• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• 품질경영학회지
• /
• 제30권3호
• /
• pp.203-236
• /
• 2002

Environmental Performance Evaluation(EPE) is a key process of Corporate Environmental Management. This paper presents the results of an empirical survey on the status of current practices in EPE of Korean firms. Based on a corporate environmental management(CEM) model, which is initially developed by Hibbitt and Kamp-Roelands(2001) and modified in terms of EPE, the survey is peformed on the population of Korean firms, which are composed of firms certified as "environmentally friendly" by Korean government and/or certified under Is014001, and compares its results with those of Europe's. Although the relatively low response rate and some methodological limitations makes us be cautious about the interpretation, the results shows many interesting aspects of the current states of Korean firms' EPE practices. That is, the levels of EPE implementation in the environmentally-leading companies of Korea are almost the same as that of European companies, I. e., in the-final-part-of-developing-stage (3rd stage) level of the CEM model. It is also shown that as In Europe's case, Korean firms are also moving slower in external relationships than in internal control and management, are more developed in the parameters like environmental policy, Internal control, Information system, which are requirements of certification under Is014001, than in parameters like life cycle analysis and full cost accounting, which requires more research efforts, etc.orts, etc.

• 한국분말재료학회지
• /
• 제28권6호
• /
• pp.470-477
• /
• 2021

Energy storage systems should address issues such as power fluctuations and rapid charge-discharge; to meet this requirement, CoFe₂O₄ (CFO) spinel nanoparticles with a suitable electrical conductivity and various redox states are synthesized and used as electrode materials for supercapacitors. In particular, CFO electrodes combined with carbon nanofibers (CNFs) can provide long-term cycling stability by fabricating binder-free three-dimensional electrodes. In this study, CFO-decorated CNFs are prepared by electrospinning and a low-cost hydrothermal method. The effects of heat treatment, such as the activation of CNFs (ACNFs) and calcination of CFO-decorated CNFs (C-CFO/ACNFs), are investigated. The C-CFO/ACNF electrode exhibits a high specific capacitance of 142.9 F/g at a scan rate of 5 mV/s and superior rate capability of 77.6% capacitance retention at a high scan rate of 500 mV/s. This electrode also achieves the lowest charge transfer resistance of 0.0063 Ω and excellent cycling stability (93.5% retention after 5,000 cycles) because of the improved ion conductivity by pathway formation and structural stability. The results of our work are expected to open a new route for manufacturing hybrid capacitor electrodes containing the C-CFO/ACNF electrode that can be easily prepared with a low-cost and simple process with enhanced electrochemical performance.

• Advances in environmental research
• /
• 제3권3호
• /
• pp.199-206
• /
• 2014

Dewatering is an extremely important step in wastewater treatment process to reduce the final sludge volume in order to minimize the cost of sludge transportation and disposal. In the present study, the effect of different sludge solids content (1, 2 and 3.8%) on the dewaterability of anaerobically digested sludge using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was studied. The pH reduction rate was higher during initial process in the sludge having low solids content, but after 48 h of bioleaching, similar pH of below 3 was observed with all the different solids content. Bio-oxidation rate of $Fe^{2+}$ was initially higher in sludge with low solids content, but 100% $Fe^{2+}$ was oxidized within 60 h in all the three treatment levels. Compared to the control, specific resistance to filtration was reduced by 75, 78 and 80% in the sludge with a solids content of 1, 2 and 3.8% respectively, showing improvement in dewaterability with an increase in sludge solids content. Sludge effluent quality and sludge settling rate were also improved in treatments with higher solids content after the bioleaching process.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.753-762
• /
• 2018

The present study set out to investigate the adsorption of Cd(II) ions in an aqueous solution by using Peanut Husk Biochar (PHB). An FT-IR analysis revealed that the PHB contained carboxylic and carbonyl groups, O-H carboxylic acids, and bonded-OH groups, such that it could easily adsorb heavy metals. The adsorption of Cd(II) using PHB proved to be a better fit to the Langmuir isotherm than to the Freundlich isotherm. The maximum Langmuir adsorption capacity was 33.89 mg/g for Cd(II). The negative value of ${\Delta}G^o$ confirm that the process whereby Cd(II) is adsorbed onto PHB is feasible and spontaneous in nature. In addition, the value of ${\Delta}G^o$ increase with the temperature, suggesting that a lower temperature is more favorable to the adsorption process. The negative value of ${\Delta}H^o$ indicates that the adsorption phenomenon is exothermic while the negative value of ${\Delta}S^o$ suggests that the process is enthalpy-driven. As an alternative to commercial activated carbon, PHB could be used as a low-cost and environmentally friendly adsorbent for removing Cd(II) from aqueous solutions.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.111-118
• /
• 2020

