• Title/Summary/Keyword: Low temperature treatment

Search Result 1,963, Processing Time 0.031 seconds

Sound Absorption Property of Heat-Treated Wood at A Low Temperature and Vacuum Conditions

  • Byeon, Hee-Seop;Park, Jung-Hwan;Hwang, Kyo-Kil;Park, Han-Min;Park, Beyung-Soo;Chong, Song-Ho
    • Journal of the Korean Wood Science and Technology
    • /
    • v.38 no.2
    • /
    • pp.101-107
    • /
    • 2010
  • Heat treatment was performed to improve sound absorption properties for four tree species; Tulip tree, Korean Paulownia, Red pine and Costata birch, at temperature of $175^{\circ}C$ and $200^{\circ}C$under vacuum condition. Sound absorption properties of two kinds of boards, which were in radial and tangential sections, were measured under a frequency range of 100 to 3200 Hz by the two microphone transfer function method. It was found that sound absorption properties were increased by heat treatment and the efficiency was higher at $200^{\circ}C$ than that at $175^{\circ}C$. Even Costata birch had a little effect on low temperature of $175^{\circ}C$, $200^{\circ}C$ heat treatment for sound absorption property, the efficiencies of sound absorption were 14, 19%, respectively. The efficiencies of sound absorption ranged 22 to 120% for heat-treated Tulip tree, Korean Paulownia.

Effect of Aging Treatment on the Microstructure and Low Temperature Tensile Properties in 5083 Aluminum Alloy Weldments (5083 Al합금 용접재의 조직 및 저온 인장성질메 미치는 시효처리의 영향)

  • Lee, T.C.;Lee, H.W.;Joo, D.W.;Lee, J.H.;Sung, J.H.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.13 no.1
    • /
    • pp.1-9
    • /
    • 2000
  • The microstructural characteristics and low temperature tensile properties between $25^{\circ}C$ and $-196^{\circ}C$ for as-welded and age hardened specimen by using Al 5083-H321 for base metal, 5083-5356 and 5083-4043 weldments have been investigated. The hardness of 5083-5356 weldment decreases with aging treatment, whereas the weld region of 5083-4043 weldment shows remarkable increase in hardness after aging due to the precipitation of fine Si particle at the grain boundaries and interiors. Low temperature tensile properties of 5083 AI base metal, 5083-5356 and 5083-4043 weldments appear to be the increment of tensile strengths and elongations at the room temperature and $-196^{\circ}C$, while the decrement of tensile properties around $-50^{\circ}C$ is shown. Through the observation of fine serration to fracture in the stress-strain curve and tensile fractography, the increment of localized deformation leading to promote the neck initiation and the increment of the dimple size cause to decrease in tensile strengths and elongations around $-50^{\circ}C$. For the tensile specimen of the 5083 base metal, 5083-5356 and 5083-4043 weldments, the reason to increase in elongation after solution and aging treatment is the diminishment of fine pit, the resolution of Mg into the matrix and the spheridization of the eutectic Si.

  • PDF

Enhancement of Plant Growth and Suppression of Damping-off of Cucumber by Low Temperature Growing Pseudomonas fluorescens Isolates (저온 생장성 Pseudomonas fluorescens M45와 MC07을 이용한 오이의 생육촉진과 모잘록병의 방제)

  • 염주립;박창석
    • Korean Journal Plant Pathology
    • /
    • v.11 no.3
    • /
    • pp.252-257
    • /
    • 1995
  • Growth rates of the low temperature growing isolates, Pseudomonas fluorescens M45 and MC07, reached maximum stationary phase within 50 hrs at the low temperature, 4$^{\circ}C$. But an ordinary biocontrol agent P. putida Pf3 did not reach logarithmic growth phase until 80 hrs. The culture filtrates of M45 and MC07 significantly inhibited the mycelial growths of Pythium ultimum, Rhizoctonia solani and Phytophthora capsici. Detached cotyledons of cucumber grown on Murashige and Skoog agar medium were much enhanced in their growth, compared to those without the filtrates. Population densities of M45 and MC07 in the rhizosphere at 14$^{\circ}C$ were more stable than at 27$^{\circ}C$. When M45 and MC07 were treated into soil, the population density of MC07 continuously increased up to 9 days after treatment, and sustained the initial inoculum density up to 60 days. Cucumber damping-offs caused by P. ultimum and R. solani were significantly reduced by applying M45 as seed-inoculant and by soil treatment with MC07. The combined treatment of M45 and MC07 provided greater effect in reducing the disease incidence than that obtained by single treatments.

