• Journal of the Korean Society of Propulsion Engineers
• /
• v.27 no.1
• /
• pp.49-57
• /
• 2023

The autogenous pressurization has been widely adopted for propulsion systems of next-generation reusable rockets due to its low cost and high reliability. The autogenous pressurization has a simple structure, but an understanding of the heat and mass transfer occurring inside the tank is essential. For this reason, a simulation test of the autogenous pressurization was conceived. The experiment equipment was constructed based on overseas pressurization test facilities cases and expert advice. Unlike the actual autogenous pressurization system, the propellant tank was insulated to exclude external influences. The pressurized gas supply line and the propellant pipe were separated. Using the manufactured autogenous pressure experiment equipment, it is possible to evaluate the condensation phenomenon of pressurants in cryogenic propellants, comparison of the efficiency of pressurization using helium and evaporated gas and the pressurization capacity according to the temperature of pressurant.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.16-21
• /
• 2020

Recently, mobile traffic is increasing exponentially as major traffic is transferred to IoT and visual media data in the dissemination of mobile communication terminals and contents use. In order to overcome the limitations of the existing LTE system, 5G mobile communication technology (5G) is a technology that meets 1000 times data traffic capacity, 4G LTE system acceptance, low latency, high energy efficiency, and high cost compared to 4G LTE system. The path loss due to the use of the frequency domain is very high, so it may be difficult to provide a service compared to the existing 4G LTE system. To overcome these shortcomings, various techniques are under study. In this paper, small cell technology is introduced to improve the system performance of 5G mobile communication systems. The performance is analyzed by comparing the results of small cell technology application, macro communication and small cell communication, and the results of the proposed algorithm application for power control. The analysis results show that the use of small cell technology in the 5th generation mobile communication system can significantly reduce the shadow area and reduce the millimeter wave path loss problem.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.1-6
• /
• 2006

The noncontact optical sensor using the hologram laser and automatic power controller is developed to measure a thickness of transparent objects and achieve excellent performance. Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition the casting glass under high temperature results in extending the size of sensor body. The accuracy of the sensor is degraded due to these reasons. In this paper, to overcome these problems, we proposed a low cost non-contact optical sensor that is composed of a hologram laser unit used for optical pickup of CD player and a plastic lens. Therefore the problems caused by the contact sensor are solved by using the noncontact sensor. The noncontact sensor has to move toward the objects and obtain the focus error signal to measure a position of transparent objects. While the internal temperature of the sensor is controlled under ${\pm}0.1^{\circ}$, many trials shows ${\pm}2{\mu}m$ measurement error as excellent performance.

• Journal of Platform Technology
• /
• v.6 no.2
• /
• pp.3-9
• /
• 2018

Recently VR environment is used in many areas including mobile learning, smart factory. However HMD(head-mounted display) is required to a dedicated and expensive system with high-end specification. When designing a VR system, it is needed to handle performance, mobility and usability. Many VR applications need to handle diverse sensors and user inputs continuously in a streaming manner. In this paper we design a VR mobile platform and implement a low-cost mobile VR HMD running on the platform. The VR HMD supports 3D contents delivery in a mobile manner. It is used to detect the motion detection based on angle value of a VR player from accelerator and gyro sensor. The MPU-6050, 6-axis sensor, is used to get a sensory value and the sensory value is taken as an input to a VR rendering server on a Unity game engine that is generated 3D images.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.119-124
• /
• 2022

The international gnss service (IGS) provides real-time service (RTS) orbit and clock correction applicable to the broadcast ephemeris of GNSS satellites. However, since the RTS correction cannot be received if the Internet connection is lost, the RTS correction should be predicted and used when a signal interruption occurs in order to perform stable precise point positioning (PPP). In this paper, PPP was performed by predicting orbit and clock correction using a long short-term memory (LSTM) algorithm in real-time during the signal loss. The prediction performance was analyzed by implementing the LSTM algorithm in RPI (raspberry pi), the processing speed of which is not high. Compared to the polynomial prediction model, LSTM showed excellent performance in long-term prediction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.43-49
• /
• 2008

