• 대한전자공학회논문지TC
• /
• 제48권4호
• /
• pp.69-76
• /
• 2011

본 논문은 지연 QoS (delay Quality of Service)에 대한 제약이 주어졌을 때의 시스템 용량을 정량화 할 수 있는 분석모델을 제시하고, 이를 바탕으로 다중사용자 저전력 무선통신 시스템에서 사용자 다중화가 지연 QoS에 미치는 영향을 분석하였다. 이를 위해, 한 프레임에서 스케줄 되는 사용자 수를 다중화도 (degree of multiplexing)이라 정의하고, 다중화도가 지연 서비스 품질과 시스템 용량 간의 관계에 미치는 영향을 분석하였다. 또한, 저전력 통신환경에서 에너지 효율성을 고려할 때 최적의 다중화도가 어떻게 변화하는지를 확인하였다. 마지막으로 모의실험을 통하여, 최적의 다중화도를 이용할 때 상당한 성능이득을 얻을 수 있음을 확인하였다.

• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.1003-1010
• /
• 2018

지자기 센서 기반의 차량검지 시스템에서 지자기 센서 노드는 복잡한 케이블 연결 없이 쉽게 도로에 매설할 수 있도록 무선 통신을 이용하는 방식으로 설계되며, 시스템의 유지보수 비용을 줄이기 위해서는 도로에 매설된 지자기 센서 노드의 배터리 수명을 늘리는 것이 중요하다. 본 논문에서는 차량검지 시스템에서의 차량 검지 정보의 실시간성을 보장하면서 지자기 센서 노드의 에너지 소모를 줄일 수 있는 저전력 TDMA 프로토콜을 제안한다. 성능분석에서는 실제 지자기 센서 기반 차량검지 시스템에서의 지자기 센서 노드의 전력 소모를 측정하였으며, 시스템의 시간동기를 유지하면서도 배터리 효율을 62% 향상함으로써 약 5년간 배터리 교체없이 사용할 수 있음을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.231-233
• /
• 2005

For the low-power design of the mobile multimedia system architecture, this paper modeling the mobile multimedia system and analysis the power consumption profile about the whole communication environment. The mobile system model consist of air interface, RIP front-end, base-band processing module and human interface. For the result of power consumption profile analysis, the power consumption of multimedia processing is above 60% compare to the whole power consumption in mobile multimedia system. To minimize the power consumption in processing module which consumes the large power, this paper proposed the Microscopic DVS technique which applies the optimum voltage for the each multimedia frame. For the simulation result, proposed power minimization technique reduce the power consumption about 30%.

• 한국멀티미디어학회논문지
• /
• 제23권2호
• /
• pp.293-300
• /
• 2020

Since the communication networks like the Internet collapses at disaster and calamity sites, a maintenance system that can be operated offline is required for the maintenance of various facilities. In this paper, we propose a system that memory tags attached on the facilities may transmit the emergency manual to a smart-phone, and the smart phone displays it off-line. The main issue is to design low energy mode memory tags. This study presents two kinds of methods and analyzes each's energy consumption mode. The first one is to develop memory tags by using one chip, and the next one is to design memory tags by forming multi-modules. Both ways show proper application fields under the low energy mode. This research selects the off-line maintenance system by using one chip design, and proposes the direction of contents for enhancing the effectiveness of the system. And we expect that this memory tags will be valuable for disaster scenes as well as battle fields.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.649-658
• /
• 2018

In this paper, we propose a mechanical contact inner tap inspection system that can inspect the defect of the inner tap immediately after inner tap is processed within the machining center. The inspection module has the collet chuck structure, so it can mounted on the main spindle of the machining center during inspection. It was developed with a focus on inspection for tap having 20 mm depth which is primarily fabricated in automotive parts and has a double sided PCB-type control system including sensing function based on Zigbee module, micom and IR sensor for wireless transmission of measured data with low power operation, and also a battery for supplying electric power. The current consumption is 46.8mA in the inspection operation mode and 0.0268mA in the power saving mode for 3.7V of the applied power source, so that 30,000 times or more inspection can be performed with assumed 5 seconds inspection time for one tap. Experiments in test jig system and actual machining center confirm that the proposed inner tap inspection system can be applied to the batch process of simultaneous inspection after tapping in the machining center.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.210-216
• /
• 2004

