• 제목/요약/키워드: Low C/N Ratio

검색결과 563건 처리시간 0.026초

Nylon 6-Polyester 조성비에 따른 분할사의 알칼리 분해거동과 물성 변화 (The Mechanical Properties and Alkali Hydrolysis on Composition Ratio of Nylon 6-Polyester Split-type Yarn)

  • 박명수
    • 한국염색가공학회지
    • /
    • 제26권4호
    • /
    • pp.331-338
    • /
    • 2014
  • In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

DHEA 투여로 인한 쥐 간 소포체분획에서의 PUFA/SFA 비율과 지질과산화의 감소 효과 (Effect of DHEA Administration on PUFA/SFA Ratio and Lipid Peroxide in Rat Liver Microsome)

  • 곽충실;김미연
    • Journal of Nutrition and Health
    • /
    • 제38권4호
    • /
    • pp.297-306
    • /
    • 2005
  • It is known that dehydroepiandrosterone (DHEA) shows a dual effect, prooxidant or antioxidant, depending on the do-sage or physiological status of animals. The purpose of this study was to determine the effects of DHEA administration at low dose on lipid peroxidation, protein carbonylation and fatty acid composition in liver. Sprague Dawley male rats were fed either com oil diet containing $15\%$ com oil or fish oil diet containing $2\%$ corn oil + $13\%$ sardine oil, with or without $0.2\%$ DHEA for 9 weeks. Atherogenic index and hepatic triglyceride and cholesterol levels were significantly reduced by DHEA administration in rats fed with fish oil diet. Hepatic lipid peroxide product (TBARS) and protein carbonyl levels were significantly higher in rats fed with fish oil diet than in rats fed with corn oil diet. However, DHEA administration significantly reduced the hepatic thiobarbituric acid-reactive substance (TBARS) and conjugated diene levels in rats fed with fish oil diet. Contents of C16 : 0, C16 : 1, C20 : 5 and C22 : 6 in hepatic microsome were higher in rats fed with fish oil diet than in rats fed with corn oil diet, and contents of C18 : 2 and C20 : 4 were lower than in rats fed with com oil diet. DHEA administration significantly increased C16 : 0 and C18 : 3 contents and reduced C18 : 2 content in rats fed with com oil diet, while it increased C16 : 0 and C18 : 1 and reduced C20 : 5 and C22 : 6 in rats fed with fish oil diet. On overall, DHEA administration increased saturated fatty acid (SFA) and reduced polyunsaturated fatty acid (PUFA) in hepatic microsome, thereby PUFA/SFA ratio was significantly (p < 0.0001) reduced without the change of n-3/n-6 ratio. Taken together, low dose of DHEA administration lowered PUFA/SFA ratio in hepatic microsomal membranes and also showed antioxidative effect especially in fish oil-induced highly oxidative stress condition through blocking increases of C20 : 5 and C22 : 6 contents.

Rhodotorula sp. 의 균체유지 생산에 미치는 탄소원과 실소원 농도의 영향 (Effect of Carbon and Nitrogen concentration on Lipid production by Rhodotorula sp.)

  • 김진원;강신권;성낙계
    • 한국미생물·생명공학회지
    • /
    • 제12권4호
    • /
    • pp.271-276
    • /
    • 1984
  • 배양액 중에 탄소원과 질소원의 농도를 조절하여 C/N 비가 Rhodotorula sp.의 균체생육과 지질생성에 미치는 영향을 조사하고 생성된 지질의 지방산조성을 분석하여 다음과 같은 결과를 얻었다. 배양액의 질소농도가 높을수록 균체지방 함량은 감소하고 대신 단백질 함량이 증가하며 질소가 과소할 경우에는 지질 함량은 높으나 균체 생육이 부진하였다. 지질생산의 최적 C/N 비는 45∼50 (48) 이었으며 질소의 기준량은 질소동화율(Nitrogen digestion rate)과 밀접한 관계가 있었다. 생육 과정에서 체단백질의 합성과 지질의 집중적인 축적간에는 시간적인 구분 현상이 뚜렷하여 단백질은 배양초기에 주로 합성되고 지질은 중반 이후에 집중적으로 합성 축적되었다. 그리고 총지방산의 함량은 지질생성량이 가장 많은 조건, 즉 최적 C/N 비에서 가장 높았다. C/N 비가 증가할수록 포화지방산의 함량이 증가하고 불포화지방산의 함량은 감소하였으며 이것은 주로 palnitic acid와 oleic acid사이의 상호 증감에 기인되는 것이었다.

