and fast algorithm to reduce calculation amount of FIR(Finite Impulse Responses) filtering is proposed. Proposed algorithm enables arbitrary size of parallel processing, and their structures are also easily derived. Furthermore, it is shown that the number of multiplication/sample is reduced, and number of instructions using MAC(Multiplication and Accumulation) processor are also reduced. For theoretical improvement, numbers of sub filters are compared with those of conventional algorithm. In addition to the theoretical improvement, it is shown that number of element for hardwired implementation are reduced comparison to those of the conventional algorithm.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.2
• /
• pp.124-130
• /
• 2005

In this paper, low-power design and implementation techniques for DWT(Discrete Wavelet Transform) of the JPEG2000 compression are proposed. In DWT block of the JPEG2000, linear phase 9 tap and 7 tap filters are used. For low-power implementation of those filters, processor technique for DA(Distributed Arithmetic) filter and minimization technique for number of addition in CSD(Canonic Signed Digit) filter are utilized. Proposed filter structure consists of 3 blocks. In the first CSD coefficient block, every possible 4 bit CSD coefficients are calculated and stored. In second processor block, multiplication is done by MUX and addition processor in terms of the binary values of filter coefficient. Finally, in third block, multiplied values are output and stored in flip-flop train. For comparison of the implementation area and power dissipation, proposed and conventional structures are implemented by using Verilog-HDL coding. In simulation, it is shown that 53.1% of the implementation area can be reduced comparison with those of the conventional structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.414.2-414.2
• /
• 2016

The optimal configuration of a transmutation reactor based on a low aspect ratio tokamak is determined using coupled analysis of tokamak systems and neutron transport. The inboard radial build of the reactor components is obtained from plasma physics and engineering constraints, while outboard radial builds are mainly determined by constraints on a neutron multiplication, a tritium-breeding ratio, and a power density. It is shown that a breeding blanket model has an impact on the radial build of a transmutation blanket. A burn cycle has to be determined to limit a fast neutron fluence of a plasma facing material below a radiation damage limit.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.405-406
• /
• 2009

4-2 compressor는 곱셈기의 부분 곱 합 트리(partial product summation tree)의 기본적인 구성요소이다. 본 논문은 저 전력 특성을 갖는 4-2 compressor 구조를 제안한다. 제안한 회로는 한 개의 전가산기와 MUX로 구성하였다. 이 회로는 기존의 회로와 비교하였을 때 회로 구성에 필요한 트랜지스터수가 14개 감소하였으며, 6.3%의 전력소모가 감소하였다. 제안한 회로는 Samsung 0.18um CMOS 공정을 이용하여 HSPICE로 시뮬레이션 하였다.