• 대한치과보철학회지
• /
• 제56권1호
• /
• pp.17-24
• /
• 2018

가철성 국소의치의 금속구조물을 제작하는 방법은 왁스 패턴을 제작하여 주조하는 lost wax technique이 주로 사용되어 왔으나, 디지털 기술의 발달로 서베잉과 금속구조물을 CAD (Computer aided design)로 디자인하여 제작할 수 있게 되었다. 여러 증례에서 CAD를 이용한 pattern의 프린팅 방식으로 얻은 레진 패턴이 구강 내에 정확하게 적합 되었고 최종 금속구조물 또한 좋은 적합도를 보였다고 보고되었다. 본 원저는 치조골 소실이 심한 상, 하악부분 무치악 환자에서 가철성 국소의치의 금속구조물을 두 가지 방식으로 각각 제작하였다. 첫 번째는 일반적인 lost wax technique과 두 번째는 CAD를 통해 pattern을 프린팅하여 금속구조물을 주조하는 방식으로 제작하여, CAD data와 fit checker를 이용해 금속구조물과 서베이드 크라운과의 유격을 측정함으로써 금속구조물의 적합도를 비교하였다. 두 가지 방식 모두 임상적으로 사용 가능한 금속구조물의 적합도를 얻었기에 이를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제22권3호
• /
• pp.243-250
• /
• 2006

Due to high esthetic demands from patients, we are driven to fabricate natural-looking(form and color) restorations. In the past decade, the glass-ceramic in dentistry has been used as a material with variable crystals that affects the appearance, characteristics, and mechanical properties of metal-free fixed restoration. The conventional IPS Empress glass-ceramic is a heat-pressed, leucite reinforced material using the "lost wax" principle. This glass-ceramic has been successfully used for esthetic restorations such as all-ceramic crowns, inlays/onlays, and veneers for about 15 years. This article presents that the form and surface texture of clinical crown are duplicated by IPS-Empress system using "lost-wax technique".

• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.74-80
• /
• 1999

In this study, a stereolithography apparatus (SLA) prototype is used as a master model to be transformed into the silicone pattern by vacuum tool forming. The tool for the first prototype is fabricated by using this silicone pattern. Following this procedure, a temporary tool with metal powder and epoxy for wax injection is prepared for the die set of quick change type which consists of upper and lower base die나 and an insert die. The die set of quick change type appears to be very effective in casting operation by changing tools rapidly. The original wax pattern is formed through the die set, and is made of lost-was. Finally the lost-wax pattern is applied to investment casting. The final casting product is checked regarding its dimensional accuracy.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.234-239
• /
• 2020

Purpose: We investigated the marginal fit between abutment and metal copings according to impression technique, wax block types, and metal types. Methods: We selected the traditional impression method of using rubber impression materials and the digital impression method of using oral scanners, three types of wax blocks, and two types of metal, both of which were domestically and commercially available, were selected to produce metal copings, and the marginal fit was determined through the use of silicon replication. Results: The measurements of axial wall fit revealed that the IYV specimens had the best fit, with a mean gap of 24.11±5.95 ㎛, followed by CEV, CHV, CSS, CSV, CES, CHS, and IYS specimens (mean: 33.44±8.41 ㎛). The differences were not statistically significant. The marginal gap measurements showed that the CEV specimen had the smallest gap, 17.25±4.13 ㎛, followed by the CSV, CHV, CSS, CES, CHS, IYV, and IYS specimen (mean: 43.47±15.63 ㎛). The differences were statistically significant. Conclusion: The axial wall fit of the metal coping (VeraBond2V; Aalba Dent, Inc., Fairfield, CA, USA) produced by the lost wax technique with the traditional impression method was excellent. The marginal fit of the metal coping (VeraBond 2V) produced by wax milling with the use of an oral scanner was also excellent. The marginal fit of the metal coping was within the clinically acceptable limits in all groups.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

• The Journal of Advanced Prosthodontics
• /
• 제13권5호
• /
• pp.327-332
• /
• 2021

PURPOSE. The purpose of this in vitro study was to evaluate the accuracy of digitally designed removable partial denture (RPD) frameworks, constructed by additive and subtractive methods castable resin patterns, using comparative 3D analysis. MATERIALS AND METHODS. A Kennedy class III mod. 1 educational maxillary model was used in this study. The cast was scanned after modification, and a removable partial denture framework was digitally designed. Twelve frameworks were constructed. Two groups were defined: Group A: six frameworks were milled with castable resin, then casted by the lost wax technique into Co-Cr frameworks; Group B: six frameworks were printed with castable resin, then casted by the lost wax technique into Co-Cr frameworks. Comparative 3D analysis was used to measure the accuracy of the fabricated frameworks using Geomagic Control X software. Student's t-test was used for comparing data. P value ≤ .05 was considered statistically significant. RESULTS. Regarding the accuracy of the occlusal rests, group A (milled) (0.1417 ± 0.0224) showed significantly higher accuracy than group B (printed) (0.02347 ± 0.0221). The same results were found regarding the 3D comparison of the overall accuracy, in which group A (0.1501 ± 0.0205) was significantly more accurate than group B (0.179 ± 0.0137). CONCLUSION. In indirect fabrication techniques, subtractive manufacturing yields more accurate RPDs than additive manufacturing.

