• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.422-432
• /
• 2004

This study investigated underwear consumption behavior of women, who were 20∼59 years old and resided in Incheon during 2002 summer. 372 women completed questionnaires, and data were analyzed using factor analyses, t-test, ANOVA, $\chi$$^2$-analyses. They usually purchased underwear considering comfort and economic factor at a discount store. They wore sleeveless T-shirts, but they didn't wear underpants except panties highly all the year round. Higher rate of them wore pantyhose instead of underpants during autumn, winter and spring. They demanded unstitching of stitches and lengthened sleeves in most of the groups. And older and lowly educated women group wanted widen armhole of upper underwear, and tighten waistband of panties. They generally washed in washing machine using cold water. Besides they added oxygen bleach and softner during wash and final rinse. Older than 20's boil their underwear frequently. The women in a group of boiling commonly answered the looseness of waistband. It is recommended not to boil but to soak with bleach added warm water for improving the whiteness and durability of underwear. For a treatment with higher temperature deprives the elasticity of spandex.

• Journal of Korean Association for Spatial Structures
• /
• v.3 no.2 s.8
• /
• pp.91-99
• /
• 2003

The purpose of this study is to analyze the characteristics of the connector having an influence on the elasto-plastic buckling load of ball-jointed single layer latticed domes. As an analytic model, domes are composed of tubular member elements, balls and connectors. The joint system of members in single layer latticed domes has influence on the buckling load. Therefore, in this paper, the variation of the elasto-plastic buckling load by effects of the connectors characteristics is analyzed. The structural behavior of the connector is investigated by following points: (1) the length of rigid zone, (2) looseness of screw and (3) the diameter of connector. In addition, the elasto-plastic buckling analysis is carried out through the variation of the connectors section of yielding part, and then the buckling mode of the dome is examined. As a result, it is emphasized that the characteristics of the connector have significant effects on the buckling load of latticed domes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.303-312
• /
• 2003

This paper suggests a fuzzy expert system for fault diagnosis of rotating machinery, based on modulated databases. In the proposed system, alarm and trip levels are set based on ISO, considering operating condition, machinery type and maintenance history. Input signals for diagnosis, such as sub- and super-harmonic components of vibration and mean value, are normalized from 0 to 1 under the threshold level and otherwise equal to one so that chronic faults slightly below the threshold level can be monitored. The database for diagnosis consists of two modules: the well-known Sohre's chart module and if-then type rules. The Sohre's chart is utilized for the most common problems of high-speed turbomachinery, while the rule-based module, which was collected from many papers and reports, is for diagnosing peculiar faults according to the type of machinery. To infer the results from two modules, a fuzzy operation of Yager sum was adopted. Using a simulator constructed in laboratory, experimental verification was performed for the cases of resonance and housing looseness which were intended. The experimental results show that the proposed fuzzy expert system has feasibility in practical diagnosis of rotating machinery.

• Korean journal of medical education
• /
• v.30 no.4
• /
• pp.317-326
• /
• 2018

Purpose: The study examines changes in students' self-assessment of their general communication (GC) and medical communication (MC) competencies, as well as perceptions of MC concepts. Methods: Participants included 108 second year medical students enrolled at a Korean medical school studying an MC curriculum. It was divided into three sections, and participants responded to questionnaires before and after completing each section. To assess perceived GC and MC competency, items based on a 7-point Likert scale were employed; a single open-ended item was used to examine students' perceptions of MC. Statistical analysis was conducted to gauge GC and MC competency, whereas semantic network analysis was used to investigate students' perceptions of MC. Results: Students perceived their GC competency to be higher than MC. Perceived MC competency differed significantly across the three sections, whereas no differences were found for GC. There were no statistically significant differences after completing the curriculum's second and third sections; however, the vocabulary students used to describe MC concepts became more scholarly and professional. In the semantic networks, the link structure between MC-related words decreased in linearity and looseness, becoming more complex and clustered. The words 'information' and 'transfer' proved integral to students' perceptions; likewise, 'empathy' and 'communication' became closely connected in a single community from two independent communities. Conclusion: This study differed from prior research by conducting an in-depth analysis of changes in students' perceptions of MC, and its findings can be used to guide curriculum development.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.6
• /
• pp.362-366
• /
• 1985

The hydrogen atom transfer reaction between substituted methane, $CH_3X,$ and its radical, $CH_2X(X=H,F,CH_3,CN,OH\;and\;NH_2$ was studied by MINDO/3 method. The transition state(TS) structure and energy barriers were determined and variation of the transition state and of the reactivity due to the change of X were analyzed based on the potential energy surface characteristics. It was found that the greater the radical stabilization energy. the looser the TS becomes; the TS occurs at about 15% stretch of the C-H bond, which becomes longer as the radical stabilization energy of $CH_2X$ increasers. The intrinsic barrier, ${\Delta}E*_{x.x},$ of the reaction with X was found to increase in the order $H The degree of bond stretch of the C-H bond stretch of the C-H bond at the TS also had the same order indicating that the homolytic bond cleavage of the C-H bond is rate-determining. Orbital interactions at the TS between LUMO of the fragment $C{\ldots}H{\ldots}C$ and the symmetry adapted pair of nonbonding, $n{\pm}(=n_1{\pm}n_2),$ or pi orbitals of the two X atoms were shown to be the dominant contribution in determining tightness or looseness of the TS. The Marcus equation was shown to apply to the MINDO/3 barriers and energy changes of the reaction.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.513-520
• /
• 2022

