• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1027-1035
• /
• 2014

휴대용 기기에서 가장 중요한 설계 요소는 소비 전력이다. 본 논문에서는 휴대용 온습도 측정기 설계 초기에 전력 소비 모델을 제시하고, 제시된 모델에 입각해 휴대용 온습도 측정기의 소비 전력을 설계한다. 이렇게 설계된 휴대용 온습도 측정기의 소비 전력을 사전 검증함으로써 제품 구현 전에 설계 검증을 완료하기 위한 전력 소비 설계 모델링 방안을 제시하고자 한다. 한편, 대기 모드에서 소비 전류를 효과적으로 감소시키기 위한 전력 소비 설계 개선 방안도 제시한다. 휴대용 온습도 측정기 구현을 통해 전력 소비 모델링에 입각한 설계 방법론의 타당성을 확인할 것이다.

• ETRI Journal
• /
• 제37권1호
• /
• pp.107-117
• /
• 2015

This paper presents an energy-efficient (low power) prime-field hyperelliptic curve cryptography (HECC) processor with uniform power draw. The HECC processor performs divisor scalar multiplication on the Jacobian of genus 2 hyperelliptic curves defined over prime fields for arbitrary field and curve parameters. It supports the most frequent case of divisor doubling and addition. The optimized implementation, which is synthesized in a $0.13{\mu}m$ standard CMOS technology, performs an 81-bit divisor multiplication in 503 ms consuming only $6.55{\mu}J$ of energy (average power consumption is $12.76{\mu}W$). In addition, we present a technique to make the power consumption of the HECC processor more uniform and lower the peaks of its power consumption.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.397-398
• /
• 2013

Fairchild Green Mode off line buck switch for low standby power consumption and high reliability is presented. By reducing operating current and optimizing switching frequency, 20mW power consumption is achieved. High performance trans-conductance amplifier and green mode function improve the ripple and regulation in the output voltage. The conventional $FPS^{TM}$ buck and novel Fairchild buck switch are compared to show the improvement of performance. Experimental results are showed using 2W evaluation board.

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.963-970
• /
• 2008

RFID/USN 기술을 이용하여 각종 계량기를 원격으로 검침하려는 시도가 계속되고 있다. 수도 검침의 경우 아직 무선으로 원격 검침하는 체계가 발표되었거나 상용화되지 못하였다. 본 논문에서는 원격검침을 위한 디지털 수도 계량기의 설계 및 구현을 기술한다. 자기장을 감지하는 홀 센서를 사용하여 검침하고 그 결과를 ZigBee 무선으로 게이트웨이에 전송한다. 배터리만으로 계량기의 내구연한을 견뎌야 하므로 저전력 설계가 필수적이다. 구현된 계량기의 전력 소모량을 분석하여 3V, 3000mAh 용량 배터리, 2개로 8년의 내구연한을 견딜 수 있음을 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.222-225
• /
• 2006

A custom-made display driver for an electronic paper is presented, which has high-voltage multilevel output capability and extremely low power consumption. An original level-shifter circuit can effectively reduce the power consumption and the chip area. This driver was implemented to a Quick-Response Liquid Powder Display (QR-LPD) and the image quality and power consumption was estimated.

• 전기전자학회논문지
• /
• 제12권2호
• /
• pp.75-80
• /
• 2008

There are many researches to reduce power consumption of battery-operated Transceiver for 2.4 GHz smartRF applications. However, components such as processor, memory and LCD based power managements reach the limit of reducing power consumption. To overcome the limit, this research proposes novel low-power Transceiver and transceiver Hardware Design. Experimental results in the real smartRF Transceiver show that the proposed methods can reduce power consumption additionally than component based power managements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.167-181
• /
• 2001

A stepwise driving method was used for reducing the AC power consumption in a TFT-LCD. The AC power takes the largest portion of the total power consumption of a TFT-LCD. Experimental results confirmed that the AC power saving efficiency reached up to 75% when a 5-stepwise driving with each step time of $2\mu$ sec was applied to a 14.1 inch-diagonal XGA TFT-LCD. The second largest component of power consumption called the DC power comes from the quiescent currents in Op-amps. A simple and efficient architecture was proposed in this work to reduce this DC power consumption: Half of the Op-amps have the 5V-supplies, and the rest half have the 10V-supplies, and two Op-amps are shared by adjacent two channels. Measurements of test circuits showed that this simple method could reduce over 40% of the DC power consumption..

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.402-403
• /
• 2009

A variety of power reduction technologies is introduced and the benefits of the technologies are discussed. PenTile$^{(R)}$ DBLC (Dynamic Brightness LED Control) combined with SABC (Sensor-Based Adaptive Brightness Control) enables to achieve the average LED power consumption to one third. The panel power reduction of 25% can be achieved with low power driving technology, ALS (Active Level Shifter). MIP (Memory In Pixel) is expected to be useful in transflective display because the whole display area can be utilized in reflective mode with power consumption of 1mW.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.44-47
• /
• 2011

In this paper, we propose context-aware based on Low Power Sensing Algorithm. The proposed sensing algorithm reduces power consumptions using low-power sensing algorithms and low-power sensing protocols. Experimental results show that the average power consumption of the proposed method is up to half consumption that of the conventional method.

• 디지털산업정보학회논문지
• /
• 제4권1호
• /
• pp.9-16
• /
• 2008

This paper presents a frequency selection algorithm for minimization power consumption of processor in Mobile System. The proposed algorithm has processor designed low power processor using clock gating method. Clock gating method has improved the power dissipation by control main clock through the bus which is embedded clock block applying the method of clock gating. Proposed method has compared power consumption considered the dynamic power for processor, selected frequency has considered energy gain and energy consumption for designed processor. Or reduced power consumption with decreased processor speed using slack time. This technique has improved the life time of the mobile systems by clock gating method, considered energy and using slack time. As an results, the proposed algorithm reduce average power saving up to 4% comparing to not apply processor in mobile system.