• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.101-114
• /
• 2006

Recently due to the increase of cars and city life, the traffic congestion has worsened. It Is particularly worse in the center of the metropolis. Within the general public means, the public transport buses have the advantage of being more cheap, accessible and mobile. But as there is no separate lane for buses, the collision of cars and buses are creating damage to public service. In order to solve this situation, the bus priority signal system has been introduced to reduce the bus travel time and improve its services. The purpose of this study is to establish bus priority signal algorithm which builds bus efficiency under the real-time traffic signal control system and to analyze the effect of it. As the green time was calculated against real time (under the real-time traffic signal control system), compared to existing bus priority signal there was a reduction in cross street loss. The modified cycle was used to maintain signal progression. A case study was carried out using VISSIM simulation model. In result of this study, we found that there was a decrease in bus travel time despite some evidence of car delays and compared to existing bus priority signal the delay of dishonor could be reduced dramatically. The analysed result of person delay using MOE, is that there is evidence that when bus priority signal is in effect, the person delay is reduced.

• Korean Journal of Social Welfare
• /
• v.59 no.3
• /
• pp.59-73
• /
• 2007

The compensation system in industrial accident insurance is systemized with "either receiving all or no benefits at all" according to "admited or denied as an industrial accident". Therefore, they are centered on the decision as "industrial accident" or "non-industrial accident", but judging between the two is very complicated, and has inherent conflicting factors. In the early stage of industrialization, industrial accident compensation was based on the indemnity liability for employer's faults. In order to be compensated any damage, the injured worker should prove that the accident was not due to his or her faults. However it was very difficult for injured worker or his or her family to prove the employer's faults, so it was almost impossible to get compensation. Thereafter industrialization progress and improvement of workers' political status lead to conversion from principle of liability with employer's faults to principle of liability without employer's faults. In addition to that, coverage of industrial accident compensation was also expanded. This improvement strengthened the benefit payment principle of "All or Nothing". Even though the "All or Nothing" principle provokes tremendous criticism, the reason why it's difficult for industrialized countries to adopt partial compensation system, is that partial compensation system worsens the administrative hardship, therefore industrialized countries overcome the restrictions of the "All or Nothing" principle with making balance in provisions for any risk to some extent. However, in Korea because the general compensation system for covering medical cost and income loss from accidents, is not equipped, it could be possible to cause acute conflicts with regard to coverage of industrial accidents. Therefore it is required to improve the industrial accident insurance with the acceptance of the significance and logic of discriminated compensation, and create the integrated compensation system in the long run.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.197-205
• /
• 2005

Development of the packaging is one of the critical issues for commercialization of the RF-MEMS devices. RF MEMS package should be designed to have small size, hermetic protection, good RF performance and high reliability. In addition, packaging should be conducted at sufficiently low temperature. In this paper, a low temperature hermetic wafer level packaging scheme for the RF-MEMS devices is presented. For hermetic sealing, Au-Sn eutectic bonding technology at the temperature below $300{\times}C$ is used. Au-Sn multilayer metallization with a square loop of $70{\mu}m$ in width is performed. The electrical feed-through is achieved by the vertical through-hole via filled with electroplated Cu. The size of the MEMS Package is $1mm\times1mm\times700{\mu}m$. By applying $O_2$ plasma ashing and fabrication process optimization, we can achieve the void-free structure within the bonding interface as well as via hole. The shear strength and hermeticity of the package satisfy the requirements of MIL-STD-883F. Any organic gases or contamination are not observed inside the package. The total insertion loss for the packaging is 0.075 dB at 2 GHz. Furthermore, the robustness of the package is demonstrated by observing no performance degradation and physical damage of the package after several reliability tests.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.279-290
• /
• 2008

