• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.2
• /
• pp.1-9
• /
• 2020

A smart factory is a key industrial application introduced by the 4^th industrial revolution. The automatic guided vehicle (AGV) is one of the technology realizing smart factory, but the development cost is high due to its early stage of technology. Although developing a low-cost AGV requires a lot of data, it has limited data acquisition capability because of the limited storage and the AGV movement. Hence, we propose a development environment using Bluetooth to collect data and design a lane detector. The proposed lane detector shows a high lane detection ratio regardless of light variation and a shade.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.5
• /
• pp.294-302
• /
• 2021

In this study, the 3D printing technique called design for additive manufacturing (DfAM) that is widely used in various industries was applied to marine leisure ships of equipment. The DfAM for the stanchion for crew safety was applied to the equipment used in an actual recreational craft. As design constraints, the design alternatives were not to exceed the safety and weight of the existing stainless steel material, which were reviewed, and the production of a low-cost FFF-type 3D printing method that can be used even in small shipyards was considered. Until now, additive manufacturing has been used for manufacturing only prototypes owing to its limitations of high manufacturing cost and low strength; however, in this study, it was applied to the mass production process to replace existing products. Thus, a design was developed with low manufacturing cost, adequate performance maintenance, and increased design freedom, and the optimal design was derived via structural analysis comparisons for each design alternative. In addition, a life-cycle assessment based on the ISO 1404X was conducted to develop sustainable products. Through this study, the effectiveness of additive manufacturing was examined for future applications in the shipbuilding industry.

• Investigative Magnetic Resonance Imaging
• /
• v.23 no.3
• /
• pp.179-201
• /
• 2019

Portable low-cost magnetic resonance imaging (MRI) systems have the potential to enable "point-of-care" and timely MRI diagnosis, and to make this imaging modality available to routine scans and to people in underdeveloped countries and areas. With simplicity, no maintenance, no power consumption, and low cost, permanent magnets/magnet arrays/magnet assemblies are attractive to be used as a source of static magnetic field to realize the portability and to lower the cost for an MRI scanner. However, when taking the canonical Fourier imaging approach and using linear gradient fields, homogeneous fields are required in a scanner, resulting in the facts that either a bulky magnet/magnet array is needed, or the imaging volume is too small to image an organ if the magnet/magnet array is scaled down to a portable size. Recently, with the progress on image reconstruction based on non-linear gradient field, static field patterns without spatial linearity can be used as spatial encoding magnetic fields (SEMs) to encode MRI signals for imaging. As a result, the requirements for the homogeneity of the static field can be relaxed, which allows permanent magnets/magnet arrays with reduced sizes, reduced weight to image a bigger volume covering organs such as a head. It offers opportunities of constructing a truly portable low-cost MRI scanner. For this exciting potential application, permanent magnets/magnet arrays have attracted increased attention recently. A magnet/magnet array is strongly associated with the imaging volume of an MRI scanner, image reconstruction methods, and RF excitation and RF coils, etc. through field patterns and field homogeneity. This paper offers a review of permanent magnets and magnet arrays of different kinds, especially those that can be used for spatial encoding towards the development of a portable and low-cost MRI system. It is aimed to familiarize the readers with relevant knowledge, literature, and the latest updates of the development on permanent magnets and magnet arrays for MRI. Perspectives on and challenges of using a permanent magnet/magnet array to supply a patterned static magnetic field, which does not have spatial linearity nor high field homogeneity, for image reconstruction in a portable setup are discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.284-289
• /
• 2005

A structural design system is developed for the optimum design of double hull tankers based on the multi-objective function method. As a multi-objective function method, Pareto optimal based random search method is adopted to find the minimum structural weight and fabrication cost. The fabrication cost model is developed by considering the welding technique, welding poses and assembly stages to manage the fabrication man-hour and process. In this study, a new structural design is investigated due to the rapidly increased material cost. Several optimum structural designs on the basis of high material cost are carried out based on the Pareto optimal set obtained by the random search method. The design results are compared with existing ship, which is designed under low material cost.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.3
• /
• pp.114-121
• /
• 2004

Switched reluctance motors have received much attention as a driving means for various industrial applications because they have simple construction, low cost and high efficiency. Nevertheless, the requirements of drive converters make it difficult to lower the overall system cost as compared with the DC motor application. Single phase switched reluctance motors (SPSRMs) provide a solution to the high cost problem since the number of switching power devices can be reduced and consequently the trials for application are increased. However, research involving SPSRMs, especially in the area of design work, is insufficient. This paper introduces a novel design methodology of single phase SRM. The design work for SPSRM comprises the determination of many variables such as stator and rotor pole arc as well as on, off and so on. Managing all variable combinations leads to lengthy computation time and a fault in the design process. For that reason, a reliable technique and brief procedure term are required in SPSRM design.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.62-68
• /
• 2007

H.264 video compression in digital multimedia broadcasting (DMB) shows significantly high compression ratio over conventional algorithms, while its required hardware cost and power consumption are also $3{\sim}5$ times larger. Consequently, low-hardware-cost and low-power H.264 decoder SoC is essential for commercial digital multimedia broadcasting terminals. This paper describes low-power design and implementation of core blocks in H.264 decoder SoC.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.268-283
• /
• 2016

