• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.76-80
• /
• 2012

Uni-element preburners using a oxidizer-rich triplex injector have been designed and tested. During combustion tests 1L mode high-frequency instability of 1100 Hz and low-frequency instability of 100 Hz were observed. High-frequency instability has been suppressed by reducing chamber diameter and applying turbulent rings in combustion chamber. Recently, research to reduce low-frequency instability is in progress.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.957-965
• /
• 2013

This paper deals with analytical methods for low frequency and high frequency brake squeal noise on brake-rear caliper. In order to improve low frequency and high frequency squeal noise, we take survey caliper bracket shape parameters and housing shape parameters. Besides, using the combination of bracket and housing parameter were surveyed. Thus, using the combination of bracket Alt_05 and housing Alt_45 specifications, instability analysis and brake dynamo test were carried out. Based upon the two models, low and high frequency squeal noise of base model were improved. But, for 6.0 kHz frequency noise, which is not improved, it needs to additionally study on instability analysis and combination of the other brake components.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.88-93
• /
• 2020

Based on the capture-emission energy (CEE) maps of CMOS devices, a physics-informed machine learning model for the bias temperature instability (BTI)-induced threshold voltage shifts and low frequency noise is presented. In order to incorporate physics theories into the machine learning model, the integration of artificial neural network (IANN) is employed for the computation of the threshold voltage shifts and low frequency noise. The model combines the computational efficiency of IANN with the optimal estimation of Gaussian mixture model (GMM) with soft clustering. It enables full lifetime prediction of BTI under various stress and recovery conditions and provides accurate prediction of the dynamic behavior of the original measured data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.573-580
• /
• 2021

Paraffin wax is attracting many attentions for promising solid fuel of hybrid rocket because of its higher regression than other fuels. However, even with paraffin fuel combustion, unsteady low-frequency oscillation of combustion pressure is still observed. And, this is related to the formation of liquid layer and the entrainment of fuel droplets entering the axial combustion gas flow. This study investigates the effect of additional combustion of fuel droplets on the occurrence of low-frequency combustion instability. On the other hand, the formation of fuel droplets depends on Weber Number (the ratio of the inertial force to the surface tension of the liquid) and Reynolds Number of the oxidizer flow. Therefore, a laboratory-scale hybrid rocket was used to monitor the occurrence of combustion instability while changing We number. A series of combustion tests were conducted to control We number by changing the oxidizer flow rate or adding LDPE (low density polyethylene) to base fuel. In the results, it was confirmed that there is a critical We number above which the low-frequency combustion instability occurs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1545-1551
• /
• 2015

Purpose: Rectal cancers with high microsatellite-instable have clinical and pathological features that differentiate them from microsatellite-stable or low-frequency carcinomas, which was studied rarely in stage II rectal cancer, promoting the present investigation of the usefulness of microsatellite-instability status as a predictor of the benefit of adjuvant chemotherapy with fluorouracil in stage II rectal cancer. Patients and Methods: Data of 460 patients who underwent primary anterior resection with a double stapling technique for rectal carcinoma at a single institution from 2008 to 2012 were retrospectively collected. All patients experienced a total mesorectal excision (TME) operation. Survival analysis were analyzed using the Cox regression method. Results: Five-year rate of disease-free survival (DFS) was noted in 390 (84.8%) of 460 patients with stage II rectal cancer. Of 460 tissue specimens, 97 (21.1%) exhibited high-frequency microsatellite instability. Median age of the patients was 65 (50-71) and 185 (40.2%) were male. After univariate and multivariate analysis, microsatellite instability (p= 0.001), female sex (p<0.05) and fluorouracil-based adjuvant chemotherapy (p<0.001), the 3 factors were attributed to a favorable survival status independently. Among 201 patients who did not receive adjuvant chemotherapy, those cancers displaying high-frequency microsatellite instability had a better 5-year rate of DFS than tumors exhibiting microsatellite stability or low-frequency instability (HR, 13.61 [95% CI, 1.88 to 99.28]; p= 0.010), while in 259 patients who received adjuvant chemotherapy, there was no DFS difference between the two groups (p= 0.145). Furthermore, patients exhibiting microsatellite stability or low-frequency instability who received adjuvant chemotherapy had a better 5-year rate of DFS than patients did not (HR, 5.16 [95% CI, 2.90 to 9.18]; p<0.001), while patients exhibiting high-frequency microsatellite instability were not connected with increased DFS (p= 0.696). It was implied that female patients had better survival than male. Conclusion: Survival status after anterior resection of rectal carcinoma is related to the microsatellite instability status, adjuvant chemotherapy and gender. Fluorouracil-based adjuvant chemotherapy benefits patients of stage II rectal cancer with microsatellite-stable or low microsatellite-instable, but not those with high microsatellite-instable. Additionally, free of adjuvant chemotherapy, carcinomas with high microsatellite-instable have a better 5-year rate of DFS than those with microsatellite-stable or low microsatellite-instable, and female patients have a better survival as well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.483-488
• /
• 2003

