• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.100-108
• /
• 2006

Experimental study has been a general way to evaluate inlet and exhaust duct performances, but this is not only costly but also time consuming. Computational simulation is hence replacing experimental study and consequently time and cost saving. This paper therefore aims to investigate typical component performance of the intake and exhaust ducts using 3D representation. In this study a specific inlet and exhaust was modeled and analyzed to estimate its losses and flow field using computational fluid dynamic program with flow visualization capabilities. A process that requires geometry data to be modeled. That allowed for possibility of design trade off in designing phase. Installed performance of a specific turbo shaft engine was finally evaluated with the estimated inlet, exhaust and other accessories losses.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.213-220
• /
• 2002

The sound wave in the sea propagates under the effect of water depth, sound velocity structure, sea surface and bottom roughness, and bottom sediment distribution. In particular the sound velocity structure in shallow water varies with time and space, an? the sediment distributes very variedly with place. In order to investigate the seasonal variation of low-frequency sound propagation in the Yellow Sea, the propagation experiments were conducted along the same track in the middle part of the Yellow Sea at various seasons of spring. summer, and autumn. In this paper we consider the measurement results on the propagation loss with the sound velocity structure, and investigate the seasonal variation of the propagation loss. As a result, the propagation losses measured in summer were larger than the losses in spring and autumn. And the propagation losses measured in autumn were smaller than the losses in spring. The seasonal change of the propagation loss increased with the rise of sound frequency and the propagation range.

• Korean Journal of Head & Neck Oncology
• /
• v.14 no.1
• /
• pp.15-19
• /
• 1998

Objectives: It is expected that the combined cisplatin and radiation therapy for nasopharyngeal carcinoma produces more sensory neural hearing losses compared to radiation therapy alone. The purpose of this study was to evaluate the incidence of sensory neural hearing losses after concurrent cisplatin and radiation therapy for nasopharyngeal carcinoma. Materials and Methods: From Jun. 1994 to Mar. 1997, 10 patients were available for this study with the following eligibility criteria: 1) The patients received concurrent cisplatin and radiation therapy for nasopharyngeal carcinoma. 2) There was no pre-existing auditory disease except serous otitis media due to nasopharyngeal carcinoma. 3) They had normal sensorineural hearing function on the pretreatment pure tone audiogram. 4) Pure tone audiograms were performed at least one time after treatment between 6months to 1 year follow-up without local recurrence. Results: At 1 year follow-up, 3 patients complained of decreased hearing capacity. Sensorineural hearing losses were developed in 15 ears out of 20(75%) and were more frequent and severe in high frequency area on pure tone audiogram. Conclusion: The concurrent cisplatin and radiation therapy for nasopharyngeal carcinoma may produce sensorineural hearing losses more frequently compared to historical data of radiation therapy alone and close evaluations with regular audiograms are necessary even in patients without symptoms and signs of hearing impairment.

• The Korean Journal of Applied Statistics
• /
• v.23 no.2
• /
• pp.219-234
• /
• 2010

In index investing according to KOSPI, we estimate Value at Risk(VaR) from the extreme losses of the daily returns which are obtained from KOSPI. To this end, we apply Block Maxima(BM) model which is one of the useful models in the extreme value theory. We also estimate the extremal index to consider the dependency in the occurrence of extreme losses. From the back-testing based on the failure rate method, we can see that the model is adaptable for the VaR estimation. We also compare this model with the GARCH model which is commonly used for the VaR estimation. Back-testing says that there is no meaningful difference between the two models if we assume that the conditional returns follow the t-distribution. However, the estimated VaR based on GARCH model is sensitive to the extreme losses occurred near the epoch of estimation, while that on BM model is not. Thus, estimating the VaR based on GARCH model is preferred for the short-term prediction. However, for the long-term prediction, BM model is better.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1383-1389
• /
• 2011

The current study focuses on the consistent analysis of heat transfer in multichannel volumetric solar receivers used for concentrating solar power. Changes in the properties of the absorbing material and channel dimensions are considered in an optical model based on the Monte Carlo ray-tracing method and in a one-dimensional heat transfer model that includes conduction, convection, and radiation. The optical model results show that most of the solar radiation energy is absorbed within a very small channel length of around 15 mm because of the large length-to-radius ratio. Classification of radiation losses reveals that at low absorptivity, increased reflection losses cause reduction of the receiver efficiency, notwithstanding the decrease in the emission loss. As the average temperature increases because of the large channel radius or small mass flow rate, both emission and reflection losses increase but the effect of emission losses prevails.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.702-713
• /
• 2018

