• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.268-273
• /
• 2016

Potassium is well-known to improve turfgrass tolerance to environmental stresses such as low temperature and drought stress. Low mowing height reduces leaf area of turfgrass that is main place for photosynthesis and carbohydrate production. Closely-mowed turf would suffer from summer decline by low level of carbohydrate resulted from low photosynthesis of reduced leaf area. The objective of the study is to investigate K rate and mowing height for Kentucky bluegrass. The K rate treatments were 5, 10, and $20g\;K_2O\;m^{-2}$ for the low, medium and high K rates, respectively. The bi-weekly mowing treatment was made for treatments. Mowing was implemented at 40 and 100 mm using a rotary mower. Regardless K rates, the high mowing height would be required when the air temperature is higher than $28.5^{\circ}C$ and high turfgrass quality of Kentucky bluegrass is needed. When the air temperature is optimal for cool-season grass, the high mowing height and the low K rate is needed for the root length of Kentucky bluegrass.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.262-269
• /
• 2013

This study was carried out in order to examine the germination characteristics of Ligularia fischeri seeds, and it was to develop the more efficient pre-treatment and production system of the seeds. It was performed by two ways - temperature control (10, 15, 20 and $25^{\circ}C$) and shading treatment (Full sunlight, 35%, 50%, 75% and 95% of full sunlight). Seed pre-treatment before the each experiment was carried out by temperature (with low temperature and wetting treatment (LTW) for 0, 15, 30, 45 and 60days) and shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 2 days). Seeds of L. fischeri were, regardless of seed pre-treatment, germinated well at $10^{\circ}C$ and the more temperature went up, the more germination rate went down. As a result of surveying shading treatment, 75% shading with DRT was the highest germination rate (68.1%) and 95% shading with WS was the lowest germination rate (48.6%). It was showed over-growth under 95% shading treatment experiment and withered in the full sunlight. As a result of surveying the whole experiment, L. fischeri seeds pre-treated with LTW for 15 days germinated well at $10^{\circ}C$ and under 50~75% shading treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.15
• /
• pp.1-31
• /
• 1974