Frictional heating in brakes causes thermoelastic distortion of the contacting bodies and hence affects the contact pressure distribution. The resulting thermo-mechanical coupling can cause thermoelastic instability (TEI) if the sliding speed is sufficiently high, leading to non-uniform heating called hot spots and low frequency vibration known as hot judder. The vibration of brakes to the known phenomenon of frictionally-excited thermoelastic instability is estimated studying the interface temperature and pressure evolution with time. A simple model has been considered where a layer with half-thickness ${\alpha}$ slides with speed V between two half-planes which are rigid and non-conducting. The advantage of this properly simple model permits us to deduce analytically the critical conditions for the onset of instability, which is the relation between the critical speed and the growth rate of the interface temperature and pressure. Symmetrical component of pressure and temperature distribution at the layer interfaces can be more unstable than antisymmetrical component. As the thickness ${\alpha}$ reduces, the system becomes more apt to thermoelastic instability. Moreover, the evolution of the system beyond the critical conditions has shown that even if low frequency perturbations are associated with low critical speed, it might be less critical than high frequency perturbations if the working sliding speed is much larger than the actual critical speed of the system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.139-146
• /
• 2021

In hybrid rocket combustion, the oxidizer swirl injection is frequently used to stabilize the combustion as the rotational velocity component affects the boundary layer flow. However, as the swirl strength increases, a problem arises where the combustion performance changes too much. Thus, this study attempts to control the low frequency instability while minimizing the change in combustion performance by adapting attenuated swirl injection with fuel insert used in reference [7]. To this end, a series of experimental tests were performed by varying swirl intensity and the location of the fuel insert. In the tests, the occurrence of combustion instability and combustion performance were closely monitored. The results confirmed that combustion instability was successfully suppressed at the condition of the swirl angle 6 degree and the location of fuel insert 310 mm. And, the changes in combustion pressure, O/F ratio, and fuel regression rate were found as minimal compared to the baseline case. Also the results reconfirmed that the formation of positive coupling between two high frequency oscillations in 500 Hz band, combustion pressure(p') and heat release oscillation(q'), is the necessary and sufficient condition of the occurrence of low frequency instability.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.424-427
• /
• 2008

The longitudinal instability (POGO) of the rocket should not be occurred during the whole flight time for the large class liquid propulsion system to complete a mission successfully. The longitudinal instability is caused by the resonance between the propulsion system and rocket structure in the low frequency range below 50Hz, ordinarily. We can consider various types of propulsion system in the early stage of rocket development. So the longitudinal instability analysis tool is needed for corresponding to each propulsion system. This article deals the generalized method applied to the analysis on the low frequency dynamic characteristics of various types of liquid propulsion system.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1246-1257
• /
• 2004

The objective of this paper is to characterize dynamic pressure traces measured at self-excited combustion instabilities occurring in two combustion systems of different hardware. One system is a model lean premixed gas turbine combustor and the other a fullscale bipropellant liquid rocket thrust chamber. It is commonly observed in both systems that low frequency waves at around 300㎐ are first excited at the onset of combustion instabilities and after a short duration, the instability mode becomes coupled to the resonant acoustic modes of the combustion chamber, the first longitudinal mode for the lean premixed combustor and the first tangential mode for the rocket thrust chamber. Low frequency waves seem to get excited at first since flame shows the higher heat release response on the lower frequency perturbations with the smaller phase differences between heat release and pressure fluctuations. Nonlinear time series analysis of pressure traces reveals that even stable combustion might have chaotic behavior with the positive maximum Lyapunov exponent. Also, pressure fluctuations under combustion instabilities reach a limit cycle or quasi-periodic oscillations at the very similar run conditions, which manifest that a self-excited high frequency instability has strong nonlinear characteristics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.1
• /
• pp.50-55
• /
• 2004

In this study, slit-tones by plane impinging jet are investigated experimentally over the whole subsonic flow range, especially at low speeds, in order to obtain the instability behaviour of impinging plane jet. Slit-tones are generated at low speeds associated with laminar shear layer instability as well as at high speeds associated with turbulent instability. Most of low-speed slit-tones are induced by symmetric mode instability unless the slit is not so wide, in which case antisymmetric modes are induced like edge-tones. It is found that the frequencies at low speeds ate controled by the unstable condition of the vortex at the nozzle exit and its pairings by which the frequencies are decreased by half. In the case of symmetric modes related with low-speed slit-tones, frequencies lower than those associated with one-step pairings are not found.