  • PDF

Effect of Spermine Treatment on Growth, Yield, and Quality of Strawberry under Low-Temperature Condition (이상 저온 조건에서 Spermine 처리가 딸기의 생육과 수량 및 품질에 미치는 영향)

  • Lee, Gyu-Bin;Lee, Jung-Eun;Choe, Yun-Ui;Park, Young-Hoon;Choi, Young-Whan;Kang, Nam-Jun;Kang, Jum-Soon
    • Journal of Environmental Science International
    • /
    • v.27 no.3
    • /
    • pp.195-202
    • /
    • 2018
  • The present study was carried out to investigate the effects of spermine treatment on the growth, yield and quality in strawberry under low-temperature condition, and thereby develop a chemical method to minimize damages by low temperature in greenhouse cultivation. Spermine treatment significantly improved the growth of strawberry in terms of leaf number, leaf area, leaf length, leaf diameter, plant height and plant weight. The highest effect was observed in the 250 uM spermine treatment and the effect tended to be maintained during the entire growth period of 90 days. Fresh weight and dry weight were significantly different depending on the concentrations of spermine. Strawberry plants treated with 250 uM spermine showed higher fresh weight and dry weight compared to untreated control plants during the growth period. Fruit weight, fruit length and fruit diameter were relatively higher when treated with $100{\mu}M$ spermine compared to other treatments. The fruit yield was the highest with 14 fruits per plant at $250{\mu}M$ spermine treatment and the coloration of the fruit was the best at this treatment with the Hunter a and b values of 46.56 and 28.75, respectively. The hardness of strawberry fruit tended to increase higher than 2N at $250{\mu}M$ and $500{\mu}M$ 250 uM spermine treatment. The sugar content of strawberries treated with $250{\mu}M$ spermine was $9.5^{\circ}$ Bx which was $1.6^{\circ}$ Bx higher compared to that in untreated control. However, spermine treatment did not affect the acidity of fruit and it remained 0.68-0.76% regardless of treatment concentrations. These results suggest that spermine treatment has a positive effect on the growth and productivity of strawberry fruit under abnormal low-temperature condition. The positive effect was the highest at $250{\mu}M$ spermine treatment and gradually decreased in the order of $100{\mu}M$, $500{\mu}M$, and untreated control.

Effects of Low Air Temperature and Light Intensity on Yield and Quality of Tomato at the Early Growth Stage (정식 초기의 저온·저일조가 토마토 수량·품질에 미치는 영향)

  • Wi, Seung Hwan;Yeo, Kyung-Hwan;Choi, Hak Soon;Yu, Inho;Lee, Jin Hyong;Lee, Hee Ju
    • Journal of Bio-Environment Control
    • /
    • v.30 no.4
    • /
    • pp.448-454
    • /
    • 2021
  • This study was conducted to the effect of low air temperature and light intensity conditions on yield and quality of tomato at the early stage of growth in Korea. Inplastic greenhouses, low temperature and low temperature with shade treatments were performed from 17 to 42 days after plant. Tomato growing degree days were decreased 5.5% due to cold treatment during the treatment period. Light intensity decreased 74.7% of growing degree days due to shade. After commencing treatments, the plant growth decreased by low temperature and low radiation except for height. Analysis of the yield showed that the first harvest date was the same, but the yield of the control was 3.3 times higher than low temperature with shade treatment. The cumulative yields at 87 days after transplanting were 1734, 1131, and 854 g per plant for control, low temperature, and low temperature with shade, respectively. The sugar and acidity of tomatoes did not differ between treatment and harvesting season. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of the photosynthetic rate. The results showed that the maximum photosynthetic rate, J (electric transportation rate), TPU (triose phosphate utilization), and Rd (dark respiration rate) did not show any difference with temperature, but were reduced by shading. Vcmax (maximum carboxylation rate) was decreased depending on the low temperature and the shade. Results indicated that low temperature and light intensity at the early growth stage can be inhibited the growth in the early stage but this phenomenon might be recovered afterward. The yield was reduced by low temperature and low intensity and there was no difference in quality.

Effect of Deformation Temperature and Manganese Contents on the Tensile Properties of Fe-Cr-Ni-Mn Duplex Stainless Steel (Fe-Cr-Ni-Mn 2 상 스테인레스강의 인장성질에 미치는 변형온도 및 Mn 함량변화의 영향)

  • Kang, C.Y.;Sung, J.H.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.4 no.4
    • /
    • pp.44-52
    • /
    • 1991
  • The effect of deformation temperature and manganes contents on the tensile properties of duplex stainless steels with the structure of both ferrite and austenite were investigate. For this investigation, Fe-19% Cr-5% Ni-4~8% Mn alloys were prepared. The result obtained from this experiment are summerized as follows. With decreasing deformation temperature, tensile strengths of duplex stainless steel increased. Elongation showd to be increased and then decreased after representing the highest value at specific temperature. Tensile properties of duplex stainless steel were controlled by TRIP behavior in this experimental range of austenite contents. Tensile strengths decreased with increasing Mn contents. With increasing Mn contents, elongation decreased in the high temperature region, but increased in the low temperature region. The peak temperature representing the maximum elongation were changed to low temperature and the width of peak appeared to be broaden with increasing Mn contents.