In this paper, we propose a noncoherent On-Off Keying (OOK) Ultra Wide Band (UWB) system based on power detection with noise power calibration for low power applications. The proposed UWB system achieves good bit error rate performance which is favorably comparable to that of the system using the ideal adaptive threshold, while maintaining simple receiver structure, In addition, low power Analog Front-End (AFE) blocks for the proposed noncoherent UWB transceiver are proposed and verified using CMOS technology. Simulation results on the pulse generator, delay time generator and 1-bit Analog-to-Digital (AID) converter show feasibility of the proposed UWB AFE system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.313-314
• /
• 2007

AlN is used a wide variety of applications such as electroacoustic devices, blue diode and metal-insulator-semiconductor structures. AlN thin films were deposited on Si substrates by rf sputter technique with low temperature process. The orientation and morphology of AlN thin films at various power in the range from 150 to 300 w was studied. X-ray diffraction (XRD), full width at half-maximum (FWHM) and field emission scanning electron microscopy were employed to characterize the deposited films. The c-axis orientation along (002) Plane at experimental results was enhanced with the increasing of the rf power from 150 to 300 w and the surface morphology of the films showed a homogeneous and nano-sized microstructure.

• 한국전자통신학회논문지
• /
• 제10권4호
• /
• pp.491-497
• /
• 2015

본 논문에서는 능동형 RFID 방식의 태그와 리더로 구성된 대기 전력 제어 모듈을 설계하고 구현한다. 태그와 리더는 C8051 MCU와 CC2500으로 구성된 RF모듈을 내장하고 있으며 리더에는 대기 전력 제어 콘센트가 부착되어 있다. 리더는 송신 패킷 인식 여부에 따라 릴레이를 제어한 후 전원 공급을 차단하여 대기 전력으로 소비되는 전력을 감소시키며 저 전력 패킷 예측 알고리즘이 적용되어 태그와 리더의 전력 소모를 낮추었다. 실험 결과, 리더의 패킷 송, 수신 여부에 따라 대기 전력 제어 콘센트의 릴레이를 동작시켜 대기 전력을 제어할 수 있음을 확인하였다. 또한 RSSI값에 따라 태그와 리더 사이의 동작 거리 설정이 가능하며, 콘센트의 대기 시간 동안 리더에서 작동하는 수신 Duty Cycle을 설정함으로써 리더에 소모되는 전력을 절감할 수 있음을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.685-688
• /
• 2002

This paper deals with new scheme of remote load control management system with communication from RCU to controller using power line Power line communication is useful for economical data link but various problems and limitations are caused in using power lines for communications channel. A power line is not so good in the commercial electrical power, and its load noise and high frequency noise are so much. To decrease these noise, we used the FSK(Frequency Shift Keying) modulation method. The experimental results show that the proposed system in this paper is compatible with the conventional system with low cost and the feasibility is very high for new or remodeling plant.

• Journal of information and communication convergence engineering
• /
• 제20권4호
• /
• pp.295-302
• /
• 2022

This paper contains the development of a smart power device designed to collect load power data from industrial manufacturing machines, predict future variations in load power data, and detect abnormal data in advance by applying a machine learning-based prediction algorithm. The proposed load power data prediction model is implemented using a Long Short-Term Memory (LSTM) algorithm with high accuracy and relatively low complexity. The Flask and REST API are used to provide prediction results to users in a graphical interface. In addition, we present the results of experiments conducted to evaluate the performance of the proposed approach, which show that our model exhibited the highest accuracy compared with Multilayer Perceptron (MLP), Random Forest (RF), and Support Vector Machine (SVM) models. Moreover, we expect our method's accuracy could be improved by further optimizing the hyperparameter values and training the model for a longer period of time using a larger amount of data.