• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.104-113
• /
• 2013

A high-throughput Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoder architecture is proposed for 60GHz multi-gigabit wireless personal area network (WPAN) applications. Two novel techniques which can apply to our selected QC-LDPC code are proposed, including a four block-parallel layered decoding technique and fixed wire network. Two-stage pipelining and four block-parallel layered decoding techniques are used to improve the clock speed and decoding throughput. Also, the fixed wire network is proposed to simplify the switch network. A 672-bit, rate-1/2 QC-LDPC decoder architecture has been designed and implemented using 90-nm CMOS standard cell technology. Synthesis results show that the proposed QC-LDPC decoder requires a 794K gate and can operate at 290 MHz to achieve a data throughput of 3.9 Gbps with a maximum of 12 iterations, which meet the requirement of 60 GHz WPAN applications.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.3
• /
• pp.51-56
• /
• 2005

To improve the BER of OFDM on a fading channel, a low-density parity check coded OFDM system is proposed in this paper. LDPC codes are decoded with Sum-Product or Belief Propagation Algorithm known by probability propagation algorithm. When LDPC codes are applied to OFDM system, the BER performance is dependant on the iteration number of decoding. To improve the spectral efficiency, multi-level modulations are used in mobile communication system. But, It is not clear how to decode LDPC code used in OFDM with multi-level modulations. In the paper, a decoding algorithm is described for LDPC coded OFDM with MPSK. When use the proposed decoding algorithm, we get the good BER for AWGN and a Fading Channel. Simulation results show that the proposed decoding algorithm is confirmed LDPC coded OFDM with MPSK.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.3-7
• /
• 2017

Holographic data storage system (HDSS) features short access times, high storage capacities, and fast transfer rates, since the data is recorded and read not by lines but by pages within a volume of holographic material. Burst error caused by physical impact on the high density storage system becomes very longer than that of conventional storage systems. This paper proposes an LDPC product code using two LDPC code to resolve burst error. When a total code rate is similar, the performance of two LDPC code having high code rate is better than that of one LDPC code having low code rate. Also, with error factors of two-dimensional intersysbol interference and misalignment, the proposed scheme can improve the performance in holographic data storage system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.402-406
• /
• 2005

A multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM) system using low-density parity-check (LDPC) code and iterative decoding is presented. The iterative decoding is performed by combining the zero-forcing technique and LDPC decoding through the use of the 'turbo principle.' The proposed system is shown to be effective with high order modulation and outperforms the space frequency block code (SFBC) method with iterative decoding.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.51-59
• /
• 2004

We design multilevel coding(MLC) with a semi bit-interleaved coded modulation(BICM) scheme based on low density parity check(LDPC) codes. Different from traditional designs, we joint the MLC and BICM together by using the Gray mapping, which can transmit the multimedia data over several equivalent channels with different code rates. To get a good performance from signal-to-noise ratio(SNR) very close to the capacity of the additive white Gaussian noise(AWGN) channel, random regular LDPC code and a simple semi-algebra LDPC(SA-LDPC) code are discussed in MLC with parallel independent decoding(PID). Finally, the numerical results demonstrate that the proposed scheme could achieve both power and bandwidth efficiency for multimedia communication system.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.99-102
• /
• 2002

In this work, we evaluated the performance of soft iterative decoder with soft block decoder in optical storage system. Because optical storage system requires run- length limited code in general, adaptation of the soft decoders such as turbo code or LDPC(low density parity check code) is difficult without soft block decoders. The performance of the overall optical detection system is evaluated and the simplified channel detection is also proposed.

• Information and Communications Magazine
• /
• v.18 no.6
• /
• pp.74-91
• /
• 2001

본 고에서는 통신 시스템에 응용되고 있는 블록부호에 대한 소개와, IMT-2000 시스템의 표준화에서 채널 부호화 기법으로 규격에 반영된 길쌈부호(Convolutional code) 및 터보부호(Turbo code)에 대하여 소개하고, 현재 3세대 이동통신 표준화에서 논의중인 Hybrid ARQ(Adaptive Modulation and Coding), AMC(Adaptive Modulation and Coding) 기술에 대하여 설명한다. 그리고, 고속의 데이터 전송을 요하는 4세대 이동통신 시스템의 채널 부호화 기술로 현재 활발히 연구가 이루어지고 있는 Space-Time Code 및 LDPC(Low Density Parity Check Code)에 대해 소개하고, 차세대 이동통신 시스템의 채널 부호화 기술 전반에 대하여 전망한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.22-30
• /
• 2011

In this paper, we propose a memory efficient multi-rate Low Density Parity Check (LDPC) decoder for China Mobile Multimedia Broadcasting (CMMB). We find the best trade-off between the performance and the circuit area by designing a partially parallel decoder which is capable of passing multiple messages in parallel. By designing an efficient address generation unit (AGU) with an index matrix, we could reduce both the amount of memory requirement and the complexity of computation. The proposed regular LDPC decoder was designed in Verilog HDL and was synthesized by Synopsys' Design Compiler using Chartered $0.18{\mu}m$ CMOS cell library. The synthesized design has the gate size of 455K (in NAND2). For the two code rates supported by CMMB, the rate-1/2 decoder has a throughput of 14.32 Mbps, and the rate-3/4 decoder has a throughput of 26.97 Mbps. Compared with a conventional LDPC for CMMB, our proposed design requires only 0.39% of the memory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.216-225
• /
• 2007

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to bits using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and implement hardware due to exponential and log calculation. therefore this paper presents Euclidean, MAX and Sector method to reduce the high complexity of LLR method. We propose optimal bit splitting method for three iterative codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.219-228
• /
• 2010

In this paper, performance of RS (Reed-Solomon), turbo and LDPC (low density parity check) code in the binary symmetric erasure channel is investigated. When the average erasure length is reduced, the frequency of short erasures is increased. The RS code shows serious performance degradation in such an environment since decoding is carried out symbol-by-symbol. As the erasure length is increased, however, the RS code shows much improved en-or performance. On the other hand, the message and corresponding parity symbols of the turbo code can be erased at the same time for the long erasures. Accordingly, iterative decoding of the turbo code can not improve error performance any more for such a long erasure. The LDPC code shows little difference in error performance with respect to the variation of the average erasure length due to the virtual interleaving effect. As a result, the LDPC code has much better erasure decoding performance than the RS and turbo code.