The Real Time Location System (RTLS) is very important in the ubiquitous society for real time tracking of men, high price assets, and logistics products. In this work, we developed an active RF system for RTLS and tested its performance. The RTLS system developed in this work was constructed of three active readers and one active tag. The small size tag developed in this work operated with a coin type battery. To make the tag smaller, we used an internal PCB antenna and a chip antenna. We tested the performance of the tag. To reduce the manufacturing cost of our RF system, we used low price RF transceiver CC2510 chip-set. The CC2510 chip-set provided RSSI(Received Signal Strength Indicator) signal which could be used to determine the distances between an active tag and three active readers.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.252-259
• /
• 2007

With the rapid development of multimedia applications and wireless communication networks, consumer demand for video-over-wireless capability on mobile computing systems is growing rapidly. In this regard, this paper introduces YUV-aware instructions that enhance the performance and efficiency in the processing of color image and video. Traditional multimedia extensions (e.g., MMX, SSE, VIS, and AltiVec) depend solely on generic subword parallelism whereas the proposed YUV-aware instructions support parallel operations on two-packed 16-bit YUV (6-bit Y, 5-bits U, V) values in a 32-bit datapath architecture, providing greater concurrency and efficiency for color image and video processing. Moreover, the ability to reduce data format size reduces system cost. Experiment results on a representative dynamically scheduled embedded superscalar processor show that YUV-aware instructions achieve an average speedup of 3.9x over the baseline superscalar performance. This is in contrast to MMX (a representative Intel#s multimedia extension), which achieves a speedup of only 2.1x over the same baseline superscalar processor. In addition, YUV-aware instructions outperform MMX instructions in energy reduction (75.8% reduction with YUV-aware instructions, but only 54.8% reduction with MMX instructions over the baseline).

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2020

The thermal image device support image to detect infrared light from the object without light. It can use not only defence-related industry, but also civilian industry. This paper presents a new thermal image processing module using common image processor. The proposed module shows 10~20% performance improvement with normal mode and 50% performance improvement with sleep mode compared with the previously thermal image module based FPGA. and it guarantees high scalability according to modular system. In addition, the proposed module improves modulation and reuse, so it expect to have reduction of development period, low development cost. various application. In addition, it expect to have satisfaction of customer requirements, development design, development period, release date of product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1639-1649
• /
• 1998

For mobile multimedia services, wireless ATM(Asynchronous transfer Mode) network is studied actively. In wireless ATM network, the existing signaling protocols generate heavy traffics for HLR due to the centralized structure that all signaling loads mush be handled in HLR(Home Location Register). Also, centralized structure causes critical connection setup delays. Thus, it is important that wireless ATM reduces the connection setup delays occurred due to high traffic loads of signaling based on distributed processing. In this thesis, we propose a cache strategy for call delivery as well as the cache updates of registration based on ATM multicasting and compares the cost of cache scheme with that of conventional scheme. Our study shows that cache scheme has better performance than the conventional methods in the case that the portable mobility is low and traffic density is large.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.363-372
• /
• 2009

For large scale VOD service, cluster servers are spotlighted to their high performance and low cost. A cluster server usually consists of a front-end node and multiple back-end nodes. Though increasing the number of back-end nodes can result in the more QoS streams for clients, the possibility of failures in back-end nodes is proportionally increased. The failure causes not only the stop of all streaming service but also the loss of the current playing positions. In this paper, when a back-end node becomes a failed state, the recovery mechanisms are studied to support the unceasing streaming service. For the actual VOD service environment, we implement a cluster-based VOD servers composed of general PCs and adopt the parallel processing for MPEG movies. From the implemented VOD server, a video block recovery mechanism is designed on parity algorithms. However, without considering the architecture of cluster-based VOD server, the application of the basic technique causes the performance bottleneck of the internal network for recovery and also results in the inefficiency CPU usage of back-end nodes. To address these problems, we propose a new failure recovery mechanism based on the pipeline computing concept.