• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.51-60
• /
• 2004

In this paper, 8-channel multiplexer with 100GHz channel spacing is fabricated. The 8-channel multiplexer is fabricated by connecting three cascaded Mach Zehnder Interferometer (MZI) of optical fiber type, and each interferometer has the wavelength interval of 100GHz, 200GHz and 400GHz, respectively. furthermore, to acquire uniform insertion loss, it is fabricated by using Wavelength Flatten Coupler (WFC) in which the variation of insertion loss is low. Especially, the variation of wavelength interval in the output is explicitly simulated as a function of optical path difference, and the wavelength coupling process along with cascaded connection is discussed. $CO_2$ laser to adjust precisely the wavelength. In summary, The prototype composed by eight cascaded MZI has an insertion loss of 2.1dB, the bandwidth of 0.8nm at 5.5dB point, and channel crosstalk of 25dB Furthermore, the loss dependent on polarization is measured as 0.06dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.757-763
• /
• 2013

This study discusses the multiple knife-edge diffraction loss with the receiver and jammer located in the Seoul metropolitan northwestern region. The considered positioning and jamming signals are the GPS L1 C/A signal and several jamming signals such as the wideband Gaussian noise, matched spectrum, and continuous wave signals. To calculate the accurate diffraction effects, the 3-dimensional topography data at the Seoul metropolitan northwestern region was used.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.17-20
• /
• 2000

TCP is ill-suited to real-time multimedia applications. Its bursty transmission, and abrupt and frequent wide rate fluctuations cause high delay jitters and sudden quality degradation of multimedia applications. Deploying non congestion controlled traffic results in extreme unfairness towards competing TCP traffic. Therefore, they need to be enhanced with congestion control schemes that not only am at reducing loss ratios and improve bandwidth utilization but also are fair towards competing TCP connections. This paper proposes a differentiated rate adaptation algorithm based on loss and round trip time. Rate in a sender quickly responds to loss ratio and holds steady state. Additionally, this algorithm reduces loss ratio by loss prediction in a receiver.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.124-128
• /
• 2011

This study estimated experimentally the loss distribution caused by magnetic friction in magnetic parts of a superconductor flywheel energy storage system (SFES) to obtain information for the design of high efficiency SFES. Through the spin down experiment using the manufactured vertical shaft type SFES with a journal type superconductor magnetic bearing (SMB), the coefficients of friction by the SMB, the stator core of permanent magnet synchronous motor/generator (PMSM/G), and the leakage flux of the metal parts were calculated. The coefficients of friction by the stator core of PMSM/G in case of using Si-steel and an amorphous core were calculated. The energy loss by magnetic friction in the stator core of PMSM/G was much larger than that in the other parts. The level of friction loss could be reduced dramatically using an amorphous core. Energy loss by the leakage magnetic field was small. On the other hand, the energy loss could be increased under other conditions according to the type of metal nearby the leakage magnetic fields. In manufactured SFES, the rotational loss by the amorphous core was approximately 2 times the loss of the superconductor and leakage. Moreover, the rotational loss by the Si-steel core is approximately 3~3.5 times the loss of superconductor and leakage.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.1
• /
• pp.36-43
• /
• 2016

Visualization of the tissue loss tangent property can provide distinct contrast and offer new information related to tissue electrical properties. A method for non-invasive imaging of the electrical loss tangent of tissue using magnetic resonance imaging (MRI) was demonstrated, and the effect of loss tangent was observed through simulations assuming a hyperthermia procedure. For measurement of tissue loss tangent, radiofrequency field maps ($B_1{^+}$ complex map) were acquired using a double-angle actual flip angle imaging MRI sequence. The conductivity and permittivity were estimated from the complex valued $B_1{^+}$ map using Helmholtz equations. Phantom and ex-vivo experiments were then performed. Electromagnetic simulations of hyperthermia were carried out for observation of temperature elevation with respect to loss tangent. Non-invasive imaging of tissue loss tangent via complex valued $B_1{^+}$ mapping using MRI was successfully conducted. Simulation results indicated that loss tangent is a dominant factor in temperature elevation in the high frequency range during hyperthermia. Knowledge of the tissue loss tangent value can be a useful marker for thermotherapy applications.

• Journal of the Korean Statistical Society
• /
• v.19 no.1
• /
• pp.88-92
• /
• 1990

In the problem of the recovery of interblock information in balanced incomplete block designs(BIBD), it is well known that a truncated estimator dominates the untruncated estimator under mean squared error loss. This paper shows that the domination result holds universally for every nondecreasing loss function.

• Journal of the Korean Data and Information Science Society
• /
• v.1
• /
• pp.35-45
• /
• 1990

The problem of estimating the reliability using the Bayesian approach and the prior information about tile reliability of a lognormal distribution is considered. Some Bayes estimators are proposed and studied under the squared error loss and tile Harris loss. Also Monte Carlo simulations are carried out to examine the performances of the proposed estimators and results are provided in the tables.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.920-923
• /
• 2008

We developed the Loss Preventing System using RFID in this paper. This system notifying and knowing that inform loss things from thief to individual precious things. Also, we design and implement to be response from loss thing, and we confirmed stability and proper by real field testing.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.287-294
• /
• 2013

Purpose: Greenhouses for a protected horticulture covered with a plastic or glass are easy to have weakness in a heat loss by deterioration, damage, poor construction, and so on. To grasp the vulnerable points of heat loss of the greenhouses is important for heating energy saving. In this study, an on-site heat loss audit and energy consulting system were developed for an efficient energy usage of a greenhouse. Method: Developed system was mounted with infrared thermal and visual cameras to grasp the heat loss from the greenhouse quickly and exactly, and a trial calculation program of heating load of greenhouse to provide farmers with the information of heating energy usage. Results: Developed system could print out the reports about the locations and causes of the heat losses and improvement methods made up by an operator. The mounted trial calculation program could print out the information of the period heating load and fuel cost according to the conditions of greenhouse and cultivation. The program also mounted the databases of the information on the 13 horticultural energy saving technologies developed by the Korea Rural Development Administration and simple economic analysis sub-program to predict the payback period of the technologies. Conclusion: The developed system was expected to be used as the basic equipment for an instructors of district Agricultural Technology and Extension Centers to conduct the energy consulting service for the farmers within the jurisdiction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.2
• /
• pp.263-283
• /
• 2024

Users' comments after online shopping are critical to product reputation and business improvement. These comments, sometimes known as e-commerce reviews, influence other customers' purchasing decisions. To confront large amounts of e-commerce reviews, automatic analysis based on machine learning and deep learning draws more and more attention. A core task therein is sentiment analysis. However, the e-commerce reviews exhibit the following characteristics: (1) inconsistency between comment content and the star rating; (2) a large number of unlabeled data, i.e., comments without a star rating, and (3) the data imbalance caused by the sparse negative comments. This paper employs Bidirectional Encoder Representation from Transformers (BERT), one of the best natural language processing models, as the base model. According to the above data characteristics, we propose the F_MixBERT framework, to more effectively use inconsistently low-quality and unlabeled data and resolve the problem of data imbalance. In the framework, the proposed MixBERT incorporates the MixMatch approach into BERT's high-dimensional vectors to train the unlabeled and low-quality data with generated pseudo labels. Meanwhile, data imbalance is resolved by Focal loss, which penalizes the contribution of large-scale data and easily-identifiable data to total loss. Comparative experiments demonstrate that the proposed framework outperforms BERT and MixBERT for sentiment analysis of e-commerce comments.