• 한국전자통신학회논문지
• /
• 제10권2호
• /
• pp.311-318
• /
• 2015

우리나라 연안에서 매년 발생하는 적조는 환경적, 경제적인 피해의 발생으로 국가적인 문제로 대두되고 있다. 본 연구에서는 10년간의 해양 기상자료를 수집하여 적조발생에 우호적인 조건을 분석하고 각 해양 기상 요소를 이용하여 2012년부터 2014년까지의 해양 기상상황에 적용하여 적조발생예측을 시도하였다. 그 결과 2012년과 2013년은 실제 적조발생 6~11일 전에 적조의 발생가능경보를 할 수 있었다. 그러나 2014년은 평년에 비해 많은 강수(장마), 낮은 일조시수, 저수온 해역 발생 등의 이유로 적조예측의 정확도가 떨어지는 결과를 얻었다. 따라서 적조발생에 일조량이 미치는 영향을 더욱 고려할 필요가 있으며 추가적인 기상 및 해양요소들의 복합적인 분석이 더욱 필요할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.505-508
• /
• 2006

Self-leveling mortar is walkable bottom mortar which can maintain the horizontality of self fluid and have the the quick-setting quality, the low-human-effort practicable material of high-quality bottom in construction. In accordance with more adhesive strength with bottom side and absorption control, Primer is used for purpose to prevent pin-hole occurrence by self leveling mortar application prior to construction. This study is composed measurement of absorption, adhesive strength. Used material is NP-40 as nonionic emulsifying agent, uses SA-210L as negative ion emulsifying agent, uses APS, SBS as ridical initiator. A result of test, in accordance with image of Primer, as low temperature and application frequency, indicates low absorption rate and adhesive strength, as solid powder and dryness time is increse, absorption rate and adhesive strength lowly shows figure.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.83-90
• /
• 2018

This study was conducted to investigate the living environment of semi-basement housing units in multi-household houses. It analyzed measurements of temperature and humidity obtained from the housing units. For this study, temperature and humidity sensors were installed in 10 semi-basement housing units to measure interior temperature and humidity for 13 months. A survey was conducted to get information about the occurrence of dew condensation and mildew and to investigate residents' satisfaction level with the residential environment. According to the result, all the housing units under study had dew condensation and mildew. The average summer temperature of the 10 housing units was $27.84^{\circ}C$, and average humidity was 64.91%RH, while the average winter temperature was $20.6^{\circ}C$, and the average humidity was 40.12%RH. Depending on the condition of each housing unit, deviation was big. Residents' average level of satisfaction with the living condition was 2.03 which shows a low satisfaction (on a scale of 1-5 with 5 being completely satisfied.).

• 대한지리학회지
• /
• 제47권2호
• /
• pp.208-225
• /
• 2012

이 연구에서는 한국의 미래 기온극값의 변화를 전망하고자 하였다. 이를 위해 12.5km 고해상도의 지역기후모델(HadGEM3-RA)에서 생산된 일 최고 및 최저 기온 자료와 관측 자료를 이용하여 RCP4.5/8.5 시나리오에 따른 6개 극한기온 지수를 산출하고, 현재(1971-2000) 대비 21세기 말(2070-2099)의 공간 변화를 분석하였다. 현재 기간에 대해 모델에서 생산된 일 최고 및 최저 기온은 관측 자료의 확률분포 형태와 범위를 비교적 잘 모의한다. 현재 대비 21세기 말에 결빙일(ID)과 서리일(FD)은 전 지역에서 감소하고 여름일(SD)과 열대야(TR)는 증가할 것이며, 95퍼센타일을 초과하는 일 최고기온(TX95)과 5퍼센타일 미만 일 최저기온(TN5)의 평균값은 전 지역에서 상승할 것으로 전망된다. 이는 RCP4.5보다 RCP8.5 시나리오의 경우에 더 강하다. 고도는 ID, SD, TR, TX95, TN5와 위도는 ID, TR, TN5의 변화와 유의한 상관관계를 보인다. 21세기 말에 산지에서는 기온의 하위 극값 상승, 남해안에서는 열대야 증가로 인한 영향이 강하게 나타날 것으로 전망된다.

• Journal of the Korean Data and Information Science Society
• /
• 제27권6호
• /
• pp.1593-1600
• /
• 2016

환경시험의 목적은 시험대상 제품이 수명주기 중 겪을 수 있는 환경에 노출되었을 때 정상적인 기능을 수행할 수 있는지 설계 제조되었는지를 시험 평가하는 것이다. 본 논문은 한반도 내륙에서 운용할 군수장비의 운용환경조건에 대한 온도시험의 설계 기준을 제안한다. 온도기준은 과도하거나 과소하지 않게 합리적으로 설계되어야하는데 본 연구에서는 한국에서 가장 더웠던 지역과 가장 추웠던 지역을 기준으로 고온 및 저온에 대한 다양한 백분위별 발생빈도를 제시한다. 1904년부터 2014년까지 132개 관측지점의 기온 자료를 분석한 결과 1개월 기준으로 가장 더운 지역은 대구, 가장 추운 지역은 양평으로 확인되었다. 한반도 내륙의 운용 환경에서 고온과 저온의 1% 발생빈도값은 각각 $38.7^{\circ}C$와 -$29.0^{\circ}C$로 추정되었다. 아울러 상대습도, 풍속, 태양복사를 포함하는 고온과 저온의 일주기표도 제시한다.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.877-880
• /
• 2009