  • PDF

톱밥, 볏짚, 왕겨 및 신문지를 이용한 돈분의 퇴비화 (Composting of Swine Feces Using Sawdust, Rice Straw Rice Hull or Newspaper as a Bulking Material)

  • 최경호;박석환;정문식
    • 한국환경보건학회지
    • /
    • 제21권1호
    • /
    • pp.56-67
    • /
    • 1995
  • This study was carried out to observe how composting reaction proceed in the optimum composting condition and to understand the characteristics of final compost, when swine feces was amended with different bulking material. Sawdust, rice straw, and rice hull were selected as bulking materials and each of these was mixed with swine feces to obtain the optimum range of moisture contents and C:N ratio. To grasp the influence of newspaper on cornposting reaction when it flew into the composting site intentionally or accidentally, another composting reaction using newspaper as a bulking material was studied. In this experiment, raw material mixes containing the same amount of organic materials were put into 4 composting reactors and composted in the same environmental condition for 3 weeks from Aug. 1, 1994 to Aug. 22, 1994. The followings are the main results of this study. 1. The maximum temperatures reached at during cornposting reaction were 53.8$\circ$C, 51.9$\circ$C, 52.7$\circ$C, and 52.1$\circ$C in the reactor using sawdust, rice straw, rice hull, and newspaper as a bulking material respectively: Thermophilic temperatures were maintained for 72, 108, 108, and 111 hours in each reactor. Mean temperatures of reactors using sawdust, rice straw, rice hull, or newspaper as a bulking materials were 39.7$\circ$C, 39.5$\circ$C, 41.3$\circ$C, and 40.3$\circ$C, but no significant difference between these mean temperatures was observed(p>0.05). Each composter showed significant difference from room temperature(p<0.01), and the mean difference between them was 9.4$\circ$C. 2. Ash contents of each reactor increased rapidly in order of rice straw, rice hull, newspaper, and sawdust according to the pattern of second order function. This rate of increase seemed to result from structural characteristics of a bulking material. The absolute values of second order coefficient of these regression functions were 0.0199, 0.0159, 0.0157, and 0.0144 in each reactor using rice straw, rice hull, newspaper, or sawdust as a bulking material. 3. C:N ratio decreased as the reaction proceeded. Degree of decrease was in order of rice straw, rice hull, newspaper, and sawdust. This sequence was consistent with the increase rate of ash content. The ratios of initial C:N ratio to final C:N ratio were 0.45, 0.53, 0.64, and 0.75 in each reactor using rice straw, rice hull, newspaper, and sawdust as a bulking material respectively. From this ratios, it was possible to infer that all the composting reactions were completed. 4. Fertilizer content containing in the final compost was 1.61~2.20% of N, and 0.35~0.54% of P in dry weight base. According to the classification standard for compost constituent by Higgins, all composts had the intermediate grade of N, but below the low grade of P excepting the newspaper amended compost(fall into the range of the low grade). 5. Heavy metal contents contained in the composts were analyzed. In case of Cd, the range of 0.58~1.11 $\mu$g/g was observed, and in case of Pb, the range of 24.76~39.53 $\mu$g/g was observed(in wet weight base). These values are below the permissible heavy metal level for compost of foreign countries.

  • PDF

Biofilter 공정에서 유입 C/N비와 DO가 지하수의 질산성 질소제거에 미치는 영향 (Effect of Influent C/N Ratio and DO on Denitrification of Nitrate Polluted Groundwater in a Biofilter Process)