  • PDF

Effects of Seed Pretreatment and Environment Controls on Germination of Atractylodes japonica Seeds (종자 전처리 및 환경조절이 삽주 종자 발아에 미치는 영향)

  • Jeon, Kwon Seok;Song, Ki Seon;Yoon, Jun Hyuck;Kim, Chang Hwan;Kim, Jong Jin
    • Korean Journal of Medicinal Crop Science
    • /
    • v.21 no.5
    • /
    • pp.394-400
    • /
    • 2013
  • This study was carried out in order to examine the germination characteristics of Atractylodes japonica seeds, and it was to develop the more efficient pre-treatment and production system of the seeds. Experiment was performed by two ways-temperature control (10, 15, 20, $25^{\circ}C$) and shading treatment (full sunlight, 35, 50, 75, 95% of full sunlight). Seed pre-treatment before the each experiment was carried out by temperature (with low temperature and wetting treatment (LTW) for 0, 15, 30, 45 and 60 days) and shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 48 hours). Seeds of A. japonica were germinated well under temperature control (overall 85.3~100%), especially high temperature. And, the seeds pre-treated with LTW for 45 days germinated with a 100% success rate. Under the surveying shading treatment, the highest germination rate was 95.8% with DRT and overall 63.2~95.8%. Germination rate under seeds with WS was 63.2~7.8%. As a result of surveying the whole experiment, A. japonica seeds don't need to pre-treat cause of high germination, but if it is performed with LTW for a certain period of time, it would be more productive.

Effects of Low Air Temperature and Low Radiation Conditions on Yield and Quality of Hot Pepper at the Early Growth Stage (생육 초기의 저온·저일조가 고추의 수량과 품질에 미치는 영향)

  • Wi, Seung Hwan;Lee, Hee Ju;Yu, In Ho;Jang, Yoon Ah;Yeo, Kyung Hwan;An, Se Woong;Lee, Jin Hyong;Kim, Sung Kyeom
    • Journal of Environmental Science International
    • /
    • v.29 no.10
    • /
    • pp.989-996
    • /
    • 2020
  • This study was conducted to determine the effect of low temperature and low radiation conditions on the yield and quality of hot pepper at an early growth stage in Korea. In plastic greenhouses, low temperature, low temperature with covered shading treatments were set 17 to 42 days after transplanting. The pepper growing degree days decreased by 5.5% due to the low temperature during the treatment period. Radiation decreased by 74.7% due to the covered shading. After commencing treatments, pepper plant growth decreased with low temperature and low radiation. Analysis of the yield showed that the first harvest was delayed by low radiation. The cumulative yields of 119 days after transplanting were 1,956, 2,171, and 2,018 g/㎡ for control, low temperature, and low temperature with low radiation respectively. Capsaicin and dihydrocapsaicin concentrations in pepper fruit decreased with low temperature and low radiation. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of photosynthesis. Results showed that the maximum photosynthetic rate, Vcmax (maximum carboxylation rate), J (electric transportation rate), and TPU (triose phosphate utilization) decreased at low temperatures; the maximum photosynthetic rate, J, and gm (dark respiration rate) were reduced by shading. These results indicate that low temperature and low radiation can retard early growth, yield, and quality, but these can also be recovered 119 days after planting. Based on the results, the yield and quality of pepper can recover from abiotic stresses with proper cultivation.

Study of the present situation on the termite control of wooden structures(II) - Focused on the case of Japan (목조건축물의 흰개미 방제에 대한 국외 현황조사(II) - 일본의 사례를 중심으로)

  • Jeong, Soyoung
    • 보존과학연구
    • /
    • s.34
    • /
    • pp.84-99
    • /
    • 2013
  • There are more than 2,900 different species of termites in the world, and just there are 23 species in Japan. They caused more severe infestation compared with Korea. When a structure has become infested with termites, it is important that appropriate action must be taken: the chemical pest control (fumigation, soil termiticide treatment, bait system etc.) or the non-chemical pest control (low oxygen treatment, carbon dioxide treatment, high/low temperature treatment etc.). Especially, there were attempts to make practical protocol of various alternatives since the fumigant(methyl bromide) had been phased out in 2005 in Japan, and practically non-chemical methods would be effective alternatives for some cases, where the scale of infestation is small and limited and when long treatment is possible. But most of all, it is important that the process of pest control is made according to each species of termites with consideration for different characteristics of termites.

  • PDF

Studies on the Manufacturing of Soft Ginseng Drink Part I. Purification procedure of raw ginseng extracts (인삼청량음료 제조에 관한 연구)

  • 양재원;성현순;박명한;김우정;홍순근
    • Journal of Ginseng Research
    • /
    • v.4 no.1
    • /
    • pp.72-87
    • /
    • 1980
  • Red ginseng tails were extracted with ethanol solutions over a range of concentrations and temperature conditions. Investigations were carried out to study the effects of treatments on yields, soluble solids, saponin and precipitate occured in red ginseng extract beverage during storage. It was found that: (1) Higher concentration of ethanol at low temperature resulted in less yield of crude extract (2) The amount of precipitate in the non-purified extract beverage were less with decrease in ethanol concentration used (3) The treatment for purification of extracts and storage of purified extract at 37$^{\circ}C$ for 6 months had no effect on HPLC chromatogram pattern of saponins (4) The amount of purified extract decreased by purification treatment and more decrease was found as the temperature and concentration of ethanol increased. For Preparation of red ginseng extract beverage, the treatment of extracts with ethanol at low temperature was found to be more effective to minimize precipitation in tile beverage.

  • PDF