• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1889-1893
• /
• 2000

During the test drive of developing vehicle, a low frequency vibration of sprung mass on front outer wheel has been frequently observed in cornering with some speed. The purpose of this paper is to investigate the low frequency vibration of the sprung mass. The analysis result shows that the low frequency vibration is caused by sudden migration of the center of gravity of vihicle and it is determined by geometric points of suspension.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.465-468
• /
• 2004

In this paper, we describe the design and implementation of the new current-current negative feedback (CCNF) voltage-controlled oscillator (VCO), which suppresses 1/f induced low-frequency noise. By means of the CCNF, the high-frequency noise as well as the low-frequency noise is prevented from being converted into phase noise. The proposed CCNF VCO shows 11-dB reduction in phase noise at 10 kHz offset, compared with the conventional differential VCO. The phase noise of the proposed VCO is -87 dBc/Hz at 10 kHz offset frequency from 5.5-GHz carrier. The proposed VCO consumes 14.0 mA at 2.0 V supply voltage, and shows single-ended output power of -12.0 dBm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.857-861
• /
• 2004

An active method that improves low frequency characteristics of a reverberation chamber has been proposed. Spatial uniformity of sound pressure at low frequency has been increased by applying active noise control system. The system acts as frequency selective damping materials, which decreases resonance at low frequency and leave high frequency sound field as it is. Linearity of the chamber, which is essential for sound power measurement in the chamber, is guaranteed since fixed control logic has been adopted. Simple application and tests have been done in a small sized rectangular reverberation chamber which has 400Hz cutoff, Loud speakers were used to simulate a noise source and to construct an active noise control system. The spatial distribution of a sound field at 250Hz, 315Hz and 400Hz bands has been measured before and after control. The standard deviation of sound field has been decreased from 3.4dB to 2.5dB. The results show the possibility of active control system as a sound diffuser.

• 센서학회지
• /
• 제31권2호
• /
• pp.120-124
• /
• 2022

With advancements in underwater stealth technology for naval vessels, new sensor configurations for detecting targets have been attracting increased attention. Latest underwater mines adopt multiple sensor configurations that include electric field sensors to detect targets and to help acquire accurate ignition time. An underwater electric field sensor consists of a pair of electrodes, signal processing unit, and preamplifier. For detecting underwater electric fields, the preamplifier requires low-noise amplification at ultra-low frequency bands. In this paper, the specific requirements for low-noise preamplifiers are discussed along with the experimental results of various setups of matched transistors and chopper stabilized operational amplifiers. The results showed that noise characteristics at ultra-low frequency bands were affected significantly by the voltage noise density of the chopper amplifier and the number of matched transistors used for differential amplification. The fabricated preamplifier was operated within normal design parameters, which was verified by testing its gain, phase, and linearity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.623-627
• /
• 2001

Suppression of very low-frequency noise from an automobile exhaust system is difficult due mainly to its large wave length. Therefore, the configuration of total exhaust system, i,e., piping and muffler layout, is important at low frequencies. In this paper, an optimal layout technique of exhaust systems has been developed for reducing low-frequency exhaust noise. For this purpose, system insertion loss and virtual attenuation coefficient have been defined by considering the effects of mean flow and temperature gradient in the pipe. The applicability of present method is investigated with an actual automobile exhaust system and an optimized layout of pipes and mufflers is suggested.

• 신재생에너지
• /
• 제3권3호
• /
• pp.45-53
• /
• 2007

This paper demonstrates a computational method in predicting aerodynamic noise generated from wind turbines. Low frequency noise due to displacement of fluid and leading fluctuation, according to the blade passing motion, is modelled on monopole and dipole sources. They are predicted by Farassat 1A equation. Airfoil self noise and turbulence ingestion noise are modelled upon quadrupole sources and are predicted by semi-empirical formulas composed on the groundwork of Brooks et al. and Lowson. Aerodynamic flow in the vicinity of the blade should be obtained first, while noise source modelling need them as numerical inputs. Vortex Lattice Method(VLM) is used to compute aerodynamic conditions near blade. In the use of program X-foil [M.Drela] boundary layer characteristics are calculated to obtain airfoil self noise. Wind turbine blades are divided into spanwise unit panels, and each panel is considered as an independent source. Retarded time is considered, not only in low frequency noise but also In turbulence ingestion noise and airfoil self noise prediction. Numerical modelling is validated with measurement from NREL [AOC15/50 Turbine) and ETSU [Markham's VS45] wind turbine noise measurements.