Introducing genes for earliness of wheat varieties is important to develop early varieties in winter wheat. In oder to obtain basic informations on the response of heading to the different day length and temperature treatments and on the inheritance of heading dates, experiments were conducted at the field and greenhouse of the Crop Experiment Station, Suwon. Varieties used in this experiments were, early variety Yecora F70, medium varieties Suke #169, Parker and Yukseung #3, and late varieties Changkwang, Bezostaia, Sturdy and Blueboy. The parents and F$_1$s of partial diallel crosses of above eight varieties were subjected the following four different treatments; 1. high temperature and long day, 2. high temperature and short day, 3. low temperature and long day, and 4. low temperature and short day. The same materials were grown also in field condition. Parents, F$_1$ and F$_2$ generation were grown also in both greenhouse under high temperature and short day and in field. The results obtained were summarized as follow: 1. No effects of temperature and daylength on the number of leaves on the main stem were found when -varieties were vernalized. The number of main stem leaves were fewer for spring type of varieties than for winter type of varieties. 2. The effects of temperature and daylength on the days to flag leaf opening were dependent on the speed of leaf emergence. The speed of leaf emergence were faster for lower leaves than for upper leaves. 3. The response to short day and long day (earliness of narrow sense) of varieties were found to be direct factor responsible to physiology of heading dates in vernalized varieties. Great difference of varieties to heading date was found in high temperature and short day treatment, but less differences were found in high temperature and long day, low temperature and long day and low temperature and short day treatments respectively. The least varietal difference for heading dates was found in the field condition. 4. Changkwang and Parker were found to be the most sensitive to short day treatment (photosensitive) and the heading of these varieties were delayed by short day treatment. No great varietal differences were found among other varieties. 5. Varietal differences of heading dates due to daylength were greater in high temperature than in low temperature. 6. Varietal differences of heading dates due to temperature were not great. but in general the heading dates of varieties were faster under high temperature than under low temperature. 7. Earliness of heading dates was due to partial dominance effect of genes involved in any condition. The degree of dominance was greater under short day than under long day treatment. 8. The varietal differences of heading date under high temperature and long day were due to earliness or narrow sense (response to long day) of varieties. The degree of dominance was greater for Yecora F70, spring type than for other winter type of varieties. No differences or less differences of degree of dominance was found among winter type of varieties. The estimated number of effective factor concerned in the earliness of narrow sense was one pair of allele with minor genes. 9. The insensitivity of varieties to short day treatment in heading dates was due to single dominant gene effect. Under the low temperature the sensitivity of varieties to short day treatment was less apparent. 10. The earliness of short day and long day (earliness of narrow sense) sensitivities of varieties appearea to be due to partial dominance of earliness over lateness. In strict sense, the degree of the dominance should be distinguished. 11. Dominant gene effects were found for the thermo-sensitivity of varieties, and the effect was less, significant than the earliness in narrow sense. 12. One pair of allele, ee and EE, for photosensitivity was responsible for the difference in the heading dates between Changkwang and Suke #169. Two pairs of alleles, ee, enen and EE, EnEn. appeared to be responsible for the difference between Changkwang and Yecora F70. The effects of EE and EnEn were, additive to the earliness and the effects of EE were greater than EnEn under short day. However, the effects of EE were not evident in long day but the effects of EnEn were observed in long day. 13. Two pairs of dominant alleles for the earliness were estimated from the analysis of F$_1$ diallels in the field but the effects of these alleles in F$_2$ were not apparent due to low temperature and short day treatment in early part of growth and high temperature and long day treatment in later part of growth. The F$_2$ population shows continuous variation due to environmental effects and due to other minor gene effects. 14. The heritabilities for heading dates were ranged from 0.51 to 0.72, indicating that the selection in early generation might be effective. The extent of heritability for heading dates varied with environments; higher magnitude of heritability was obtained in short day treatment and high temperature compared with long day and low temperature treatments. The heritabilities of heading date due to response to short day were 0.86 in high temperature and 0.76 in low temperature. The heritabilities of heading date due to temperature were not significantly high. 15. The correlation coefficients of heading dates to the number of grains per spike, weight of 1, 000 grains. and grain yield were positive and high, indicating the difficulties of selections of high yielding lines from early population. But no significant correlation coefficient was obtained between the earliness and the number of spikes, indicating the effective selection for high tillering from early varieties for high yielding.

• Korean Journal of Plant Resources
• /
• v.25 no.3
• /
• pp.323-328
• /
• 2012

This paper describes the potential use of deep sea water to stimulate seed germination in both common and Tartary buckwheat. Treatment of 10% deep sea water at $25^{\circ}C$ would slightly enhance germination of buckwheat seeds compared to non-DSW treatment and other temperature. In this study, the significant effects of photoperiod and temperature on seedling growth were also found in the HL treatment for the number of leaf, plant height, and plant fresh weight and LL treatment for root length and leaf size. Common buckwheat (Suwon No.1) showed higher rate (93%) of flowering plants in the HS and LL (93% of flowering rates) than those revealed in the HS and LS treatment, while the low percentage(67%) of plant flowering plants was shown in the LS treatment. All plants (100%) of a Korean landrace, Ahndong-jaerae showed flowers in the HS and LS treatment. HL and LL treatment status did not occur in the plant's flowering. Any Tartary buckwheat (KW45) plant did not yet flowered when it was 21 days-old.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.59-65
• /
• 1996

Cotton fabrics were treated by low temperature plasma and/or cellulase, and its physical and dyeing properties were investigated. All the pretreatments of the cotton with low temperature plasma of oxygen, nitrogen and argon slowed down the rate of weight loss of cotton in cellulase solution. Plasma pretreatment did not show any strength retention effect on cotton fiber in the subsequent cellulase treatment. Pretreatment of cotton with low temperature oxygen plasma decreased the rate of dyeing in direct dye bath, while cellulase or plasma/cellulase pretreatment increased the rate. Equilibrium dye uptake of cotton was not changed greatly by the pretreatments except the normal untreated cotton showed more or less high uptake. The pretreatment of cellulase with a water-soluble carbodiimide reduced the enzymatic activity, and did not show any strength retention of cotton in enzymatic weight loss.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.234-242
• /
• 2008