• 대한치과기공학회지
• /
• 제40권4호
• /
• pp.209-215
• /
• 2018

Purpose: The purpose of this study was to evaluate the clinical acceptability of the marginal and internal gap of Co-Cr metal copings fabricated with stereolithography (SLA). Methods: Titanium master dies were milled after scanning of the prepared tooth (n=30). For group I, Co-Cr metal copings were made from conventional lost-wax technique(LWT, n=10). For group II, the master dies were scanned and designed with CAD system. Then, metal copings were milled with Co-Cr(SUB, n=10). For group III(ADD, n=10), the scanning and design procedures were same as group II and burn-out resins were fabricated with SLA device. The marginal and internal discrepancies were measured under an optical microscope(100x) on ten reference points and were statistically analyzed with one-way ANOVA(${\alpha}=.05$). Results: The mean total discrepancies were $53.76{\pm}12.42{\mu}m$ in the LWT group and $69.82{\pm}15.48{\mu}m$ in the ADD group. The SUB group showed the largest total mean value $110.33{\pm}13.77{\mu}m$. There was statistically significant difference between the SUB and the other groups(P<0.05). Conclusion : Co-Cr metal copings fabricated with SLA technology showed clinically acceptable value on marginal and internal gap and there was no statistically significant difference between conventional lost-wax technique and SLA.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.118-122
• /
• 1995

The hydraulic or pneumatic valve spools become essential as the important components on the production of automatic hydraulic or pneumatic machinaries as mechanical industry is developed rapidly. The machining precision is asked for manufacturing the valve spools. They could be unstable in the quality by the conventional arc welding and they have a lot of technical problems in manufacturing because their shapes are generally small. By the Precision casting process such as lost wax process, the production cost will be increased. But by the friction welding technique, they will be able to be made without such problems. Furthermore, there is a few study on friction welding of such hydraulic valve spool steels and in-process real-time weld quality evaluation technique by acoustic emission. So that, the final purpose of this study is 1) the development of design and manufacturing technique of hydraulic or pneumatic valve spool by optimizing of friction welding, and 2) the development of in-process real-time weld quality evaluation technique by acoustic emission.

• 대한치과보철학회지
• /
• 제51권1호
• /
• pp.47-51
• /
• 2013

골유착성 임플란트의 등장으로 결손치의 수복이 가능하게 되어 전통적인 고정성 또는 가철성 국소의치가 임플란트로 대체되어가고 있는 추세이다. 특히 젊은 환자의 경우 보철물의 수명과 함께 심미적인 결과를 고려해야 한다. 임플란트는 장기간의 성공적인 치료 결과와 함께 기능적인 회복을 이룰 수 있으나, 치은 퇴축으로 인한 변연부 노출, 치간 유두 상실로 인한 비심미적인 연조직, 금속 지대주, 상부 도재관의 투명도 감소 등은 임플란트 수복 시 정상적인 저작 기능 회복은 이룰 수 있으나 심미적으로는 불리한 결과를 보일 수 있다. 최근 CAD/CAM technology를 이용한 지르코니아는 충분한 강도와 파절 저항성을 가져 정상적인 저작 기능이 가능하고, 뛰어난 굴곡강도로 고정성 보철물, 가철성 의치 보철물에 다양하게 응용되며, 생체 적합성이 뛰어나고, 색조 재현성에서도 금속에 비해 심미적인 결과를 보이며 전치부와 구치부의 보철 치료에 이용되고 있다. 그리고 pressed ceramic technique을 이용한 전부 도재 보철 수복은 기존의 전통적인 도재 축성 과정보다 우수한 파절 저항성을 보인다. Pressed ceramic technique 은 상부의 도재 축성 과정이 왁스업을 통해 용융, 주조 되어 최종 보철물의 형태를 왁스업 단계에서 조절할 수 있는 장점이 있다. 임플란트를 포함한 본 증례의 보철 수복은 임시 보철물의 치경부 형태를 조절하여 심미적인 연조직을 재현하고자 하였고, 임시 보철물의 형태를 왁스업으로 복제하여 원하는 형태의 최종 보철물을 제작하였다. 본 증례에서는 임플란트 치료에 있어서 지르코니아와 pressed ceramic technique을 적용하여 기능적이고 심미적으로 양호한 결과를 얻었다.

• 박물관보존과학
• /
• 제23권
• /
• pp.1-16
• /
• 2020

이 논문에서는 부여 규암리 출토 '금동관음보살입상(국보 제293호, M335번)' 1점을 현미경으로 확대 관찰하여 제작기법을 확인하였고, XRF 성분분석과 Hard X-선 조사로 구성 성분과 불상 표면 처리 방법, 주조법을 확인하였다. 이 불상은 연화대좌 위에 직립하는 보살상이다. 불상 양 측면으로 흘러내린 천의와 대좌에 표현된 연화문의 모양을 볼 때 7세기 이후에 만들어진 불상의 특징을 하고 있다. 대좌 안쪽에서 내형과 외형을 고정시키기 위한 틀잡이와 주물의 주입 흔적이 관찰되었다. 또한, 주조기법은 팔과 대좌 부분에 청동 주물시 형성된 기포가 확인되어 이를 종합해 볼 때 고대 중소형 금동불 제작에 많이 사용되는 밀납주조법으로 제작한 것으로 판단된다. 성분분석 결과, 불상 내부에서는 시기적으로 6~7세기에 많이 나타나는 구리(Cu)-주석(Sn)-납(Pb) 계열의 3원계 합금을 사용한 것으로 확인되며 이는 금속을 합금하여 주조를 쉽게 하고 불상에 표현된 문양 및 장식을 선명하게 표현하고자 하는 의도로 추정된다. 불상 표면에서는 수은(Hg)이 검출되어 금(Au)을 수은(Hg)에 용해시켜 도금하는 방식인 아말감도금기법을 사용했던 것으로 추정되며 이러한 도금방법은 고대 한반도에서 제작된 소형 금동불에서 주로 확인되는 불상의 도금 방식이다.