  • 이무재;박상민;박노백;전항배;김공수
    • 대한환경공학회지
    • /
    • 제28권4호
    • /
    • pp.355-361
    • /
    • 2006
  • 고정상 생물여과지(biofiiter)에서 유입 C/N(COD/Nitrate)비와 용존산소(DO) 농도가 지하수로부터 질산성 질소를 제거하는데 미치는 영향을 관찰하였다. 유입 C/N비 10과 4.0에서 30 mg/L로 유입된 질산성 질소는 생물학적 탈질반응에 의해 완전히 제거되었다. 반면, 유입 C/N비 2.0에서는 전자공여체가 부족하였기 때문에 5.0 mg/L의 질산성 질소가 유출되었다. 게다가, 유입 C/N비가 2로 감소함에 따라 5.0 mg/L에 달하는 아질산성 질소가 발생하였다. 유입 C/N비 5에서 DO 농도의 증가는 탈질반응을 저해하였으며, 질산성 질소제거효율을 감소시켰다. 아황산나트륨($Na_2SO_3$)을 이용하여 유입 DO농도를 조절할 경우, 0.3 mg/L의 낮은 DO에도 불구하고 유출수 중 3.6 mg/L의 아질산성 질소가 잔류하였다. 반면, 질소가스를 이용하여 DO농도를 0.3 mg/L로 조절한 경우, 유입된 질산성 질소는 완전히 제거되었으며, 아질산성 질소는 검출되지 않았다. 생물여과지에서 유입된 질산성 질소를 제거하는데 소비된 유기물은 $3.0{\sim}3.5gSCOD/g{NO_3}^--N$의 범위이었으나, DO 농도가 5.5 mg/L로 증가함에 따라 소비된 그 양은 증가하였다. 높은 DO 농도 및 낮은 유입 C/N비와 함께 아황산나트륨을 이용한 DO 농도 조절은 생물학적 탈질반응에 영향을 주었으며, 질산성 질소제거효율을 감소시키고 아질산성 질소가 축적되었다.

플라즈마 실리콘 OXYNITRIDE막의 구조적 특성에 관한 고찰 (A Study on the Structure Properties of Plasma Silicon Oxynitride Film)

  • 성영권;이철진;최복길
    • 대한전기학회논문지
    • /
    • 제41권5호
    • /
    • pp.483-491
    • /
    • 1992
  • Plasma silicon oxynitride film has been applied as a final passivation layer for semiconductor devices, because it has high resistance to humidity and prevents from alkali ion's penetration, and has low film stress. Structure properties of plasma silicon oxynitride film have been studied experimentally by the use of FT-IR, AES, stress gauge and ellipsometry. In this experiment,Si-N bonds increase as NS12TO/(NS12TO+NHS13T) gas ratio increases. Peaks of Si-N bond, Si-H bond and N-H bond were shifted to high wavenumber according to NS12TO/(NS12TO+NHS13T) gas ratio increase. Absorption peaks of Si-H bond were decreased by furnace anneal at 90$0^{\circ}C$. The atomic composition of film represents that oxygen atoms increase as NS12TO/(NS12TO+NHS13T) gas ratio increases, to the contrary, nitrogen atoms decrease.

  • PDF

304L 스테인리스 강의 플라즈마 질화처리 (Plasma Assisted Nitriding of Stainless Steel Type 304L)

  • 박정렬
    • 열처리공학회지
    • /
    • 제8권4호
    • /
    • pp.255-265
    • /
    • 1995
  • Stainless steel type 304L has been nitrided in the low pressure (600Pa) and high nitrogen (80% $N_2$+20% $H_2$) environment for 5 hours by the square-wave-pulsed-d.c. plasma as a function of temperature $400{\sim}550^{\circ}C$ and pulsation. At the lower temperature range of $400{\sim}500^{\circ}C$ and at the relatively high ratio of pulse duration to pulse period. "S-phase" has been developed in the form of thin nitrided surface layer which has many cracks, leading to be nearly impossible for the industrial anti-wear and anti-corrosion applications. At the higher temperature up to $550^{\circ}C$ with the increasing ratio of the pulse duration to pulse period up to $50{\mu}s/100{\mu}s$, the nitrided layer, whose growth rate has increased also, has been composed mainly of CrN and $Fe_4N$ phases and has become thick, uniform and nearly crack-free.

