• 제목/요약/키워드: Low pass filter (LPF)

검색결과 172건 처리시간 0.024초

GSM/CDMA 대역용 LTCC Diplexer설계 및 제작 (Design and Fabrication of a LTCC Diplexer for GSM/CDMA Applications)

  • 김태완;이영철
    • 한국정보통신학회논문지
    • /
    • 제13권7호
    • /
    • pp.1267-1271
    • /
    • 2009
  • 본 논문에서는 LTCC 다층회로 기술을 이용하여 GSM과 CDMA 대역을 분리 하는 diplexer를 설계 및 제작하여 그 특성을 측정하였다. Diplexer의 집적도를 높이가 위해 3차원 적층형 인덕터와 커패시터를 이용하여 유전율 7이고, 총 6층의 LTCC 기판에 설계되었다. 저역통과 필터에 인덕터와 고역통과 필터에 커패시터를 각각 병렬로 결합하여 두 대역의 주파수 대역의 선택성을 높였다. LTCC표준 공정으로 제작되어진 다이플렉서의 크기는CPW pad를 포함하여 3,450 ${\times}$4,000 ${\times}$694 ${\mu}$m3이다. GSM 대역에서 -1.35 dB 이하의 삽입 손실과 -5.66 dB 이상의 반사 손실, 그리고 CDMA 대역에서는 -1.54 dB 이하의 삽입 손실과 -9.30 dB 이상의 반사 손실의 특성을 나타내었다.

전원사고 시 3상 계통연계 인버터의 전원 전압 고속 검출 방법 (High Speed Grid Voltage Detection Method for 3 Phase Grid-Connected Inverter during Grid Faults)

  • 최형진;송승호;정승기;최주엽;최익
    • 한국태양에너지학회 논문집
    • /
    • 제29권5호
    • /
    • pp.65-72
    • /
    • 2009
  • The new method is proposed to improve high speed detection of grid voltage phase and magnitude during a voltage dip due to a grid faults. Usually, A LPF(Low Pass Filter) is used in the feedback loop of PLL (Phase Locked Loop) system because the measured grid voltage contains harmonic distortions and sensor noises. so, a new design method of the loop gain of the PI -type controller in the PLL system is proposed with the consideration of the dynamics of the LPF. As a result, a better transient response can be obtained with the proposed design method. The LPF frequency and PI controller gain are designed in coordination according to the steady state and dynamic performance requirement. This paper shows the feasibility and the usefulness of the proposed methods through the computer simulation and the lab-scale experiments.

배전용 정지형 보상기의 개선된 직류단 커패시터 전압제어 (Improved dc-link capacitor voltage control of Distribution Static Compensator)

  • 김호열;최종우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 하계학술대회 논문집
    • /
    • pp.466-467
    • /
    • 2010
  • Researches about DSTATCOM are mainly divided two parts, one is the calculation of the load-side average active power and dc-link capacitor average voltage, the other part is the current control. This paper proposes a calculation of dc-link capacitor average voltage using improved method instead of conventional method using LPF (low pass filter). Through the theoretical analysis and simulation under unbalance loads and non-linear load, the proposed method is verified.

  • PDF

슬라이딩 모드 제어기의 채터링 감소 기법 (Technique of Reducing Chattering for Sliding Mode Controller)

  • 김경주;최윤호;박진배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1636-1637
    • /
    • 2007
  • The sliding mode controller(SMC) is very famous controller for nonlinear control. However the SMC has a defect which is chattering problem. In this paper, we introduce the novel method which reduce the chattering problem. And we compare the performance with conventional methods, such as using low pass filter(LPF), boundary layer approach.

  • PDF

A simple method to optimize DC-bus capacitor in 3-phase shunt Active power filter system

  • Phan, Dang-Minh;Lee, Hong-Hee
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2015년도 전력전자학술대회 논문집
    • /
    • pp.367-368
    • /
    • 2015
  • This paper introduces a shunt active power filter with a small DC bus capacitor by adding additional low-pass filter (LPF). The DC link voltage fluctuation is impressively suppressed with a small value in spite of the low value of DC-link capacitor under the steady-state condition. Consequently, the cost and volume of power converter are significantly reduced thanks to the reduced value of DC-bus capacitor. On the other hand, an indirect control strategy is used to maintain grid-side current when non-linear loads are connected to the system. By using proportional-integral (PI) and modified repetitive controller (RC) in dq0 frame, the calculation time is greatly decreased by 6 times compared with the conventional RC, and the number of measurement devices is also minimized. As a result, the acquired total harmonic distortion (THD) is lower than 2% regardless of the load conditions. Simulation results are carried out in order to verify the effectiveness of the proposed control strategy.