A curing process in post-printing section of R2R process is required for an electrical property of the printed pattern when devices such as RFID, Solar cell are printed. PEN as well as heat-stabilized PET which is used as a plastic substrate would be deformed at high temperature due to change of its elastic modulus. And crack in the printed pattern, which is on the plastic substrate is occurred due to the deformation of the substrate. The occurrence of crack causes electrical resistance to increase and the quality of the device to deteriorate. In case of RFID antenna, the range of reading distance is shortened as the electrical resistance of the antenna is increased. Therefore, the deformation of the plastic substrate, which causes the occurrence of crack, should be minimized by setting up low operating tension in R2R process. In low tension, slippage between a moving substrate and a roller would be generated when the operating speed is increased. And scratch would be occurred when slippage is generated due to an air entrainment, which is related to the thickness of the air film. The thickness of the air film is increased when operating speed is increased as shown by simulation based on mathematical model. The occurrence of scratch in conductive pattern printed by roll to roll process is a critical damage because it causes degradation or failure of electrical property of it.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.934-939
• /
• 2014

The daily recording of basal body temperature is the most useful method of determining the term of ovulation by resolving the rise in temperature. To support this aim, Graphical User Interface (GUI) system is designed and implemented to visualize the basal body temperature variations on daily basis by using android platform smartphone with programming multi-thread Java modules. To estimate the occurrence of ovulation cycle, a new method of analyzing the low-frequency features including a DC level and the second largest peak in frequency spectrum domain is proposed with interpreting the prominent features into the average basal-body temperature variations and a menstrual cycle.

• Architectural research
• /
• 제10권1호
• /
• pp.33-39
• /
• 2008

Condensation has mainly occurred in corridor type apartment door which is exposed to the outside air and is made of steel, which has high thermal conductivity. As a result, the total costs of repair have increased with the number of disputes with residents. In this study, therefore, we investigate materials and construction methods used in apartment door, perform a computer simulation to find out possible improvements, and then suggest the dew point to prevent the occurrence of condensation throughout simulation. The results indicate that the temperature that condensation does not occur is $15.4^{\circ}C$, and the optimum method of achieving this dew point is shown to be a door frame system including a large vertical slot to decrease the area of thermal conduction between the outer and inner portions of the door frame. Mock-up tests show that the surface temperature of the door frame was higher than the dew point, and the system can withstand severe cold conditions of $-20^{\circ}C$. In application test, the surface temperature of door frame with vertical slots is $5.9^{\circ}C$in average, which is higher than the existing door frame. Furthermore, in the temperature distribution of the surrounding door measured with infrared ray camera, the existing door shows the high temperature distribution indicating lack of insulation, but the improved door shows the low temperature distribution indicating higher insulation.

• 대기
• /
• 제16권3호
• /
• pp.187-201
• /
• 2006

During summer (JJA) of 2004, a record-high temperature in Korea appeared at Miryang ($38.5^{\circ}C$ on July 30). Moreover, Miryang showed the most frequent occurrence (25 days in JJA) of the daily highest temperature among observational sites in Korea. Based on meteorological analysis, it is found that this phenomenon is caused by neither the global warming effect nor the urban climate effect. It is caused by the mesoscale and synoptic and/or global scale atmospheric circulations, as evidenced by several factors described below. Firstly, the hottest areas have normally occurred not at a point but over an area, particularly along an axis connecting Sancheong and Daegu. But in 2004, this axis has moved southward and locates over Namhae-Miryang due to northerlies that were induced by the heating effect related to the low snow-cover on the Tibet Plateau. Secondly, although the maximum temperature was the highest among observational sites in Korea, the daily mean temperature and the number of nights with air temperature over $25^{\circ}C$ were not the highest at Miryang. Thirdly, the downdraft induced by the second circulation of typhoon and abnormal development of the North-Pacific High were found to have exerted an important role.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.567-573
• /
• 2015

본 논문은 저온과 고온 환경 하에서 카본/에폭시 복합재의 기계적 물성 변화를 평가하는데 목적을 두고 있다. 기계적 물성 변화 평가는 환경 챔버와 전기로를 이용하여 $-40^{\circ}C$에서 $220^{\circ}C$까지의 온도에 대해 섬유방향과 섬유 직각방향의 인장 물성, 면내 전단 물성 그리고 층간전단강도에 대해 평가를 수행하였다. $-40^{\circ}C$ 저온환경에서의 기계적 물성은 상온에서의 물성보다 증가하는 것을 확인하였다. 섬유방향 물성은 온도가 증가함에 따라 물성저하가 서서히 발생하였으나, 섬유직각방향 물성, 면내전단 물성 그리고 층간전단강도는 $140^{\circ}C$ 이상의 온도에서 수지의 유리전이로 인해 급격한 물성저하가 발생하는 것을 확인하였다. $100^{\circ}C$ 환경에서 섬유 직각방향 인장물성 증가의 직접적인 원인은 수지의 후경화로 인한 현상으로 판단된다.