• The Korean Journal of Ecology
• /
• v.19 no.2
• /
• pp.165-178
• /
• 1996

We investigated the role of competition in adaptation to varying water availability levels for two ecotypically-differentiated populations of Impatiens pallida found naturally in low- vs. high-water environments. In a greenhouse experiment, seedlings were grown in pure cultures at two densities (n=1 and 2 plants per pot) and in mixed cultures (n=2) under low-, medium- and high-water treatments. The two populations were shown to be genetically distinct across the range of environmental conditions in the greenhouse experiment, confirming previous findings. The two populations had similar morphological responses to density and water availability in pure cultures and mixtures, but the population from the high-water environment showed a greater growth response to high water availability than did the population from the low-water environment and the difference in growth between the two populations decreased from the high-water to low-water treatment. Relative competitive ability of two populations were compared under three different water treatments and two densities. Differential response to watering treatment and density were not reflected in a difference in relative competitive ability. Relative yield totals were significantly greater than 1 overall. The niche differentiation suggested by RYTs>1 may be responsible for the lack of differential competitive effects observed for populations in the three vatering treatments.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1080-1088
• /
• 2014

By combining a wind turbine with an energy storage system (ESS), we are able to attenuate the intermittent wind power characteristic making the power derived from a wind farm dispatchable. This paper evaluates the influence of the phase delay of the low-pass filter in the conventional smoothing power control on the ESS capacity; longer phase delays require a larger ESS capacity. In order to eliminate the effect of the phase delay, we optimize the power dispatch using a zero-phase low-pass filter that results in a non-delayed response in the power dispatch. The proposed power dispatching method significantly minimizes the ESS capacity. In addition, the zero-phase low-pass filter, which is a symmetrical forward-reverse finite impulse response type, is designed simply with a small number of coefficients. Therefore, the proposed dispatching method is not only optimal, but can also be feasibly applied to real wind farms. The efficacy of the proposed dispatching method is verified by integrating a 3 MW wind turbine into the grid using wind data measured on Jeju Island.

• Journal of muscle and joint health
• /
• v.16 no.1
• /
• pp.36-45
• /
• 2009

Purpose: This study was to determine the effects of laughter therapy on stress response and pain of military patients with low back pain. Method: The subjects in the experimental group received 3-sessions of laughter therapy on 3 consecutive days. The primary outcome measures were state anxiety, depression, blood pressure, pulse rate and pain. Result: After 3 sessions of laughter therapy, the scores of state anxiety(p=.046), depression(p=.028) and pulse rate(p=.003) were significantly lower and diastolic blood pressure(p=.038) was significantly higher in the experimental group than those in the control group. The level of pain(p=.711) was not different significantly between two groups. Conclusion: Laughter therapy could be an effective strategic intervention for military patients with low back pain to reduce the level of anxiety and depression. Further studies are needed to determine long-term effects of laughter therapy and its effects on cardiovascular system and pain.

• Steel and Composite Structures
• /
• v.47 no.3
• /
• pp.395-403
• /
• 2023

The main objective of this article is to investigate the response of different fiber metal laminates subjected to low velocity impact experimentally and numerically via finite element method (FEM). Hence, two different fiber metal laminate (FML) samples (GLARE/CARALL) are made of 7075-T6 aluminum sheets and polymeric composites reinforced by E-glass/carbon fibers. In order to study the responses to the low velocity impacts, samples are tested by drop weight machine. The projectiles are released from 1- and 1.5-meters height were the speed reaches to 4.42 and5.42 meter per second and the impact energies are measured as 6.7 and 10 Joules. In addition to experimental study, finite element simulation is done and results are compared. Finally, a detailed study on the maximum deflection, delamination and damages in laminates and geometry's effect of projectiles on the laminate response is done. Results show that maximum deflection caused by spherical projectile for GLARE samples is more apparent in comparison with the CARALL samples. Moreover, the maximum deflection of GLARE samples subjected to spherical projectile with 6.7 Joules impact energy, 127% increases in comparison with the CARALL samples in spite of different total thickness.

• Earthquakes and Structures
• /
• v.24 no.6
• /
• pp.415-428
• /
• 2023

Low-cost techniques with seismic isolation performance and excellent resilience need to be explored in the case of rural low-rise buildings because of the limited buying power of rural residents. As an inexpensive and eco-friendly isolation bearing, scrap tire pads (STPs) have the issue of poor resilience. Thus, a seismic isolation system under a column (SISC) integrated with STP needs to be designed for the seismic protection of low-rise rural buildings. The SISC, which is based on a simple exterior design, maintains excellent seismic performance, while the mechanical behavior of the internal STP provides elastic resilience. The horizontal behaviors of the SISC are studied through load tests, and its mechanical properties and the intrinsic mechanism of the reset ability are discussed. Results indicate that the average residual displacement ratio was 24.59%, and the reset capability was enhanced. Comparative experimental and finite element analysis results also show that the load-displacement relationship of the SISC was essentially consistent. The dynamic characteristics of isolated and fixed-base buildings were compared by numerical assessment of the response control effects, and the SISC was found to have great seismic isolation performance. SISC can be used as a low-cost base isolation device for rural buildings in developing countries.