To identify low temperature-induced genes of wheat chromosome substitution line 5D, suppression subtractive hybridization (SSH) was performed with mRNAs from leaf samples that treated with low temperature ($4^{\circ}C$). A cDNA library was constructed using mRNA isolated from wheat chromosome substitution line 5D leaves treated with low temperature ($4^{\circ}C$). The nucleotide and deduced amino acid sequences of the putative gene products were compared. wfr-9 and wfr-32 showed identity over 90% related to vernalization gene. Other two genes, wfr-77 and wfr-83 which is related to freezing-resistant gene have also identity over 90%. This result suggest that those genes may be transcribed into antifreeze proteins which are accumulated within leaf apoplasts, when wheat chromosome substitution line 5D is acclimated during low temperature treatment.

• Journal of the Korean Ceramic Society
• /
• v.30 no.7
• /
• pp.557-562
• /
• 1993

Following conclusions are made from the detalied research on the relation between the phase change of the petroleum raw cokes after ball milling and the preheat treatment temperature. The petroleum raw cokes species are preheated in the temperature range of 350~45$0^{\circ}C$. At the preheat treatment temperature of 40$0^{\circ}C$ the particles of petroleum raw cokes from ball milling become spheically shape with the almost uniform particle size distribution of 1~5${\mu}{\textrm}{m}$. At the same temperature, they became low-graphitized with the d0.02 X-ray diffraction index of 3.41$\AA$. The carbon material made from the petroleum raw cokes at 40$0^{\circ}C$ turned out to have the good modulus of rupture about 600kg/$\textrm{cm}^2$, with the bulk density around 1.8g/㎤ and the appearent porosity around 8%.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1045-1052
• /
• 1997

Barium ferrites (BaFe12O19) were synthesized at the various temperature by the coprecipitation-oxidation method. X-ray diffraction Rietveld analysis for barium ferrites were performed, their microstructures were observed and their magnetic properties were measured, in order to analyze the crystal structures and determine the optimal temperature of heat-treatment. The barium ferrite, its average particle size 80 nm, was formed at 600℃ through the hematite (α-Fe2O3), but the site occupations of the Fe's in tetrahedral and bipyramidal sites and of the Ba relatively low. Increasing the heating temperature, these occupations and the magnetization increased, and the crystal c-axis decreased. These changes were very small at the heat treatment of above 800℃, but the particles were rapidly grown. It is suggested that the optimal temperature of heat-treatment is 800℃, at which temperature crystal structure is relatively stable and the particles hardly ever grow.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.504-510
• /
• 2003

This study has been carried out to evaluate the passive treatment systems for acid mine drainage in Korea and to suggest, if possible, the method for the improvement. 35 passive treatment systems in 27 mines have been constructed since 1996. SAPS, being the main process, was combined with more than one of processes such as anaerobic wetland, aerobic wetland, and oxidation pond for the construction of passive treatment system. Problems observed during the operation include the poor sulfate removal ratio, overflow, leakage, unusabless of the whole system, and inefficiency. The reasons of the poor sulfate removal ratio are believed that the low temperature during the winter prohibits the SRB activity and HRT for bacterial sulfate reduction is insufficient. An alternative method In Adit Sulfate Reducing System which enables to keep the temperature constant at about $15^{\circ}C$ was suggested. IASRS is the methods of placing the SAPS inside the adit, which enables the temperature around the system constant can be maintained. The experiments using the laboratory scaled model systems made up of four sections showed high efficiencies in pH control and metal removal ratios, but showed still low sulfate removal ratio of about $23\%$ also with high COD at the beginning of the operation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.39-44
• /
• 2014

Silicon nitride thin film deposited with Plasma Enhanced Chemical Vapor Deposition was treated by a nitrogen plasma generated by Inductively Coupled Plasma at room temperature. The treatment was investigated by Fourier Transform Infrared Spectroscopy and Atomic Force Microscopy on the surface at various RF source powers at two RF bias powers. The amount of hydrogen was reduced and the surface roughness of the films was decreased remarkably after the plasma treatment. In order to understand the causes, we analyzed the plasma diagnostics by Optical Emission Spectroscopy and Double Langmuir Probe. Based on these analysis results, we show that the nitrogen plasma treatment was effective in the improving of the properties silicon nitride thin film for flexible display.