• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.4
• /
• pp.232-243
• /
• 2002

There are many methods for improving TLB (translation lookaside buffer) performance, such as increasing the number of entry in TLB, supporting large page or multiple page sizes. The best way is to support multiple page sizes, but any operating system doesn't support multiple page sizes in user mode. So, we propose the new structure of TLB supporting two pages to obtain the effect of multiple page sizes with high performance and at low cost without operating system support. we propose a new TLB structure supporting two page sizes dynamically and selectively for high performance and low cost design without any operating system support. For high performance, a promotion-TLB is designed by supporting two page sizes. Also in order to attain low power consumption, a banked-TLB is constructed by dividing one fully associative TLB space into two sub-fully associative TLBs. These two banked-TLB structures are integrated into a banked-promotion TLB as a low power and high performance TLB structure for embedded processors. According to the results of comparison and analysis, a similar performance can be achieved by using fewer TLB entries and also power consumption can be reduced by around 50% comparing with the fully associative TLB.

• Ceramist
• /
• v.22 no.4
• /
• pp.402-416
• /
• 2019

The development of next-generation secondary batteries, including lithium-ion batteries (LIB), requires performance enhancements such as high energy/high power density, low cost, long life, and excellent safety. The discovery of new materials with such requirements is a challenging and time-consuming process with great difficulty. To pursue this challenging endeavor, it is pivotal to understand the structure and interface of electrode materials in a multiscale level at the atomic, molecular, macro-scale during charging / discharging. In this regard, various advanced material characterization tools, including the first-principle calculation, high-resolution electron microscopy, and synchrotron-based X-ray techniques, have been actively employed to understand the charge storage- and degradation-mechanisms of various electrode materials. In this article, we introduce and review recent advances in in-situ synchrotron-based x-ray techniques to study electrode materials for LIBs during thermal degradation and charging/discharging. We show that the fundamental understanding of the structure and interface of the battery materials gained through these advanced in-situ investigations provides valuable insight into designing next-generation electrode materials with significantly improved performance in terms of high energy/high power density, low cost, long life, and excellent safety.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.929-938
• /
• 2015

Maximum power point tracking (MPPT) and battery charging control are two important functions for a solar battery charger. The former improves utilization of the available solar energy, while the latter ensures a prolonged battery life. Nevertheless, complete implementation of both functions can be complex and costly, especially for low voltage application such as standalone street lamps. In this paper, the operation of a solar battery charger for standalone street light systems is investigated. Using only one voltage sensor, the solar charger is able to operate in both MPPT and constant voltage (CV) charging mode, hence providing high performance at a low cost. Using a lab prototype and a solar simulator, the operation of the charger system is demonstrated and its performance under varying irradiance is validated.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.105-111
• /
• 2004

This paper describes the design of navigation system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated nowdays use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of navigation for low cost unmanned aerial vehicle, unmanned target drone as our test bed in this paper is verified by both Hardware in the loop simulation(HILS) to test performance of GPS as GPS output frequency high and results of flight test.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.179-187
• /
• 2008

In this paper, we carried out the performance evaluation of depolarized fiber optic gyroscope(D-FOG) that was designed and fabricated with the low-cost optical communication single mode fiber and depolarizer. In order to reduce the phase error of D-FOG, the circuit of stabilized current and temperature of the light source was made and the performance was analyzed. The current and the temperature stability of the fabricated stabilization circuit were less than $200{\mu}A$ and $0.0098^{\circ}C$, respectively. Also, the D-FOG's experimental result showed that the value of the dynamic range of rotated rate, the scale factor error with a good linearity, and the zero bias drift were ${\pm}50^{\circ}/s$, 2.8881%, and $19.49^{\circ}/h$, respectively. The results indicated that a low-cost FOG was able to fabricate which was more cost effective than conventional FOG with a high-cost high-birefringent polarization maintaining fiber.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.365-373
• /
• 2019

An Image Infra-Red(IIR) seeker is widely used for precision guided munitions to provide intelligent and precise target detection in terms of high kill probability. However, there have been issues in determining the performance versus cost trade-offs due to high cost of seeker comparing to other units of the munitions. In this paper, performance/cost evaluations have been carried out to find the most cost-effective solution for developing the IIR seekers. The relationships between the critical parameters and cost are investigated to determine the optimal point which represents the low cost with high performance. It is expected that the presented approach will be able to be used for guidelines to select the appropriate IIR seeker for the given operating conditions and can be useful to estimate the cost effectiveness of the precision guided munitions at early design stage.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.391-394
• /
• 2011

3rd party content service is a consumer-based wide selection of contents in which IPTV provider believes will enhance the service considerably extending the variety of contents to finally provide a personalized service. Therefore, the combination of 3rd party content services and the IPTV infrastructure creates a good revenue opportunity but they need to be created. IPTV offers to create personalized channels to distribute 3rd party content service. However, the cost of $3^{rd}$ party content delivery is high when the service is provided from a faraway server. IPTV provider requires an effective strategy of replica placement to minimize the cost without a tradeoff on the performance. We propose a cluster-based strategy of replica placement to find the right balance between cost and performance. The results demonstrate the achievement of an outstanding delivery time and low cost.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.75-82
• /
• 2012

Elimination of rotor position sensors mechanically coupled with the rotor shaft is attractive to variable speed drives primarily due to increased system reliability and cost reduction. In this regard, search for a simple and robust position sensorless control has been intensified in past few years specifically for low-cost, high-volume applications such as home appliances. This paper describes a new parameter insensitive position sensorless control for switched reluctance motor (SRM) drives satisfying such a need in this market segment. Two consecutive switch-on times of the controllable switch in hysteresis current control are compared to estimate the rotor position and speed. The proposed sensorless control algorithm is very simple to implement since it does not depend on extensive computation or any additional hardware. In addition, the proposed method is robust in that its dynamic performance is least affected by system parameter variations. The proposed approach is demonstrated on a single-controllable-switch-converter-driven SRM with two-phases that lends itself to a system with low cost and compact packaging which comes close to the intended applications. Analysis and simulation results followed by experimental verification are presented to demonstrate the feasibility of the proposed sensorless control method.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.1
• /
• pp.74-83
• /
• 2007

These days business logistics has become one of the very important factors of logistics cost reduction and customer service satisfaction. In order to control business logistics more effectively, many companies must be concerned about logistics performance.This study aims at analyzing information system characteristic and logistics performance. The information system characteristic variables are considered IS resource, IS strategic role. The logistics performance variables are considered logistic cost, customer service.For data on the 301 sampled company, a mail survey using a questionnaire was conducted in this study. The following results were obtained.First, IS characteristic variables were significant for logistics performance. Specially, efficient management of IS manpower and IS planning, present IS were significant for logistics performance. Second, there also were IS manpower and IS planning, present IS that indentifing high logistics performance group and low logistics performance group.