Landslide, one of the serious natural disasters, has Incurred a large loss of human and material resources. Recently, many forecasting or alarm systems based on various kinds of measuring equipment have been developed to reduce the damage of landslide. However, only a few of these equipments are guaranteed to evaluate the safety of whole side of land slope with their accessibility to the slope. In this study, we performed some experiments to evaluate the applicability of a terrestrial LiDAR as a surveying tool to measure the displacement of a land slope surface far a slope collapsing protection system. In the experiments, we had applied a slope stability method to a land slope and then forced to this slope with a load increasing step by step. In each step, we measured the slope surface with both a total station and a terrestrial LiDAR simultaneously. As the result of Slope Fracturing analysis using all targets, the LiDAR system showed that three was 1cm RMSE on X-axis, irregularity errors on Y-axis and few errors on Z-axis compare with Total Station. As the result of Slope Fracturing analysis using continuous targets, the pattern of Slope Fracturing was different according to the location of continuous targets and we could detect a continuous change which couldn't be found using Total station. The accuracy of the LiDAR data was evaluated to be comparable to that of the total station data. We found that a LiDAR system was appropriate to measuring the behaviour of land slope. The LiDAR data can cover the whole surface of the land slope, whereas the total station data are available on a small number of targets. Moreover, we extracted more detail information about the behavior of land slope such as the volume and profile changes using the LiDAR data.

• Biomedical Science Letters
• /
• v.6 no.2
• /
• pp.119-129
• /
• 2000

The skin is an organ that has many important roles, including protection against infection, regulation of temperature and fluid loss, and sensory function. Injury to the skin, wound repair normally involves: (1) balanced activity of inflammation, (2) the re-epithelial phase and (3) the matrix formation of remodeling phase. Thus, skin wound healing is a finely controlled biological process involving a series of complex cellular interactions. Laser therapy is being implemented with increasing frequency in medicine. Low intensity laser is one that is capable of producing an energy density so low that any biologic alterations are the result of direct irradiation effect, not thermal events. This study was designed to evaluate the efficacy of low intensity laser therapy on skin wound healing in rabbits. A total of 10 male rabbits (New Zealand White Rabbit), age 8 weeks were used. Skin wound were surgically created dorso-lateral on the flank of 10 rabbits (2$\times$2 cm/damage areas). The experimental animals were treated with 5Hz (830 nm wave length) low-intensity laser (MILTA-01 Model) daily for 10 min (1.6 J/$cm^2$) for 12 days. Control animals were sham treated with the laser head. Laser irradiation animals showed a complete remodeling of the epithelial layer, a positive repair of connective tissues, and enhanced the wound closure rate over time as compared to the control animals. Especially, laser irradiation groups improved fibroblast activity, cellular content, granulation tissue formation, and collagen deposition which is resulted in improving the tensile strength of the wound. These findings suggest that laser photostimulation could accelerate healing of open wound in rabbits, and may be benefit in the treatment of open wound, including decubitis ulcers.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.12 no.1
• /
• pp.58-63
• /
• 2012

Classical galactosemia (OMIM# 230400) is an autosomal recessive disorder of carbohydrate metabolism, due to a complete loss in galactose-1-phosphate uridyltransferase (GALT; E.C.2.7.7.12) enzyme activity. It caused by mutations in the GALT gene (OMIM$^*$ 606999) that is located at chromosome 9p13. The GALT enzyme deficiency results in a build-up of galactose and galactose-1-phosphate, causing life threatening complications such as feeding problems, failure to thrive, hepatocellular damage, bleeding and sepsis. However, Duarte galactosemia, a variant form of GALT deficiency, has residual GALT enzyme activities in erythrocytes and do not have manifest the symptoms of classical galactosemia. Since the advent of newborn screening (NBS) for galactosemia, we rarely encounter such overwhelmingly ill newborns. The positive NBS with no symptoms indicates the possibility of Duarte galactosemia besides a simple false positive and it has to be differentiated from classical galactosemia which is a medical emergency. In Korea, detection rate of Duarte galactosemia is very low and its genetic information is restrictive, too. We report a case of monozygotic twins with D/G galactosemia compound heterozygote in proven by the mutational analysis of GALT gene, which revealed N314D polymorphism and -119 to -116 delGTCA.

