• 대한물리의학회지
• /
• 제13권4호
• /
• pp.67-74
• /
• 2018

PURPOSE: This study was conducted to investigate the effects of vibration frequency and amplitude on scapular winging during the knee push-up plus exercise. METHODS: A total of 26 female subjects with scapular winging were evaluated while performing the knee push-up plus exercise with no vibration, low-frequency/low-amplitude (5 Hz/3 mm) vibration, low-frequency/high-amplitude (5 Hz/9 mm) vibration, high-frequency/low-amplitude (15 Hz/3 mm) vibration, and high-frequency/high-amplitude (15 Hz/9 mm) vibration. The surface EMG of the serratus anterior (SA) muscle was compared between the vibration frequency and amplitude. The EMG amplitude was normalized using the maximal voluntary isometric contraction (MVIC). The statistical significance of the results was evaluated using one-way ANOVA. RESULTS: The SA muscle EMG values increased at low-frequency/low-amplitude vibration and at low-frequency/high-amplitude vibration compared to no vibration. Furthermore, the same values increased at high-frequency/low-amplitude vibration and high-frequency/high-amplitude vibration compared to no vibration. In general, a higher vibration frequency and amplitude was associated with higher EMG values of the SA muscle, with particularly greater increases observed during high-frequency/high-amplitude vibration. There was also a significant difference between each condition with a high-frequency/high-amplitude vibration (p<.05). CONCLUSION: This study suggests that there were remarkable clinical effect of the knee push-up plus exercise with vibration, which enhanced the SA muscle activation in persons with scapular winging. Furthermore, applying a higher vibration frequency and amplitude more effectively increased for increasing SA muscle activation.

• 화약ㆍ발파
• /
• 제28권1호
• /
• pp.11-18
• /
• 2010

본 고에서는 기존 미진동파쇄기류(미진동파쇄기, 플라즈마 등)의 단점인 시공성 및 경제성을 개선하고, 발파진동을 최소화한 미진동화약(NewFINECKER)의 개발 및 현장적용 사례를 소개하였다. 이 미진동화약은 국토해양부 표준발파패턴중(中) Type-1(미진동굴착공법, 125g 미만의 폭약 사용)에 부합하며, 지발발파가 가능하고, 시공성 및 작업효율을 대폭 개선하는 반면 진동수준은 일반 에멀젼폭약(NewMITE)의 약 60~70% 수준으로 나타났다. 추가적으로 현장 적용시 표준발파패턴, 발파진동추정식, 시공방법 등을 본 연구에 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1889-1893
• /
• 2000

During the test drive of developing vehicle, a low frequency vibration of sprung mass on front outer wheel has been frequently observed in cornering with some speed. The purpose of this paper is to investigate the low frequency vibration of the sprung mass. The analysis result shows that the low frequency vibration is caused by sudden migration of the center of gravity of vihicle and it is determined by geometric points of suspension.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.254-258
• /
• 2009

In this paper, the low frequency vibration forming system is developed for micro-patterns formation on the metal substrate. many researchers have studied about micro-forming technologies such as micro deep drawing, press forming, forging, extrusion etc. for the formation of precise micro-patterns on the surface of metal substrates, multi-step forming process must be used to improve qualifies of the deformed patterns. Since the low frequency vibration forming system could easily deform the surface of metal substrates, several steps of multi-step forming process should be removed by using the low frequency vibration forming system. In order to find optimal process conditions, we have carried out low frequency vibration forming process with varying the vibration frequency from 110Hz to 500Hz.

• 화약ㆍ발파
• /
• 제30권2호
• /
• pp.59-65
• /
• 2012

본 고에서는 기존 기계식 굴착공법 및 암파쇄공법(플라즈마, 겔파쇄 등)의 단점인 시공성 및 경제성을 개선하고, 발파진동을 최소화한 미진동화약(LoVEX)의 개발 및 현장적용 사례를 소개하였다. 이 미진동화약은 국토해양부 표준발파패턴중(中) Type-1(미진동굴착공법, 125g 미만의 폭약 사용)에 부합하며, 지발발파가 가능하고, 시공성 및 작업효율을 대폭 개선하는 반면 진동수준은 일반 에멀젼폭약의 약 60~70% 수준으로 나타났다. 추가적으로 현장 적용시 표준발파패턴, 발파진동추정식, 시공방법 등을 본 연구에 제시하였다.