Aircraft manufacturing companies have to consider multiple derivatives to satisfy various market requirements. They modify or extend an existing aircraft to meet new market demands while keeping the development time and cost to a minimum. Many researchers have studied the derivative design process, but these research efforts consider baseline and derivative designs together, while using the whole set of design variables. Therefore, an efficient process that can reduce cost and time for aircraft derivative design is needed. In this research, a more efficient design process is proposed which obtains global changes from local changes in aircraft design in order to develop aircraft derivatives efficiently. Sensitivity analysis was introduced to remove unnecessary design variables that have a low impact on the objective function. This prevented wasting computational effort and time on low priority variables for design requirements and objectives. Additionally, uncertainty from the fidelity of analysis tools was considered in design optimization to increase the probability of optimization results. The Reliability Based Design Optimization (RBDO) and Possibility Based Design Optimization (PBDO) methods were proposed to handle the uncertainty in aircraft conceptual design optimization. In this paper, Collaborative Optimization (CO) based framework with RBDO and PBDO was implemented to consider uncertainty. The proposed method was applied for civil jet aircraft derivative design that increases cruise range and the number of passengers. The proposed process provided deterministic design optimization, RBDO, and PBDO results for given requirements.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2162-2167
• /
• 2009

A Low cost and variable speed brushless motor drive system with single switch per phase is presented. The motor drive is realized with a novel two-phase flux-reversal-free switched reluctance motor and a split AC two switch converter. The strategy of the controller and the converter for its realization are described. Comparisons between a split AC converter, asymmetric converter, split DC converter, single controllable switch converter, and N+1 converter are performed for its device rating, cost, switching losses and conduction losses, and converter efficiency. The split AC converter is analyzed and simulated to verify the characteristics of the converter circuitry and control feasibility and the simulation results are presented. The efficiency with various loads is numerically estimated and experimentally compared from viewpoint of subsystem and system in details. The focus of this paper is to compare the presented motor drive system to the asymmetric converter system throughout experiments and demonstrate single switch per phase converter having comparable efficiency as the asymmetric converter system.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.39-49
• /
• 2013

Purpose - This study attempts to examine the underlying dimensions of service quality (tangibility, reliability, responsiveness, assurance, and empathy) for low-cost carriers. It subsequently seeks to determine the effect of the relationships of the dimensions of service quality, airline image, and behavioral intentions on airline services to provide adequate basic information and attributes for developing differentiated and competitive service marketing strategies. Research design, data, and methodology - The survey for this study was conducted on patrons with low-cost carrier boarding experiences in districts near universities and central businesses of Seoul and Busan from 5/10/2012 to 16/10/2012. Out of 346 questionnaires, 20 questionnaires with missing data and insincere answers were excluded for this study. Collected data were processed using SPSS 18.0, and the hypothesis was verified by analyzing the structural equation model with Lisrel 8.54. First, the frequency analysis was conducted to identify universal characteristics. Second, the exploratory factor analysis and reliability analysis were conducted to identify the accuracy of the variable measurements of the construct. Third, to assess uni-dimensionality and reliability, confirmatory factor analysis was conducted. Finally, to verify the adequacy of the research model and research hypothesis, the structural model was employed. Results - The results revealed that the factors, "tangibility, reliability, responsiveness, assurance, and empathy" were shown to be the most important dimensions of service quality for the airline image of the low-cost carrier which was consistent with previous studies. Therefore, it is fair to suggest that these verified factors are crucial attributes for the brand image of low-cost carriers. Second, as reliability and responsiveness were shown to be the most important factors for behavioral intentions, it is viable to suggest that these two attributes are crucial for the sales value of low-cost carriers. Further, it was found that the brand image of low-cost carriers was closely related to behavioral intentions. Therefore, in order to ensure the competitiveness and loyalty of patrons, the airline image value is a crucial attribute. Conclusions - The result of this study established that service quality is the most important attribute for marketing to ensure competitiveness, and intensive and differentiated service marketing play a crucial role in creating profits for low-cost carrier companies. First, as tangibility is found to be the most crucial factor in ensuring service quality, quality control and maintenance of medium and small carriers must be provided to ensure reliability, as they are the main attributes of low-cost carriers. Second, in order to promote positive behavioral intentions, it is essential to enhance the value of airline image. Third, in order to ensure competitiveness, it is imperative to carry out intensive and differentiated service marketing. Therefore, to promote the image of low-cost carriers and enhance behavioral intentions, the level of service quality must be secured by developing appropriate service improvement programs.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.695-698
• /
• 2005

The finite-field multiplication can be applied to the wide range of applications, such as signal processing on communication, cryptography, etc. However, an efficient algorithm and the hardware design are required since the finite-field multiplication takes much time to compute. In this paper, we propose a radix-4 systolic multiplier on $GF(2^m)$ with comparative area and performance. The algorithm of the proposed standard-basis multiplier is mathematically developed to map on low-cost systolic cell, so that the proposed systolic architecture is suitable for VLSI design. Compared to the bit-serial and digit-serial multipliers, the proposed multiplier shows relatively better performance with low cost. We design and synthesis $GF(2^{193})$ finite-field multiplier using Hynix $0.35{\mu}m$ standard cell library and the maximum clock frequency is 400MHz.