• Earthquakes and Structures
• /
• v.5 no.6
• /
• pp.657-678
• /
• 2013

For economical earthquake resistant design of cable-stayed bridge tower, the use of energy dissipation systems for the earthquake protection of steel structures represents an alternative seismic design method where the tower structure could be constructed to dissipate a large amount of earthquake input energy through inelastic deformations in certain positions, which could be easily retrofitted after damage. The design of energy dissipation systems for bridges could be achieved as the result of two conflicting requirements: no damage under serviceability limit state load condition and maximum dissipation under ultimate limit state load condition. A new concept for cable-stayed bridge tower seismic design that incorporates sacrificial link scheme of low yield point steel horizontal beam is introduced to enable the tower frame structure to remain elastic under large seismic excitation. A nonlinear dynamic analysis for the tower model with the proposed energy dissipation systems is carried out and compared to the response obtained for the tower with its original configuration. The improvement in seismic performance of the tower with supplemental passive energy dissipation system has been measured in terms of the reduction achieved in different response quantities. Obtained results show that the proposed energy dissipation system of low yield point steel seismic link could strongly enhance the seismic performance of the tower structure where the tower and the overall bridge demands are significantly reduced. Low yield point steel seismic link effectively reduces the damage of main structural members under earthquake loading as seismic link yield level decreases due their exceptional behavior as well as its ability to undergo early plastic deformations achieving the concentration of inelastic deformation at tower horizontal beam.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.1.1-1.13
• /
• 2016

Objectives To investigate the accuracy and scientific validity of the current very low risk factor for hereditary diseases in humans following exposures to ionizing radiation adopted by the United Nations Scientific Committee on the Effects of Atomic Radiation and the International Commission on Radiological Protection. The value is based on experiments on mice due to reportedly absent effects in the Japanese atomic bomb (A-bomb) survivors. Methods To review the published evidence for heritable effects after ionising radiation exposures particularly, but not restricted to, populations exposed to contamination from the Chernobyl accident and from atmospheric nuclear test fallout. To make a compilation of findings about early deaths, congenital malformations, Down's syndrome, cancer and other genetic effects observed in humans after the exposure of the parents. To also examine more closely the evidence from the Japanese A-bomb epidemiology and discuss its scientific validity. Results Nearly all types of hereditary defects were found at doses as low as one to 10 mSv. We discuss the clash between the current risk model and these observations on the basis of biological mechanism and assumptions about linear relationships between dose and effect in neonatal and foetal epidemiology. The evidence supports a dose response relationship which is non-linear and is either biphasic or supralinear (hogs-back) and largely either saturates or falls above 10 mSv. Conclusions We conclude that the current risk model for heritable effects of radiation is unsafe. The dose response relationship is non-linear with the greatest effects at the lowest doses. Using Chernobyl data we derive an excess relative risk for all malformations of 1.0 per 10 mSv cumulative dose. The safety of the Japanese A-bomb epidemiology is argued to be both scientifically and philosophically questionable owing to errors in the choice of control groups, omission of internal exposure effects and assumptions about linear dose response.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.771-791
• /
• 2018

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.177-190
• /
• 2003

Objective : This study was intended to investigate the analgesic effects of electroacupuncture(EA) on mechanical allodynia according to the frequency and intensity of EA. Also to know if mechanical allodynia and the analgesic effects of EA is related to the sympathetci nervous system and/or the purinergic system. Methods : mechanical allodynia-induced rats were produced by resecting S1-S2 nerve. The zusanli(ST36) was used for acupoint and the rats were divided into 4 groups. Each group was given different stimuli[low frequency low intensity-EA(LFLI-EA), low frequency high intensity-EA(LFHI-EA), high frequency low intensity-EA(LFHI-EA), high frequency high intensity-EA(HFHI-EA)]. Futhermore, to make sympathectomy6-OHDA and phentolamine were administered intraperitonially and the concentration of norepinephrine(NE) were measured. As a ATP blocker, suramin was applied for this study. Results : Comparing to control group, each of the 4 groups(LFLI-EA, LFHI-EA, HFLI-EA, HFHI-EA) showed a significant reduction of response frequency of mechanical allodynia. LFHI-EA was more effective than that of LFLI-EA. The LFHI-EA group also had longer lasting effects from the stimulation than the other groups. Sympathectomy didn't show any reduction of response frequency of mechanical allodynia.(Each n=6, n=4). Nor did both sympathectomy and ATP block. The response frequency wasn't reduced by sympathectomy or by sympathectomy and ATP block, but was significantly reduced with LFHI-EA Conclusions : These results suggest that EA has a significant analgesic effect on mechanical allodynia which has no connection with NE and/or ATP.

• Journal of Nutrition and Health
• /
• v.22 no.1
• /
• pp.42-53
• /
• 1989

The research was designed to study the effect of different fat sources and levels on Body lipid metabolizm and immune responses in Sprague-Dawely strain male rats. These effect of different fat sources compared with sesame Oil, Perilla oil and Beet tallow. Fat sources were divided into 3 groups respectively 7%, 15%, 30% fat level on diet weight basis. The experimental period was 54days. 1) The body weight gain was significantly low in NF group. In Sesame oil group and perilla oil group, low fat level groups were higher than medium, high fat level groups. But in Beef tallow group, high fat level groups were higher than low and Medium groups. 2) The weight of liver, kidney and epididymal fat ped tend to increse with increasing body weight. 3) The contents of triglyceride and total lipid in serum were significantly different with dietary fat sources and Perilla oil group was the lowest. 4) The contents of triglyceride and total lipid in liver were significantly different with dietary fat levels and high fat level group was higher than low fat level group. 5) Perilla oil group, compared with Beef tallow group, showed the higher excretion of cholesterol through feces and the higher deposit of cholesterol in liver. Therefore serum cholesterol level of Perilla oil group was lower than that of Beef tallow group. But eventhough Sesame oil is vegetable oil, Sesame oil did not showed an effect like Perllia oil on serum cholesterol level. 6) Weight of thymus decreased with fat levels particularly in vegetale oil. And it had on effect on mitogen response, mitogen response decreased with fat level in vegetable oil. But in Beef tallow, there was no difference in fat level.