• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.27-36
• /
• 2014

This paper presents an adaptive wide-area damping controller (WADC) based on generalized predictive control (GPC) and model identification for damping the inter-area low frequency oscillations in large-scale inter-connected power system. A recursive least-squares algorithm (RLSA) with a varying forgetting factor is applied to identify online the reduced-order linearlized model which contains dominant inter-area low frequency oscillations. Based on this linearlized model, the generalized predictive control scheme considering control output constraints is employed to obtain the optimal control signal in each sampling interval. Case studies are undertaken on a two-area four-machine power system and the New England 10-machine 39-bus power system, respectively. Simulation results show that the proposed adaptive WADC not only can damp the inter-area oscillations effectively under a wide range of operation conditions and different disturbances, but also has better robustness against to the time delay existing in the remote signals. The comparison studies with the conventional lead-lag WADC are also provided.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.13-17
• /
• 2023

Magnetic separation technology for small paramagnetic particles has been desired for the volume reduction of contaminated soil from the Fukushima nuclear power plant accident and for the separation of scale and crud from nuclear power plants. However, the magnetic separation for paramagnetic particles requires a superconducting high gradient magnetic separation system applied, hence expanding the bore diameter of the magnets is necessary for mass processing and the initial and running costs would be enormous. The use of high magnetic fields makes safe onsite operation difficult, and there is an industrial need to increase the magnetic separation efficiency for paramagnetic particles in as low a magnetic field as possible. Therefore, we have been developing a magnetic separation system combined with a selection tube, which can separate small paramagnetic particles in a low magnetic field. In the previous technique we developed, a certain range of particle size was classified, and the classified particles were captured by magnetic separation. In this new approach, the fluid control method has been improved in order to the selectively classify particles of various diameters by using a multi-stage selection tube. The soil classification using a multi-stage selection tube was studied by calculation and experiment, and good results were obtained. In this paper, we report the effectiveness of the multi-stage selection tube was examined.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.509-512
• /
• 2006

In this paper, we proposed the novel device and process design to enhance the uniformity of low-temperature poly-Si TFTs fabricated by sequential lateral solidification (SLS). The proposed design schemes can avert the conventional two-shot SLS process-induced issues. Moreover, different design considerations between conventional excimer laser crystallization and the SLS process were also proposed and discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.79-82
• /
• 2003

This paper describes a new low-swing inverter for low power consumption. To reduce a power consumption, an output voltage swing is in the range from 0 to $V_{ref}-V_{TH}$, where $V_{ref}=V_{DD}-nV_{TH}$. This can be done by the inverter structure that allow a full swing or a swing on its input terminal without leakage current. Using this low-swing voltage technology, we propose a low-power $4\times4$ bit parallel multiplier. The proposed circuits are simulated with HSPICE under $0.35{\mu}m$ CMOS standard technology. Compare to the previous works, this circuit can reduce the power consumption rate of 11.2% and the power-delay product of 10.3%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1285-1290
• /
• 2018

Objective: This study shows the effects of dietary fiber levels on cecal microbiota composition in geese at day 70 according to pyrosequencing of the 16S ribosomal RNA gene. Methods: A total of 468 1-day-old healthy male Yangzhou goslings with similar body weight were randomly divided into 3 groups with 6 replicates per group and 26 geese per replicate. Geese were fed diets with fiber levels of 2.5% (low fiber level diet, Group I) and 6.1% (Group III) during days 1-70, respectively, or 4.3% for days 1-28 and 6.1% for days 29-70 (Group II). Results: Low fiber level diet decreased body weight, average daily gain during, increased lower feed conversation rate of geese during day 1 to 70 (p<0.05). Low fiber level diet decreased the total operational taxonomic units, Chao1 index and Shannon index, whereas increased the Simpson index of cecal microbiota in geese at day 70. Low fiber level diet decreased the relative abundance of Bacteroidetes, Firmicutes, Bacteroides, and Paraprevotella in cecum of geese at day 70. The similarity of cecal microbiota between low fiber level diet group and other groups was smaller. Conclusion: This study indicates that the low fiber level diet decreased diversity of microbiota, and relative abundance of some beneficial microbiota in cecum of geese at day 70, implying that the low fiber level diet has negative influence on performance by altering the diversity and population of cecal microbiota in geese.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.225-232
• /
• 2008

