• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.138-144
• /
• 2007

This paper introduces the design techniques of an IR module using the 2-D array un-cooled type infrared detector which is applied to the individual combat weapon. Considering the size and weight of the hand carried weapon system, we used a very small-sized detector and applied an adaptive temperature control algorithm so that the operation consumed with low power can be possible. We applied the AR(Auto Regressive) filter to improve the signal-to-noise ratio in a thermal image processing step. We also applied the plateau equalization and boundary enhancement techniques to improve the visibility for human visual system.

• Journal of Information Processing Systems
• /
• 제5권4호
• /
• pp.187-196
• /
• 2009

This paper presents compact cryptographic hardware architecture suitable for the Mobile Trusted Module (MTM) that requires low-area and low-power characteristics. The built-in cryptographic engine in the MTM is one of the most important circuit blocks and contributes to the performance of the whole platform because it is used as the key primitive supporting digital signature, platform integrity and command authentication. Unlike personal computers, mobile platforms have very stringent limitations with respect to available power, physical circuit area, and cost. Therefore special architecture and design methods for a compact cryptographic hardware module are required. The proposed cryptographic hardware has a chip area of 38K gates for RSA and 12.4K gates for unified SHA-1 and SHA-256 respectively on a 0.25um CMOS process. The current consumption of the proposed cryptographic hardware consumes at most 3.96mA for RSA and 2.16mA for SHA computations under the 25MHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.184-187
• /
• 2000

A network is an important portion of communications in these days. Because of many inconveniences of a wired-network, wireless solutions have been studied for many years. One of the results of those efforts is IEEE 802.11, wireless LAN. This paper briefly summarizes wireless LAN and specially focuses on the design of a network processor for the wireless LAN system. The processor has 16-bit instruction set suitably selected for network processing and low-power consumption. It is implemented and verified with a wireless LAN system model. The wireless LAN system is modeled in RTL excluding the RF module. The processor can be used in many wireless systems as a controller and utilized as a test module for the research of low-power schemes.

• 한국인터넷방송통신학회논문지
• /
• 제22권4호
• /
• pp.103-109
• /
• 2022

수면 중 발생되는 영유아의 높은 사망률 때문에 영유아 케어에 대한 중요성이 대두되고 있다. 본 연구에서는 블루투스 기술을 이용하여 스마트폰 으로 제어되는 Infant Care 디바이스의 초기 모델을 개발하였다. 개발된 모델은 MCU, 가속도 센서, 온도 측정 센서, 소리 센서, 블루투스 모듈, 카메라 모듈로 구성된다. 개발된 어플리케이션과 블루투스 기술을 사용하여 측정된 유아의 낙상 감지 신호 정보, 울음 감지 신호 정보, 발열 감지 신호 정보를 부모의 스마트폰과 컴퓨터 모니터를 통해 표출 하였다. Bluetooth Low Energy를 이용하여 저 전력 구동을 구현함으로서 구현된 Infant Care 시스템의 초기 설계모델의 유용성에 대해 확인 하였다.

• International Journal of Advanced Culture Technology
• /
• 제2권2호
• /
• pp.1-6
• /
• 2014

In this paper, we propose an intelligent streetlight system that has a complex sensor module of temperature, humidity, luminance and motion detection and controlled by the fuzzy logic based central monitoring system in order to get flexible and precise manipulation of the streetlight system in USN environment. The proposed streetlight system provides low power consumption and high efficiency by using sensed data from the complex sensor module, which were collected, processed, and analyzed by the fuzzy logic based central monitoring system. The performance of the proposed streetlight system is to be evaluated by a simulation study in terms of power savings and safety at the fields constructed as a test-bed under several suggested scenarios. Finally, we know that the proposed intelligent streetlight system can maximize the energy savings efficiently with the fuzzy logic based central monitoring system and selective remote dimming control by connecting it to the wireless ubiquitous sensor network (USN) using a Zigbee module.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.83-89
• /
• 2015

A ball strainer screen module, which is used for a condenser tube cleaning system, is a critical mechanical component for maintaining condenser cleanliness. Despite of this importance, not many research have been focused on this module because of its relatively low usage. Employing CFD, this study examines the implication of fluid velocity change and blockage ratio on the ball strainer screen velocity and the static pressure distribution. Through this study, the impact of blockage in the space between ball strainer screen modules is verified. Also, it is found that the ranges of non-dimensional velocity distribution and static pressure distribution decrease as blockage ratio becomes smaller.

• 정보통신설비학회논문지
• /
• 제9권1호
• /
• pp.29-34
• /
• 2010

In this study, we realized the broadband home gateway system of dual mode based upon EDR 2~3Mbps transmission speed and 300Mbps of 802.11n, In broadcasting and telecommunication convergence networks to deliver multimedia services, high-quality home. The bluetooth module is designed to use general low rate data speed service and the 802.11n module also is designed to use high rate speed service at various home network situation. The dual mode home gateway system, bluetooth and 802.l1n module, is well realized for many specification such as emission power, spurious power, impedance matching, frequency channel test.

• 한국광학회지
• /
• 제14권6호
• /
• pp.578-582
• /
• 2003

광섬유 브라그 격자와 광 분기 결합기로 구성된 새로운 구조의 파장 선택이 가능한 저가형 광신호 삽입/추출 모듈을 제안하였다. 제안된 저가형 광신호 삽입/추출 모듈은 동일한 동작을 수행하는 기존의 모듈에 비해 매우 단순한 구조를 가지고 있으며 경제적으로 구현이 가능하다는 장점을 갖고 있다. 제안한 모듈의 동작 특성을 실험적으로 측정 및 분석한 결과, 155 Mbps급의 전송속도를 갖는 WDM 전송 시스템 내에서 no-crosstalk power penalty를 가짐을 확인하였다. 출력 단에서 투과되는 채널의 삽입 손실은 3.5 ㏈ 이하이었고 추출 단으로 추출되는 신호의 삽입 손실은 21㏈ 이하로 비교적 높은 값을 가졌다. 반면에 추출된 신호의 추출 채널 고립비는 25 ㏈ 이상이었고 투과되는 신호의 투과 채널 고립비는 35 ㏈ 이상으로 상용화된 모듈과 비교해 거의 비슷한 수준의 값을 가짐을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1146-1147
• /
• 2008

PV Power Conditioning System (PCS) must have high conversion and low cost. Generally, PV PCS uses either a single converter or multilevel module integrated converter (MIC). Each of these approaches has both advantage and disadvantage. For a high conversion efficiency and low cost of PV module, this paper proposes series connection of module integrated DC-DC converter's output with PV panel. Output voltage of PV panel is connected to the output capacitor of flyback converter. Thus, converter's output voltage is added to the output voltage of PV panel. Isolated DC-DC converter generates only the difference voltage between the PV panel voltage and the required total output voltage. This method reduces power level of DC-DC converter and enhances the energy conversion efficiency compared with conventional DC-DC converter.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.68-74
• /
• 2008

This paper describes the causes and effects that have influence on thermoelectric generation. If heat transfer is unequal to thermoelectric modules, we could not get the maximum thermoelectric power. So, by experiment, we analysed the differences of power generation according to the state of the contact between thermoelectric module and heat source. And with the variation of heat transfer area, the generated power was analysed also. Using the experimental results we proposed a thermoelectric generation system.