  • PDF

고 효율 인덕터를 이용한 우수한 고조파 억압 특성을 갖는 저역 통과 필터 합성 및 설계 (A Synthesis and Design of the LPF with Novel Spurious Suppression Characteristics Using High Efficiency Inductor)

  • 김유선;안재민;표현성;이혜선;임영석
    • 대한전자공학회논문지TC
    • /
    • 제46권9호
    • /
    • pp.46-51
    • /
    • 2009
  • 본 논문에서는 고 효율 인덕터 특성이 저역 통과 필터의 고조파 성분 억제에 미치는 정량적인 영향에 관한 새로운 접근 방안을 제안한다. 적용될 고 효율 인덕터의 정확한 소자 값들을 추출하기 위해 신뢰성 있는 De-embedding 과정을 적용 하였다. 게다가, 이들의 효과적인 적용 및 비교를 위해, 같은 스펙을 갖는 다양한 계단 임피던스 저역 통과 필터들을 각각 설계하였다. 제안된 과정은 전체 필터 성능을 제어하고 정해진 스펙으로부터 합성되는 등가 회로를 구성하기 위해 효과적으로 응용될 것이라 기대된다.

무정전 전원(UPS)설계를 위한 PWN 인버터에 관한 연구 (A Study on the PWN Inverter for the Design of UPS)

  • 이성백;구용회;이종규
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제2권2호
    • /
    • pp.59-63
    • /
    • 1988
  • 고정 AC 전력전원에서 PWN(Pulse Width Modulation) 기법은 전압과 기본파 주파수를 가변 시키는 데 이용되어 왔다. 종래의 PWN 기법은 전류수, 필터크기 등의 문제점 때문에 PWN 출력 전압파형을 모터 구동 등의 제어 대상에 응용하는 연구가 진행되었다. 그러나 본 논문에서는 출력단 고속 스윗칭 소자를 사용하여 캐리어 주파수를 10(KHz)-45(KHz)까지 정현 PWN 시키고, 인버터의 출력단 파형은 소용량LPF(Low Pass Filter)를 사용하여 PAM(Pulse Amplitude Modulation)을 얻어냈다. 정현 PWN 제어 회로는 속응성과 제어성을 고려하여 마이크로 프로세서와 아날로그 회로로 혼합구성 하였다. 그리고 실험 결과는 변조도 0.6-1.0까지 변할 때 전압 파형을 관찰했다.

  • PDF

A Fully Differential RC Calibrator for Accurate Cut-off Frequency of a Programmable Channel Selection Filter

  • Nam, Ilku;Choi, Chihoon;Lee, Ockgoo;Moon, Hyunwon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권5호
    • /
    • pp.682-686
    • /
    • 2016
  • A fully differential RC calibrator for accurate cut-off frequency of a programmable channel selection filter is proposed. The proposed RC calibrator consists of an RC timer, clock generator, synchronous counter, digital comparator, and control block. To verify the proposed RC calibrator, a six-order Chebyshev programmable low-pass filter with adjustable 3 dB cut-off frequency, which is controlled by the proposed RC calibrator, was implemented in a $0.18-{\mu}m$ CMOS technology. The channel selection filter with the proposed RC calibrator draws 1.8 mA from a 1.8 V supply voltage and the measured 3 dB cut-off frequencies of the channel selection LPF is controlled accurately by the RC calibrator.

New Permanent Magnet Synchronous Motor Current Sensing Phase Delay Compensation Method

  • Park, Sei-Hun;Kim, Il-Hwan
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권1호
    • /
    • pp.241-246
    • /
    • 2016
  • This paper presents a method that can improve the performance of permanent magnet synchronous motor current control by minimizing the measured current phase delay caused by the Low Pass Filter(LPF) used to cut off the noises that flowed in when feedback currents are measured. Although existing methods that change the Cutoff Frequency of the LPF can minimize phase delays during high speed rotations, their noise cutoff effects are much lower and this may lead to the decline of control performance. Therefore, in this study, an algorithm that can compensate current phase delays through relatively simple calculations from the synchronous motor d-q axis coordinate transformation matrix and the inverse transformation matrix is proposed and the validity of the proposed method is verified by comparing the waveform of the calculated current with the waveform of actual currents through simulations and experiments.

실시간 구형파-평균치 변환 방법 (A converting method for square wave to average value in real time)

  • 이종무;김춘경;김석주;천종민;박민국;권순만
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.585-587
    • /
    • 2006
  • Generally, LPF(low pass filter) circuits are used for converting square wave to average value, but these are not used necessary for average value of square wave in real time because of time constant of LPF. This paper deals with acquiring method for average value of square wave in real tine in case of frequency of output voltage is fixed, waveform of output voltage is square wave and duty of output voltage is varied like as 1 quadrant or 4 quadrant chopper.

  • PDF