Power loss reduction and total harmonic distortion(THD) minimization are two important goals of improving three-level inverters. In this paper, an optimized pulse width modulation (PWM) strategy that can reduce switching losses and balance the neutral point with an optional THD of three-level neutral-point-clamped inverters is proposed. An analysis of the two-level discontinuous PWM (DPWM) strategy indicates that the optimal goal of the proposed PWM strategy is to reduce switching losses to a minimum without increasing the THD compared to that of traditional SVPWMs. Thus, the analysis of the two-level DPWM strategy is introduced. Through the rational allocation of the zero vector, only two-phase switching devices are active in each sector, and their switching losses can be reduced by one-third compared with those of traditional PWM strategies. A detailed analysis of the impact of small vectors, which correspond to different zero vectors, on the neutral-point potential is conducted, and a hysteresis control method is proposed to balance the neutral point. This method is simple, does not judge the direction of midpoint currents, and can adjust the switching times of devices and the fluctuation of the neutral-point potential by changing the hysteresis loop width. Simulation and experimental results prove the effectiveness and feasibility of the proposed strategy.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.353-362
• /
• 2009

In the process of turbine modernizations, the investigation of the influences of water passage roughness on radial flow machine performance is crucial and validates the efficiency step up between reduced scale model and prototype. This study presents the specific losses per component of a Francis turbine, which are estimated by CFD simulation. Simulations are performed for different water passage surface roughness heights, which represents the equivalent sand grain roughness height. As a result, the boundary layer logarithmic velocity profile still exists for rough walls, but moves closer to the wall. Consequently, the wall friction depends not only on roughness height but also on its shape and distribution. The specific losses are determined by CFD numerical simulations for each component of the prototype, taking into account its own specific sand grain roughness height. The model efficiency step up between reduced scale model and prototype value is finally computed by the assessment of specific losses on prototype and by evaluating specific losses for a reduced scale model with smooth walls. Furthermore, surveys of rough walls of each component were performed during the geometry recovery on the prototype and comparisons are made with experimental data from the EPFL Laboratory for Hydraulic Machines reduced scale model measurements. This study underlines that if rough walls are considered, the CFD approach estimates well the local friction loss coefficient. It is clear that by considering sand grain roughness heights in CFD simulations, its forms a significant part of the global performance estimation. The availability of the efficiency field measurements provides an unique opportunity to assess the CFD method in view of a systematic approach for turbine modernization step up evaluation. Moreover, this paper states that CFD is a very promising tool for future evaluation of turbine performance transposition from the scale model to the prototype.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.123-129
• /
• 2000

We set up a loss measurement apparatus using cavity ring-down method to get the losses in mirror having a small absorption and scattering. The measured errors could be explained by the loss inhomogeneity of the position of the mirror included in the cavity, and we knew that the long~period measurement limit of apparatus is three days, the minimum error limit of Lhe term is 4 ppm, which were gotten by measuring the long-period and short-period decay time in both reference and test cavity. Also we determined the losses m various mirrors fabricated at our laboratory using the apparatus and we found that the losses in mirrors are quite different at their spatial positions. tions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.5
• /
• pp.153-162
• /
• 2001

A study was carried out to investigate the water balance and losses of nutrients at a paddy plot located at the southern Korea. The observed amount of precipitation, irrigation, runoff, evapotranspiration and percolation for the experimental paddy plot during cropping period were 1,030, 566, 701, 551. and 310 mm for 1999 and 1.214, 413, 710, 682, and 234 mm for 2000 year, respectively. The measured input quantities of N and P into the paddy field during cropping period were 122 to 140 kg N $ha^-1$ and 29 to 30 kg $P_2O_5$ kg $ha^-1$ by chemical fertilizer, 20 to 28 kg N $ha^-1$ and 0.35 to 0.36 kg P $ha^-1$ by precipitation, and 26 to 35 kg N $ha^-1$ and 0.57 to 0.72 kg P$ha^-1$ by irrigation water. respectively. The output amounts of N and P from paddy field were measured as follows. They were 48 to 52 kg N $ha^-1$ and 1.1 to 1.6 kg P $ha^-1$by runoff water, and 9 to 12 kg N $ha^-1$ and 0.04 to 0.05 kg $ha^-1$ by percolation water. When the runoff losses of nutrients were compared to applied chemical fertilizer. it was found that 34.3 % to 42.6 % of nitrogen lost via runoff while runoff losses of phosphorus account for 3.8 % to 5.3 % of the total applied amount. When the ratio was calculated between nutrients losses by percolation water and the applied of chemical fertilizer, two year results showed 6.4 % to 9.8 % for the nitrogen and 0.1% to 0.2% phosphorus, respectively.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.95-103
• /
• 2008

Knowledge of expected losses in terms of physical, economic, and social damages due to a potential earthquake will be helpful in the effort to mitigate seismic hazards. In this study, losses due to a magnitude 6.7 scenario earthquake in the Gyeongju area have been estimated using the deterministic method in HAZUS. The attenuation relation proposed by Sadigh et al.(1997) for site classes B, C, and D, which are assumed to represent the characteristics of the strong-motion attenuation in the Korean Peninsula, has been applied. Losses due to the hypothetical earthquake have been also calculated using other attenuation relationships to examine their roles in the loss estimation. The findings indicate differences among the estimates based on various attenuation relationships. Estimated losses of the Gyeongju area by a scenario earthquake using HAZUS should be seriously considered in the planning of disaster response and hazard mitigation.