• Korean journal of applied entomology
• /
• v.22 no.4 s.57
• /
• pp.244-250
• /
• 1983

This study was carried out to analyst the damage due to the brown planthopper, Nilapalvata lugens Stal, at different stages(maximum tillering, booting, heading, and milking) of rice. The results are as follows: The population density of the migrating and the first generations of the brown planthoppers seemed not to be large enough to cause significant effects on the plant height and the number of tillers, while the second and the third generations caused significant reduction in 1000 grain weight(Yl) and the filled grain percentage$(Y_2)$. They were very closely related to the population density(X) of tile second generation of the BPH; $$Y1(g)=25.602-0.0213X(r=-0.5205^{**})$$ $$Y2(\%)=76.97-0.1370X(r=-0.4820^{**})$$ The relationship between rice yield (Yg) and the accumulated total density (X) of BPH per hill by the time of harvest; $$Y(g)=24.694-0.0576X(r=-0.6959^{**})$$ Since the source of the outbreak BPH is the first generation, it nay conclude that the detailed information on the population status of the first generation; density, age components, ratio of the brachypterous form, are very important in relation to management of the pest.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.30 no.4
• /
• pp.217-234
• /
• 2019

National Records Designation System is designed to protect valuable civilian records from loss or damage. It also intends that government administrates important civilian records to raise public concerns civilian records and to foster archival culture in Korea. This study investigates the current states of service fo the designated record through the web page of National Archive of Korea. Major findings are as follows. First, the information of designated records is dispersed in two web pages by the National Archive of Korea, an introductive web page of every collection in the National Archive of Korea and a web page of designated record service. Second, the web page of designated record service provides information of designated records only at collection level, so it is not easy for users to understand the contents of the records. In order to improve the service for the designated record service of the National Archive of Korea, this study proposed the unification of dispersed web pages to provide information of the designated records consistently. It also suggested a facet based directory service and word cloud service to give access to the contents of each designated record collection. The facet based directory and word cloud service will help users to understand the designated records in more detail.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.37-43
• /
• 2014

Natural disasters such as earthquakes and tsunamis occur suddenly, so that they cause massive loss of lives and property. Especially earthquakes represent a particularly severe threat because of the extensive damage accompanied by them. In Korea, an earthquake-resistant design has been rarely applied to a design or construction of slope. However, in resent years, the researches for earthquake-resistance have been performed because the importance on the earthquake-resistance is perceived and highlighted. Soil nail method, one of the slope stability methods, is excellent for its constructability and cost effectiveness, as compared with other stability methods. Also, this method has been widely used for reinforced construction for slope stability. The studies of soil nail method have been performed on the interaction behavior between nails and slopes as well as the varied load condition such as static load, dynamic load and so on. Nevertheless, there has been minimal research regarding the constraint condition of nail head. In this study, the numerical analysis was performed for identifying effect on slope stability for the constrain condition of the soil nail. The result shows that the resistance of constrained the nail head on reinforced slope is larger compared to the one of unconstrained nail head.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.48-56
• /
• 2024

Objectives: The coronavirus pandemic that began in 2019(COVID-19) has been one of the worst pandemics of the 21st century. Masks have been used to prevent COVID-19, but there are currently no standards for the long-term use of masks in the Republic of Korea. This study was conducted to assess the microbiological safety of KF94(Korea Filter 94) disposable face masks according to wearing duration by evaluating the bacterial filtration efficiencies of masks worn by research participants. Methods: A commercially available KF94 mask certified by the Ministry of Food and Drug Safety(MFDS) in the Republic of Korea was selected as the test mask. The research participants(n = 15) wore masks for the durations of one, three, and seven days. Participants also reported several parameters, including wearing time, makeup frequency, and storage. Bacterial filtration efficiencies of the worn masks were measured by a mask bioaerosol filtration tester. Staphylococcus aureus(S. aureus) was used as the test bacteria and quantitatively measured through the cultivation method. Then, bacterial filtration efficiency was calculated using the formula suggested by the MFDS. Results: All worn masks showed over 99.98% of mean bacterial filtration efficiency for S. aureus. There were no significant differences among bacterial filtration efficiencies of face masks according to wearing duration. There was also no significant difference among bacterial filtration efficiencies among participants. There was no correlation between the results of bacterial filtration efficiencies and reported parameters from participants. Conclusions: In the absence of significant external damage to the mask, the bacterial filtration efficiency of the mask can be maintained even after seven days of wearing. This result suggests that KF94 masks certified by the MFDS can be used repeatedly for about a week without loss of bacterial filtration efficiency.