To understand the effect of the cyclic strain rate on the environmentally assisted cracking behaviors of SA508 Gr.1a low alloy steel in deoxygenated water at $310^{\circ}C$, the fatigue surface and a sectioned area of specimens were observed after low cycle fatigue tests. On the fatigue surface of the specimen tested at a strain rate of 0.008 %/s, unclear ductile striations and a blunt crack tip were observed. Therefore, metal dissolution could be the main cracking mechanism of the material at this strain rate. On the other hand, on the fatigue surfaces of the specimens tested at strain rates of 0.04 and 0.4 %/s, brittle cracks and flat facets, which are evidences of the hydrogen induced cracking, were observed. In addition, a tendency of linkage between the main crack and the micro-cracks was observed on the sectioned area. Therefore, at higher strain rates, the main cracking mechanism could be hydrogen induced cracking. Additionally, evidence of the dissolved MnS inclusions was observed on the fatigue surface from energy dispersive x-ray spectrometer analyses. Thus, despite the low sulfur content of the test material, the sulfides seem to contribute to environmentally assisted cracking of SA508 Gr.1a low alloy steel in deoxygenated water at $310^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.274-277
• /
• 2006

Nanostructured carbon (nm-C), including carbon nanotubes and nanofibers (CNTs/CNFs) is promising for low-cost field emission display (FED) application. By modification of CNTs/CNFs, uniform CNTs/CNFs can be obtained and used for field emission cathode (FEC) on glass substrate. By screen-printing (SP) and electrophoretic deposition (EPD) process, large area FEC can be obtained. The FED properties are studied and compared. Both SP and EPD FEC show excellent field emission properties, such as low emission field and uniform emission, after optimization the fabrication process. While EPD FEC exhibits better luminescence image. By vacuum sealing, the low cost nm-C-FED prototypes based on EPD cathode have been demonstrated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1133-1136
• /
• 2002

We designed and fabricated a low local oscillation (LO) power V-band CPW mixer module using a CPW-to-waveguide transition technology for the application of millimeter-wave wireless communication systems. The mixer was designed using a unique gate mixing architecture to achieve simultaneously a low LO input power, a high conversion gain, and good LO-RF isolation characteristics. The fabricated mixer exhibited a high conversion gain of 2 dB at a low LO power of 0 dBm. For data transmission of the 60 ㎓ wireless LNA systems, we fabricated a CPW-to-waveguide converter module of WR-15 type and mounted the fabricated mixer in the converter module. The fabricated V-band mixer exhibited a higher conversion gain and a lower LO input power than other reported V-band mixers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.150-155
• /
• 2006

Carbon nanotubes backlight unit (CNT-BLU) that lightened by field emission was developed into practicability. According to our novel structure, AC mode circuit design and simple printing process, CNT-BLU could achieve 85% of uniformity, 8000 nits of brightness and low material and fabrication cost. Based on these performances, this new planar backlight technology has chances to proceed to mass production and has the potential to replace traditional backlight technology because of its good properties, like the simple processes, easy to large scale, low surface temperature, low power consumption, optical film-free and Hg-free, etc.

• 인간식물환경학회지
• /
• 제22권6호
• /
• pp.575-582
• /
• 2019

Moss is used as an important material in indoor landscaping as well as outdoor landscaping. Moss is vivid green during growth and excellent in ornamental value. But when temperature drops, moss stops growth, turns brown or loses its ornamental value. In the present experiment, for the purpose of classifying native mosses according to the growth response to low temperature, the temperature of the plant growth chamber was set to 15℃/5℃ (16h/8h, day/night) and 5℃ (24h) for 8 weeks using nine native moss species. Thereafter, the temperature of the plant growth chamber was set to 20℃, and then the changes of moss block area and moss color were measured. The changes of moss block area and moss color were measured using a Photoshop program, after each moss block was photographed. As a result, Atrichum undulatum (Hedw.). Beauv., Etodon luridus (Griff.) A. Jaeger, Bachythecium plumosum (Hedw.) Schimp, Plagiomnium cuspidatum (Hedw.) T.J. Kop, and Hypnum plumaeforme Wilson showed a small decrease in moss block area at low temperature, and their recovery were the fastest at 20℃. These three species had higher green values at low temperature compared to other species, and the greenness increased rapidly at 20℃. On the other hand, Atrichum undulatum (Hedw.). Beauv., Marchantia polymorpha L., and Thuidium cymbifolium (Mitt.) A. Jaeger showed the smallest block area at low temperature and the lowest recovery even at 20℃. Their green values also decreased significantly at low temperature, and maintained low green value even at 20℃. These results showed that these three moss species are sensitive to low temperature. The remaining Myuroclada maximowiczii, Plagiomnium cuspidatum, and H. erectiusculum showed moderate responses to low temperature compared to other six species of mosses.