Recently, bioenergy research using microalgae, one of the most promising biofuel sources, has attracted much attention. Cell disruption, which can be classified as physical or chemical, is essential to extract functional ingredients from microalgae. In this study, we investigated the cell disruption efficiency of Chlorella sp. using low-frequency non-focused ultrasound (LFNFU). This is a continuously physical method that is superior to chemical methods with respect to environmental friendliness and low processing cost. A flat panel photobioreactor was employed to cultivate Chlorella sp. and its growth curve was fitted both with Logistic and Gompertz models. The temporal change in cell reduction by cell disruption using LFNFU was fitted with a Logistic model. The experimental conditions that were investigated were the initial concentration of microalgal cells, relative amplitude of output ultrasound waves, processing volume of microalgal cells, and initial pH value. The optimal conditions for the most efficient cell disruption were determined through the various tests.

• 한국주거학회논문집
• /
• 제13권4호
• /
• pp.81-88
• /
• 2002

The purpose of this study is to accumulate basic data to establish planning direction and planning factors for the environment-friendly apartment complex. For this purpose, the survey has been conducted to residents living in an apartment housing and graduate students, architects and research experts in the field. The major findings of this study are as follows; 1) The basic concept of planning factors for environment-friendly apartment complex are energy saving, resources saving, minimizing environment pollution, natural harmony, regional identity and pursuit of residents' health & amenity. 2) For the planning factors of environment-friendly apartment complex, the residents had a great regard for aspect of Low-Impact (energy saving, resources saving, minimizing environment pollution). The experts, on the other hand, had a great regard for aspect of High-contact (natural harmony, regional identity). 3) It was increase of prime cost that the residents and experts regarded as the most important problem of planning and purchasing of environment-friendly apartment. It thus appears that the promotion of environmental consciousness of residents taking in the portion of increased cost is crucial parts and also that the role of the connected aspects such as administration, construction companies and residents must be redefined in order to manage problems caused in process of the development of it.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.149-154
• /
• 2007

Now, in Korea, the performances of the building service equipment relay on the individual superintendent's share for the assessment of performance, fault detection, deterioration diagnosis of the building service equipment. As the result, very different quality of the performance or the durability of equipment is being obtained with his skill and effort and it is also not easy to assess that quality. This finally lead to the waste of labor force and the operating cost due to the high-cost, low-efficiency system. How to construct the N-BMS was considered to save energy, resource and to conserve performance of building service equipment. The FEMIS, facility, energy/environmental management & information system, for building service offer management process integrated with BAS, FMS and EMS and so on.

• 대한토목학회논문집
• /
• 제41권3호
• /
• pp.289-296
• /
• 2021

국내 건설산업은 에너지와 자원의 사용 및 오염물질 배출과 같은 환경 부담을 줄이고 쾌적한 환경을 조성하기 위한 목적으로 건축물의 환경성을 평가하는 녹색건축 인증제도를 시행하고 있다. 하지만 인증획득 절차의 시간이 오래 걸리고 과정이 복잡하며 인증 항목별로 자재의 경제성을 고려할 수 없는 점으로 인해 실무에서는 인증에 어려움을 겪는 문제점이 있다. 따라서 본 연구에서는 녹색건축인증의 문제점을 해결하기 위해 녹색건축 인증제도 인증 항목 중 실내공기 오염물질 저방출 제품의 적용을 그 대상으로 하고 생애주기비용 개념을 고려하여 자재 데이터베이스를 구축하였으며 경제성 평가의 최적화 기법으로는 유전 알고리즘을 활용하여 최적의 자재를 선정할 수 있는 경제성 평가모델을 개발하였다. 이를 실제 비주거용 건축물 사례에 적용하여 기존 비용과 비교한 결과 평균 74.5 %의 비용 절감률을 나타내어 본 모델을 녹색건축인증에서 경제적 효율성이 있는 도구로써 활용 가능할 것으로 판단된다.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.15-23
• /
• 2010

Bio-ethanol is the most potential next generation automotive fuel for reducing both consumption of crude oil and environmental pollution from renewable resources such as wood, forest residuals, agricultural leftovers and urban wastes. Lignocellulosic based materials can be broken down into individual sugars. Therefore, saccharification is one of the important steps for producing sugars, such as 6-C glucose, galactose, mannose and 5-C xylose, mannose and rhamnose. These sugars can be further broken down and fermented into ethanol. The main objective of this research is to study the feasibility and optimize saccharification and fermentation process for the conversion of lignocellulosic biomass to low cost bioethanol.