• 한국지반환경공학회 논문집
• /
• 제14권9호
• /
• pp.21-30
• /
• 2013

국내의 소음 진동규제는 점점 더 강화되고 있어 현재의 저소음 저진동공법보다 더 환경친화적인 공법이 필요하게 되었다. 이 연구에서는 소음 및 진동 저감을 위한 스크류콘크리트말뚝공법의 특징에 대하여 설명하였으며 국내 특정 현장에서 시험시공을 실시하고 소음과 진동을 측정하였다. 진동의 경우 측정진동은 7.5m 내에서 진동규제기준을 만족하였다. 소음의 경우 측정소음은 15.0m에서 소음규제기준을 2dB(A) 정도 초과하는 것으로 나타났으나 이는 국내에서 시공되고 있는 기존 저소음 저진동 말뚝공법의 측정치보다 5~20dB(A) 정도 저감된 값이었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.176-181
• /
• 2003

Damages by vibration and noise due to the construction performance are increasing. The rise of construction demand and enlargement of equipments are major reasons of this damage. As a result, the enmity of the people is provoked and this appears to be an obstacle of construction work. Especially, in case of ground improvement construction. Casing pipe is inserted into the Sand Drain, Sand Compaction Pile and Vibrated Crushed-stone Pile by vibration power when carrying out. Hence, a pillar is formed and it creates vibration and noise. This causes a lot of restrictions to construction condition. The low Vibration and low noise construction equipments uses earth auger and hydrulic cylinder for insertion and chopping operation instead of vibro hammer, which is the source of vibration and noise. This minimize ground disturbanceand decrease vibration and noise successfully, but increase chopping effect greatly. Thus, this new equipment is not only suitable for environment but also excellent engineering method of construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.496-506
• /
• 2009

Various the low noise & vibration pile methods were developed and used in many construction sites. Low noise & vibration pile methods must be used essentially from the sites where popular complints would be expected. In this paper, low noise & vibration pile methods and screw pile methods were investigated, noise & vibration-free screw PHC pile method, also, was studied and its constructibility and applicability were analyzed.

• 대한물리의학회지
• /
• 제2권2호
• /
• pp.135-142
• /
• 2007

Purpose : To investigate the effectiveness of local vibration and interferential therapy for patient with acute low back pain. Methods : A randomized trial designed to compare interferential therapy and local vibration therapy for acute low back pain in primary care setting Results : A total of 60 patients were recruited. The two treatment groups had similar demographic and clinical baseline characteristics. The mean VAS scores before treatment was 8.290 for interferental therapy group and 8.572 for local vibration therapy groups. After treatment, this VAS score had dropped to 4.812(interferental therapy group, at 7 days), and 4.945(local vibration group, at 7 days). Conclusion : This study shows a progressive fall in visual analog scale scores in patients with acute low back pain treated with either interferential therapy and local vibration therapy. There was some difference in the improvement between the two groups at 1 to 4 days, VAS score of vibration therapy groups was low better than interferential therapy groups.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.299-306
• /
• 2011

This study investigated the SIP-method as a low-vibration, low-noise engineering method. The ground vibrations caused by the SIP-method were measured and analyzed in each step. From the analysis results, quantitative ground vibration values and reliable vibration estimation equations were proposed. Furthermore, the ground vibrations caused by the SIP-method were compared with the ground vibrations caused by other methods presented by existing studies. Based on the vibration estimation equation with 50 % reliability, the ground vibration values by the SIP-method at the distance of 10~150 m corresponded to 17~57 % of the ground vibration values by the equation proposed by Attewell & Famer, and 14~96 % of the ground vibration values by the equation proposed by Prof. Park in his study using a diesel drop hammer. These results showed that the ground vibration reduction effect of the SIP-method was higher those of other general engineering methods. Finally, the permissible scope of work using the SIP-method which meets the domestic vibration standards was presented.