• 전기전자학회논문지
• /
• 제3권1호
• /
• pp.39-49
• /
• 1999

This paper describes a 1 GHz, low-phase-noise CMOS fractional-N frequency synthesizer with an integrated LC VCO. The proposed frequency synthesizer, which uses a high-order delta-sigma modulator to suppress the fractional spurious tones at all multiples of the fractional frequency resolution offset, has 64 programmable frequency channels with frequency resolution of $f_ref/64$. The measured phase noise is as low as -110 dBc/Hz at a 200 KHz offset frequency from a carrier frequency of 980 MHz. The reference sideband spurs are -73.5 dBc. The prototype is implemented in a $0.5{\mu}m$ CMOS process with triple metal layers. The active chip area is about $4mm^2$ and the prototype consumes 43 mW, including the VCO buffer power consumption, from a 3.3 V supply voltage.

• 환경영향평가
• /
• 제32권5호
• /
• pp.279-290
• /
• 2023

최근 신재생에너지로서 바람의 힘을 이용한 풍력발전단지가 전국에 설치되면서 소음 문제가 대두되고 있다. 환경영향평가 및 사후환경영향평가에서도 풍력발전단지에 대한 배경소음 및 저주파소음을 측정하도록 하고 있으며, 특히 저주파소음은 환경부에서 2018년 공표한 저주파소음 관리 가이드라인에 따라 생활소음 측정방법을 준용하여 측정하도록 규정하고 있다. 고풍속에서 큰 소음을 발생시키는 풍력발전기의 특성상 고풍속에서 소음 측정이 이루어져야 하나 풍속이 증가할 경우 풍잡음이 증가하여 생활소음 및 저주파소음이 제대로 평가되지 못하는 문제가 발생되었다. 따라서 풍력발전기에서 발생되는 소음의 종류를 확인하고 풍잡음 등 풍력소음 측정시 고려되어야 할 사항을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.319-322
• /
• 1998

A 20 GHz 2-stage MMIC (Monolithic Microwave Integrated Circuits) LNA(Low Noise Amplifiers) has been designed. The pHEMT with gate length of 1.15 um has been used to provide ultra low noise and high gain amplification. Series and Shunt feedback circuits were interted to ensured high stability over frequency range of DC to 60 GHz. The size of designed MMIC LNA is 2285um x 2000um(4.57mm2). The simulated noise figure of MMIC LNA is less than 1.7 dB over frequency range of 20 GHz to 21 GHz.

• 한국건설관리학회논문집
• /
• 제15권2호
• /
• pp.12-22
• /
• 2014

건설현장에서 발생하는 소음으로 인하여 많은 사람들이 고통을 겪고 있고, 그로 인하여 민원과 분쟁이 증가하고 있다. 이러한 민원은 사업의 지연 및 중단, 배상액 지불과 같은 시간적, 경제적 손실을 초래하므로 엄격하게 관리되어야 한다. 이와 같은 추세에 따라 정부는 기존 방음벽 중심의 소음정책에서 탈피하여 발생원 중심으로 소음을 관리하기 위해 노력하고 있다. 그러나 건설소음은 일시적이고, 불규칙적으로 발생하며, 건설장비 자체의 소음레벨이 높기 때문에 쉽게 제어되기 어렵다. 또한 최근 선진국을 중심으로 사람들에게 쉽게 인지되지는 않지만, 고주파 소음과 마찬가지로 인체에 정신적, 신체적 피해를 주는 저주파 소음에 대한 연구를 활발히 진행하고 있다. 그러나 기존의 수동적인 소음관리방식으로는 고주파 소음을 저감하는데 효과가 있을 뿐, 저주파 소음을 저감하는데는 한계가 있다. 그러므로 본 연구는 건설현장에서 발생하는 소음을 저감하고, 기존의 수동적인 소음관리방식의 한계점을 보완하기 위한 방법으로 능동소음제어를 이용하여 건설현장에서 발생하는 소음을 저감하기 위한 관리모델을 제안하는 것을 목적으로 한다. 이를 위하여 시뮬레이션 실험을 수행하였고, 능동소음제어의 건설현장 적용성을 검토하였다. 본 논문은 능동소음제어를 통하여 건설현장에서 발생하는 소음을 저감하고, 소음피해로 인한 민원과 분쟁을 최소화하는데 일조할 수 있을 것이라 기대한다.