  • PDF

부분질산화와 혐기성 암모늄산화를 이용한 돈사폐수처리 (Piggery Waste Treatment using Partial Nitritation and Anaerobic Ammonium Oxidation)

  • 황인수;민경석;이영옥
    • 한국물환경학회지
    • /
    • 제22권4호
    • /
    • pp.599-604
    • /
    • 2006
  • Nitrogen removal with the combined SHARON (Single reactor system for high ammonium removal over nitrite)ANAMMOX (Anaerobic ammonium oxidation) process using the effluent of ADEPT (Anaerobic digestion elutriated phased treatment) slurry reactor with very low C/N ratio for piggery waste treatment was investigated. For the preceding SHARON reactor, ammonium nitrogen loading and removal rate were $0.97kg\;NH_4-N/m^3_{reactor}/day$ and $0.68kg\;NH_4-N/m^3_{reactor}/day$ respectively. In steady state, bicarbonate alkalinity consumption for ammonium nitrogen converted to $NO_2-N$ or $NO_3-N$ was 8.4 gram per gram ammonium nitrogen. The successive ANAMMOX reactor was fed with the effluent from SHARON reactor. The loading and removal rate of the soluble nitrogen defined as the sum total of $NH_4-N$, $NO_2-N$ and $NO_3-N$ in ANAMMOX reactor were $1.36kg\;soluble\;N/m^3_{reactor}/day$ and $0.7kg\;soluble\;N/m^3_{reactor}/day$, respectively. The average $NO_2-N/NH_4-N$ removal ratio by ANAMMOX was 2.41. Fluorescence in situ hybridization (FISH) analysis verified that Candidatus Kuenenia stuttgartiensis were dominate, which means that they played an important role of nitrogen removal in ANAMMOX reactor.

Arc Ion Plating 방식에 의한 TiCN 증착시 반응가스가 코팅층에 미치는 영향 (The effect of reactive gases on the propertise of TiCN layer synthesized by Arc Ion plating process)

  • 서창민;김창근;;유임준
    • 한국해양공학회지
    • /
    • 제11권3호
    • /
    • pp.56-68
    • /
    • 1997
  • This work was intended to study the effect of a partial pressure ratio and a total pressure of reactive gases on the properties of TiC$_{x}$N$_{1-x}$ . coated layer. In this regard, various TiC$_{x}$N$_{1-x}$ coatings were synthesized with C2112 and N2 Mixture gas of different compositions by Arc Ion Plating process which has been highlighted for an industrial purpose. It was revealed from colors and X-ray diffraction patterns that the concentration of carbon of a TiC$_{x}$N$_{1-x}$ coating increases with a partial pressure ratio (PC$_{2}$H$_{2}$/PN$_{2}$) as well as a total pressure Of $C_{2}$H$_{2}$ and N$_{2}$ mixture gas. Accordingly, the hardness of TiC$_{x}$N$_{1-x}$ coated layer increased but the adhesion to the substrate of SKH 51 was degraded. On the other hand, the deposition rate was independent of a partial pressure ratio and a total pressure of mixture gas. It was found that a uniform gas distribution is critical for an industrial application since the composition of a coating depends strongly on the location of a substrate inside of the furnace. As a result of milling tests with different TiC$_{x}$N$_{1-x}$ coated end mills, the one which has a low carbon concentration was better than others studied in this work.d in this work.

  • PDF

SA516/70 압력용기 강의 저온 피로균열 진전 속도에 미치는 응력비의 영향 (The Effect of Stress Ratio on Fatigue Crack Propagation Rate in SA516/70 Pressure Vessel Steel at Low Temperature)

  • 박경동;김정호;최병국;임만배
    • 한국안전학회지
    • /
    • 제16권1호
    • /
    • pp.18-24
    • /
    • 2001
  • The fatigue crack growth behavior of the SA516/70 steel which is used for pressure vessels was examined experimentally at room temperature, $-60^{\circ}C$,$-80^{\circ}C$ and $-100^{\circ}C$ with stress ratio of R=0.05, 0.1 and 0.3. Fatigue crack propagation rate da/dN related with stress intensity factor range ${\Delta}K$ was influenced by stress ratio in stable of fatigue crack growth (Region II) with an increase in ${\Delta}K$. The resistance of fatigue crack growth at low temperature is higher compared with that at room temperature, which is attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and low temperatures are mainly explained by the crack closure and the strengthening due to the plasticity induced and roughness induced.

  • PDF