During the long-time service of a bolt, its preload may suffer slight perturbations or significant reductions. It is a dilemma to monitor preload changes at high resolution and full scale. Approaches for bolt preload monitoring with multi-resolution should be developed. In this paper, a simple and effective multi-resolution bolt preload monitoring approach using ultrasonic guided waves (UGW) is proposed. A linear relationship between the time-of-flight (TOF) variation of multi-reflected waves and preload is derived to theoretically reveal the multi-resolution properties of UGW. The variations of TOF before and after the slight preload perturbations are extracted by using a global evaluation method. Experimental results show that the signal-to-noise ratio (SNR) of the 1^st, 2^nd, and 3^rd-reflected UGWs is larger than 20 dB. The resolution of the 2^nd-reflected UGW is higher than that of the 1^st-reflected UGW and lower than that of the 3^rd-reflected UGW. The ultimate detectable resolutions of bolt preload (DRBP) of the 1^st and 3^th-reflected UGWs are 0.9% and 0.5%, respectively. By using the 1^st and 3^th-reflected guided waves, the bolt looseness with different degrees can be monitored simultaneously.

• The Journal of Natural Sciences
• /
• v.17 no.1
• /
• pp.89-101
• /
• 2006

The purpose of this study is to analyze the design preference according to the body consciousness for 20~26 years old male. The consciousness of body size and the satisfaction with body proportion were investigated. And the relationship between the body consciousness and the design preference was analyzed. Most subjects thought their body size was proper generally and their body proportion was proper or a little unsatisfied. The subjects preferred 'Round neckline', 'loose sleeve', and 'loose and long tops'. They didn't like the style that tops are under pants on the waist. They also preferred 'loose and long pants'. When the subjects chose clothing design, especially 'V-neckline tops' and 'short pants', they considered their height. They also considered their girth size and it meant they thought much of looseness. There was not any preference in clothing design according to the consciousness of height. The most significant relationships between the size consciousness and the preference in design was found in tops more than pants. The higher satisfaction with their body proportion was connected with the higher preference in some design. From all these result, it was found that the preference of clothing design could vary according to the consciousness of body size. The results from this study could give the important tips to improve the satisfaction with the clothing for each person.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.49-58
• /
• 2006

This study is on the general characteristics of 'Monolithic' architecture. The intentions of monolithic architecture can be assumed as an attempt to replace the formal looseness or difficulties of understanding formal complexity of modern architecture, or a trial to react against contemporary avant-garde architectural tendency typically characterized as unstableness, uncertainty, fluidity, and articulation to reestablish autonomy of architecture. Buildings in this category coincide in their extreme economy and simplicity of overall form and consistency of external appearance while showing great expressional capacity with very limited formal means. Even though monolithic architecture still seems a little unstable and ambiguous in historical aspects, it can be considered as strikingly shaped objects or autonomous forms with identities, logics, and representation that promote recognition. Using architectural techniques of scale, colors, materials and finishes, monolithic architecture shows strategically invested surfaces that mediate between the inside and the outside, and shows unexpected and mysterious autonomy. This kind of monolithic approach is also found in interior space as a separate objects that contain functional space inside, or as formal elements that overflow the boundaries of conventional architecture by eliminating the distinction between floor, wall, and ceiling.

• 보존과학연구
• /
• s.34
• /
• pp.32-48
• /
• 2013

This study examined the applicability of deterioration monitoring techniques to establish efficient conservation and management system for stone cultural heritage which conservation treatment has been done. It was confirmed that deterioration mapping combined with photography and grid work, and adhesive tape test for the surface were very applicable to investigate the surface change due to deterioration, and assess the degree of granular disintegration quantitatively. The portable microscopic survey and ultrasonic measurement were efficient techniques to observe mineral looseness and microcrack, and to track the strength change of the stone before-and-after the conservation treatment. These techniques can be easily used by manage practitioners in the field through simple guidance and technical education. Also, it can contribute to build a long-term and methodical conservation and management system of the stone cultural heritage.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.324-331
• /
• 2012

The domestic pine was used to investigate the change of specific gravity, moisture contents, color and anatomical structure by accelerated weathering test (AWT). According to visual inspection, a few knot separation and looseness as well as considerable surface discoloration was found out. However, the crack and split of surface texture have been never occurred till the last step of AWT. On the whole, as the time of accelerated weathering test has increased, the specific gravity has decreased. Finally, after the 9th week of AWT, the specific gravity was 0.38 that reached to 82% compared to the control specimen. In case of moisture content (MC), it showed rising trend in its early stages, however, after 3th week of AWT it have displayed steady state. A deterioration of cell-wall components was not remarkably observed by scanning electron microscope (SEM), however the ray fractures of AWT specimen were observed more than those of control specimen. The full fracture of epithelial cell around resin canal was observed by optical microscope. The fracture of ray of 2th cycle AWT specimen was first, followed by 1th week and control group. A distortion of tracheid for early spring wood and fracture of epithelial cell were generally observed by a similar level, regardless of duration time of AWT. Therefore, it is obvious that increasing duration time of AWT does not affect the deterioration of micro-structure for wood members from this study. Although a considerable change of anatomical properties was not found, there is a need of further research to understand how will the changes of specific gravity and MC on the physical properties of wood member.