• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.398-405
• /
• 2001

The maximum and mean indicated pressure of two stroke low speed diesel engine has been continuously increased with a view of increasing engine power and also reducing fuel consumption. As a result, axial excitation has been increased comparing to that of the previous one. So the axial vibration damper in standard one is applied to all two stroke low speed diesel engine at the free end of crankshaft. Though many studies were carried out for marine use, few has been made for diesel power plant because there was little demand for power plant. Nowadays, diesel engine is much to be used for many benefits. In this paper, the optimum design of axial vibration on the 65 kW diesel power plant with tow 9K80MC-S engines of 9 cylinders was carried out. And the axial-torsional coupled vibration of this shafting system is identified by theoretical analysis and vibration measurement.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.283-286
• /
• 1999

A 2㎓, low noise, low power CMOS voltage-controlled oscillator (VCO) with an integrated LC resonator is presented. The design of VCO relies heavily on the on-chip spiral inductor. An optimized spiral inductor with Q-factor of nearly 8 is achieved and used for the VCO. The simulated result of phase noise is as low as -l14 ㏈c/Hz at an offset frequency of a 600KHz from a 2㎓ carrier frequency. The VCO is tuned with standard available junction capacitors, resulting in an about 400MHz tuning range (20%). Implemented in a five-metal 0.25${\mu}{\textrm}{m}$ standard CMOS process, the VCO consumes only 2㎽ from a single 2.5V supply. It occupies an active area of 620${\mu}{\textrm}{m}$$\times$720${\mu}{\textrm}{m}$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1382-1387
• /
• 2010

Recently, there has been a growing interest in the environmental conservation. Accordingly, problems related to the audible noise of transformers have became more frequent. Therefore, it is urgent to find a fundamental solution about the audible noises in the substations. This paper described a sort of fundamental solution to solve the noise problem. As a fundamental solution, we suggested the proper audible noise level of transformers through noise prediction in the substation construction phase. And we applied the low noise transformers which have the predicted noise level. As the result, we are able to satisfy the noise regulation through measuring 43.6dBA at the boundary of substation. It is confirmed that the average error rate of prediction was within 3 percent.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.452-459
• /
• 1997

For computer aided design and construction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.554-558
• /
• 2004

In this paper, we introduce noise prediction program of HVAC system to assist low-noisy design of ship's cabin. The developed program calculates sound power levels at HVAC components considering primary and secondary noise generated by fan and duct element, duct element noise attenuation, and duct break-in noise based on the authentic empirical method suggested by NEBB and acoustic power balancing method. Sound pressure level at cabin with or without ceiling system is evaluated by the diffuse-field theory considering diffuser and duct break-out sound powers. Moreover, the program provides intuitive pre- and post-processors using modem GUI functions to help efficient modeling and evaluation of cabin and HVAC component noise. To validate the accuracy and convenience of the program, noise prediction for a HVAC system is demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.920-927
• /
• 1994

A development of an efficient 14.0~14.5GHz 3 Watt SSPA is described in this paper, which is applicable to the very small aperture terminal(VSAT) for bidirectional data and voice signal transmission in low cost and with small size. The SSPA consists of two stages of low noise amplifiers using the low noise GaAs FETs. two stages of medium power amplifiers using the medium power GaAs FETs, and three stages of power amplifiers including a balanced amplifier using an internally matched power GaAs FET. The achieved with this seven stage amplifiers are 42dB signal power gain, 7dB noise figure, 35dBm output power at 1dB gain compression point and 2.0 and 1.5 input and output VSWR respectively.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.129-132
• /
• 2000

In this paper, a 1.8㎓ low noise amplifier was designed and simulated using 0.2$\mu\textrm{m}$ Si CMOS process. Noise characteristics and s parameters were extracted for the 300$\mu\textrm{m}$ gate width and 0.25$\mu\textrm{m}$ gate length NMOS transistors. For high available power gain, each stage was designed cascode type. It revealed available power gain of 23.5dB, noise figure of 2.0dB, power consumption of 15㎽ at 2.5V. It was shown that designed low noise amplifier had good RF performance. Designed Si CMOS LNA is expected to be used for RF front-end in transceiver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.156-159
• /
• 2009

Speckle noise reduction for 3D power doppler ventricle coherent image for restoration and enhancement using wavelet packet transform with separated thresholding is presented. Wavelet Packet Transform divide into low frequency component image to high frequency component image to be multi-resolved. speckle noise is located on high frequency component in multiresolution image mainly. A ventricle image is transformed and inversed with separated threshold function from low to high resolved images for restoration to be utilize visualization for ventricle diagnosis. The experimental result shows that the proposed method has better performance in comparison with the conventional method.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.381-384
• /
• 2000

In this paper, we designed and fabricated a low noise amplifier which can be used in W-CDMA. For improving input VSWR and stability an emitter inductance series feedback was used, and for acquiring higer linearity at low current DC bais by-passing method was used. Fabricated low noise amplifier had 15.33 ㏈ power gain, 2.17 ㏈ NF, -9.53 ㏈ $S_{11}$ and -35.91 ㏈ $S_{22}$ at 2.16 GHz, and +5.34 ㏈m II $P_{ 3}$ at 10 MHz channel spacing.g.g.g.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1343-1348
• /
• 2014

The low frequency noise in Silicon Nanowire Field Effect Transistors is analyzed by characterizing the gate electrode dependence on various geometrical parameters. It shows that gate electrodes have a strong impact in the flicker noise of Silicon Nanowire Field effect transistors. Optimization of gate electrode was done by comparing different performance metrics such a DIBL, SS, $I_{on}/I_{off}$ and fringing capacitance using TCAD simulations. Molybdenum based gate electrode showed significant improvement in terms of high drive current, Low DIBL and high $I_{on}/I_{off}$. The noise power sepctral density is reduced by characterizing the device at higher frequencies. Silicon Nanowire with Si3N4 spacer decreases the drain current spectral density which interms reduces the fringing fields there by decreasing the flicker noise.