• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.826-841
• /
• 2018

The military satellite communication of ROK military, ANASIS is designed for analog data such as voice and streaming data. ANASIS cannot fully support ALL-IP communications due to its long propagation delay. The next generation satellite communication system is being designed to overcome the limitation. Next generation satellite communications system considers both high-speed and low-speed networks to support various operating environment. The low-speed satellite supports both broadband and narrow-band communication. This network works as the infrastructure for of wide-area internetworking over multiple AS's in the terrestrial network. It requires minimum satellite frequency and minimum power and works without PEP and router. In this paper, we propose a network operation structure to enable the inter-operation between high and low-speed satellite networks. In addition, we propose a data link protocol for low speed satellite networks.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.327-333
• /
• 2019

Wind speed data constitute important weather information for aircrafts flying at low altitudes, such as drones. Currently, the accuracy of low altitude wind predictions is much lower than that of high-altitude wind predictions. Deep neural networks are proposed in this study as a method to improve wind speed forecast information. Deep neural networks mimic the learning process of the interactions among neurons in the brain, and it is used in various fields, such as recognition of image, sound, and texts, image and natural language processing, and pattern recognition in time-series. In this study, the deep neural network model is constructed using the wind prediction values generated by the numerical model as an input to improve the wind speed forecasts. Using the ground wind speed forecast data collected at the Boseong Meteorological Observation Tower, wind speed forecast values obtained by the numerical model are compared with those obtained by the model proposed in this study for the verification of the validity and compatibility of the proposed model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.285-290
• /
• 2006

This paper presents an adaptive neural network based controller and its application to Dynamic Positioning (DP) control system of ship. The proposed neural network based controller is developed for station-keeping and low-speed maneuvering control of ship. At first, the DP system configuration is described. And then, to validate the proposed DP system, computer simulations of station-keeping and low-speed maneuvering performance of a multi-purpose supply ship are presented under the influence of measurement noise, external disturbances such as sea current, wave, and wind. The simulations have shown the feasibility of the DP system in various maneuvering situations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.6
• /
• pp.695-704
• /
• 2002

Generally, induction motor controller requires rotor speed sensor for commutation and current control, but it increases cost and size of the motor. So in these days, various researches including speed sensorless vector control have been reported and some of them have been put to practical use. In this paper a new speed estimation method using neural networks is proposed. The optimal neural network structure was tracked down by trial and error, and it was found that the 8-16-1 neural network has given correct results for the instantaneous rotor speed. Supervised learning methods, through which the neural network is trained to learn the input/output pattern presented, are typically used. The back-propagation technique is used to adjust the neural network weights during training. The rotor speed is calculated by weights and eight inputs to the neural network. Also, the proposed method has advantages such as the independency on machine parameters, the insensitivity to the load condition, and the stability in the low speed operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.212-212
• /
• 2000

This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

• Electronics and Telecommunications Trends
• /
• v.35 no.5
• /
• pp.57-68
• /
• 2020

This paper reviews the recent trends in optical access technologies and their future directions. As the number of hyper-connected, ultra-low-latency, and hyper-realistic services increases, the wireless path has become shorter and the optical access network has become deeply penetrated into the end user. The optical access network continues to evolve through endless innovation via high-speed, ultra-low-latency, and abstraction/virtualization technologies.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1228-1229
• /
• 2011

A novel approach has been promoted for FNN ship controllers. An Electro-hydraulic governor has been widely adopted to the ship speed control of propulsion marine diesel engines for a long time, it was very difficult for Electro-hydraulic governor to regulate the speed of high power engine with long stroke at low speed and low load, because of the jiggling phenomena by rough fluctuation of rotating torque and the hunting phenomena by long dead time occurred in fuel combustion process in the engine cylinder. This paper provides an efficient way for improving control performance by FNN controller. An RBF neural network and GA optimization are employed in a fuzzy neural controller to deal with the nonlinearity, time varying and uncertain factors, the rule base and membership functions can be auto-adjusted by GA optimization. The parameters of neural network can be decreased by using union-rule configuration in the hidden layer of the network. The performance of controller is evaluated by the system simulation using simulink tools.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2015

In this paper, we suggested a RS485 based CSMA/CD protocol that is available in low speed multi-node networks such as industry control communication network and home network etc. The suggested protocol was compared to widely used Master-Slave protocol, Modbus. We modeled realistic control network and showed that the average delay and throughput performance were significantly improved in the different transmission rates.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.150-154
• /
• 2011

The technology to build high speed network using low cost DSL in the areas where the cost to build high speed network is high and the network environment is not very accommodating is important in providing the high speed network that meets the user demand and utilizing the network resources in an efficient way. This study presents development of the link aggregation equipment that performs the access control and firewall functions for packet processing based LAN users. The equipments developed support up to 5 line link aggregation as opposed to current 2 line link aggregation. The equipments also allow the use of high speed network in the areas where the network environment is not very accommodating. Also, the fail-over function is added to each line to provide reliability and the self-security function is enhanced to protect the network from unauthorized use and prevents waste of network resources by authorized users.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.447-448
• /
• 2015

This paper proposes a new dynamic wavelength allocation algorithm for TWDM PON (time and wavelength division multiplexed passive optical network) which comprises of multiple ONUs (optical network units) which have low-speed wavelength tuner. The wavelength tuner requires large amount of frame times to tune its wavelength. An OLT (optical line termination) performs a dynamic bandwidth allocation after the wavelengths of ONUs are determined.