• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.111-119
• /
• 2016

Gas-Liquid multiphase flow simulation has been carried out using the Lattice boltzmann method. For the interface treatment, pseudo-potential model (Shan-Chen) was used with the Carnahan-Starling equation of state. Exact Difference Method also applied for the treatment of the force term. Through the developed code, we simulated coexsitence structure of high and low density, phase separation, surface tension effect, characteristics of moving interface, homogeneous and heterogeneous cavitation and bubble collaps.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.113-119
• /
• 2002

Nanoimprint lithography (NIL) is a nanofabrication method known to be a low cost method of fabricating nanoscale patterns as small as 6 m. This study is focused on understanding physical phenomena in the embossing of nano/micro scale structures with 100 nm minimum feature size. We present the effects of capillary force and width of stamp groove on flow behavior at the embossing stage through numerical experimentation. We also compare our numerical results with previous experimental results and discuss our results.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.312-316
• /
• 2014

The joining behavior of forsterite ceramics to SUS304 alloy using $8PbO-78Bi_2O_3-8B_2O_3-4ZnO-2SiO_2$ (wt%) system glass frit was investigated. The contact angle was smaller than $90^{\circ}$ at a temperature of $460^{\circ}C$. Redox reaction at the interface between forsterite and SUS304 was found to appear when the electrons in the metal part moved toward the glass part and the oxygen ions in glass moved to the metal side. The decrease of the surface tension due to the PbO solubility on the forsterite side contributed to the better wetting behavior at low temperature.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.10 no.1
• /
• pp.24-41
• /
• 1984

Tallow fatty acid consists of mixtures of fatty acids differing in chain length and saturation. In separation of tallow fatty acid, the effects of the type and concentration of detergents and electrolytes were studied. And the changes of acid composition of particular fractions were determined by gas-chromatography. Sodium lauryl sulfate (SLS), sodium lauryl ether sulfate (SLES) and sodium lauryl benzene sulfonate (SLBS) were used as detergents and NaCl, Na2SO4 and MgSO4 were used as electrolytes. At low concentration of detergent, the tallow fatty acid was not fully wetted, and at high concentration, the emulsion was so stable that the tallow fatty acid was not well separated. The addition of proper amount of electrolyte increased the separation efficiency by the decrease of interfacial tension and by the increase of the amount of adsorbed detergent on the surface of solid fatty acid crystals. The optimum range of detergent was 0.4-0.6% (wt.) in SLS, 0.2-0.4% in SLES and 2.0-) .0% in SLBS. And the optimum range of electrolyte was 2.0-2.5% in NaCl, 3.0-4.0% In Na2SO4 and 0.5-1.0% in MgSO4 respectively.

• Journal of ILASS-Korea
• /
• v.2 no.3
• /
• pp.8-16
• /
• 1997

Ta investigate characteristics and spray of emulsified fuet we are mixed water with diesel oil using ultrasonic energy fuel feeding system. Separation ratio of emulsified fuel was shown good condition that of water content is small and longer ultrasonic energy adding time. Viscosity of emulsified fuel increased 79% with addition to water content and surface tension increased 1.6% in comparision to pure diesel oil. The SMD of emulsified fuel adding ultrasonic energy decreased with 3% in comparision to pure diesel oil. With increasing 5, 10% water content the SMD decreased 15.6, 20.1% in comparision to pure diesel oil. The mind-explosion was investigated with 4step.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.570-577
• /
• 2008

Magnesium alloys are potentially useful as structural materials due to higher strength/weight ratio, heat conductivity and recyclability compared to other alloys. These alloys have attracted the interest of modern manufacturing such as the automobile, computer, communication and consumer electronic appliances industries. Hence welding techniques are required to be developed for these applications. Laser are known to be an excellent tool for them. This paper presents the laser weldability of AZ31 magnesium alloy with CW Nd:YAG laser. The low viscosity and surface tension of the melt pool make magnesium more difficult to weld than steel. As a result of this study, optimal process parameters could be obtained without weld defects. Also it was certain that cutting methods had influence on butt weldability.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.954-956
• /
• 1993

This paper describes the process of levitation melting of metals in an axisymmetric induction heating system. This process has advantages of low heat losses, heating with short times and clean operating conditions. The shape of molten metal is determined using sensitivity analysis and optimization technique. Electromagnetic, gravitational and surface tension energies are considered, and these energies are used as an objective function in optimization process. Electromagnetic field are calculated using the finite element method. The fact that volume is constant in the process is also considered as an equality constraint.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.51-56
• /
• 2013

This paper describes the atomization characteristics, as well as the velocity and size distribution, of DME spray based on common-rail injection system. To analyze the possibility of using DME fuel as an alternative fuel of diesel, spray atomization characteristics were investigated. For this investigation, two-dimensional phase Doppler analyzer system was used to obtain droplet size and velocity distribution simultaneously. Velocity and droplet size measurements were performed at various injection pressures. Results showed that increasing pressure from 25MPa to 50MPa leads to higher spray droplet velocities and smaller droplet diameter but injection pressure above 40MPa, no signifiant reduction was observed. With the droplet velocity and SMD comparison between diesel and DME fuel, it can be observed that DME has smaller SMD and droplet velocity due to its low surface tension.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.140-147
• /
• 2018

The performance of a hydrate anti-agglomerant (AA) on cyclopentane (CyC5) hydrate anti-agglomeration at various concentrations (0-1 wt%, based on the oil phase) using MMF apparatus has been investigated. At low AA concentrations up to 0.01 wt%, the AA reduces the cohesion force (capillary force) by reducing the CyC5-water interfacial tension. At concentrations higher than 0.1 wt%, hydrate hydrophobicity alternation and AA's thermodynamic inhibition effects are the main part of AA's mechanism. Additionally, a "temporary agglomeration" phenomenon caused by surface melting of the hydrate particles is also observed, which may indicate the AA's weak ability to produce stable water-CyC5 interface.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.78-84
• /
• 2014

Viscosity agents were added to water to improve extinguishing performance of low pressure water mist suppression system on wood cribs fire, and a small scale wood cribs fire experiment was conducted to measure the extinguishing performance. CMC and agar were used for viscosity agent and as the amount of viscosity agent enlarges, it showed the increase of the viscosity of aqueous solution and the decrease of the fluidity. On wood cribs fire experiment, the extinguishing efficiency was improved with supplemental viscosity agent as it enhanced the adhesive time of aqueous solution on the wood, and therefore expanded the contact time of fire surface. The surface tension of aqueous solution was decreased with the addition of agar which to be assumed as an increase factor of extinguishing efficiency. By the extinguishing experimental result, the most effective extinguishing agent was CMC 0.6 wt.%, with the flame suppression time and the extinguishing time were reduced by 70s and 93s respectively at this concentration.