• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.471-481
• /
• 1995

Measurement factors for the dielectric properties of low dielectric loss materials (tan${\dalta}{\le}10^{-4}$) were investigated using the dielectric rod resonator method. It was shown that the relative conductivity (${\sigma}_{r}$) should be controlled within a 5% to obtain the standard deviations of less than 0.07 for permittivity .epsilon.r and 0.06${\times}10^{-4}$ for tan.delta.respectively. Surface resistivity (R$_s$) could be reduced when the surface roughness of parallelled conducting plate was less than 0.07 .mu.m. Measurement error for the permittivity was $\pm$0.02% independent of probe loop size, whereas the error in Q value was reduced with the decrease in probe loop size and also with the increase in the absolute values of Q. Reliable Q values were determined with the probe loop size of less than 4mm. The accurate for the distance between the measuring probe loop and the sample could be obtained when the insertion loss of resonant frequency ranged -15dB - -30dB.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.54-65
• /
• 1993

The paper describes and alternative method based on a new idea to measure the circular movement of machining centers. ISO has employed three testing methods for the acceptance tests of machine tools; the first is a rotating one-dimensional probe method, the second is a two-dimensional probe and a master circular ring, and the third is a kinematic ball bar. The last two methods were proposed and introduced by W. Knapp and J. B. Bryan, respectively. The newly developed method is superior to above two methods; the rotating angle can be detected and the rotating radius is variable. Circular movement errors of machining centers were investigated by the analysis of data measured by R- .THETA. method. Followint observations are obtained 1) The errors which depend on positions, i.e., periodical errors by the pitch of ball screws, errors by compensation of backlash and errors by perpendicularity of X and Y-axis, were analyzed. 2) The errors which depend on NC control system, i.e., errors by the unbalance of position-loop-gaians, errors by velocity-loop-gains and errors by feed speeds, were quantiatively analyzed. 3) The method of extracting error information, which uses moving technique of averaging angle and fourier's analysis data mesured by the R- .THETA. method, was proposed.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.29-37
• /
• 2009

It is as result that study to apply mini magnet nerve curer in peripheral nervous system disease treatment. Simulator and embodied action power and Control Unit in cylinder form of magnet roof object firstly. Yielded service area about special quality of probe of loop object cylinder style and treatment area dimension and distance of treatment pulse secondly. Embody pulse forming course energy value by Probe's form by third, could embody treatment pulse by disease. Specially, through a special quality experiment, saved Damping pulse form and treatment digital forming etc. variously. Lately, embodied this to aid a little in disease treatment that follow that there is no invasion that there is no stimulation by medicine development. Neuralgia, muscular disease and Altzheimer, with stroke etc. is becoming the matter of concern and interest which disease of adult etc. it is same is important. And the melancholia in compliance with the modern direction of a ceremony which is complicated and garrulous, trillion it will cry and symptoms, it is a tendency where the emotional obstacle etc. nervous psychiatric disorder patient is increasing at class speed. But currently the applicator it will be able to treat like this disease almost it is a condition which is wholly lacking. Consequently like this disease it used magnetic stimulation and it diagnosed and the equipment it will be able to treat plan and it embodied.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.73-80
• /
• 2001

The objective of this research is to develop a measurement error model for sculptured surface in On-Machine Measurement(OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC machining center is derived using a 4$\times$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the sculptured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-sep measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.172-181
• /
• 1999

The objective of this research is to develop a measurement error model for sculptured surfaces in On-Machine Measurement (OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC Machining center is derived using a 4${\times}$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the scupltured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also, the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-step measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.

• 한국전자파학회논문지
• /
• 제18권10호
• /
• pp.1117-1125
• /
• 2007

본 논문은 스마트카드에서 방사되는 전자파를 이용한 암호 분석용 소형 루프 프로브 설계와 프로브에 유기된 전자파 신호의 분석에 관한 연구이다. 암호 분석용 프로브는 일반적인 전자장 측정용 프로브와는 다르다. 그 이유는 제시된 프로브의 목적은 암호 장비의 비밀 키 해독에 필요한 정보를 얻기 위함이기 때문이다. 스마트카드에서 발생된 파형을 분석하여서 전자파 공격을 시도하기 때문에 프로브에 유기된 전압의 파형과 IC 칩에서 발생된 파형은 가능한 한 서로 동일해야 한다. 그 목적을 위해서 전자파를 이용한 암호 분석, 신호원의 근사 모델링, 암호 분석용 프로브의 특징, 전자파 신호 측정 그리고 프로브의 교정에 대한 검토가 필요하다. 스마트카드 칩의 소비 전력 신호와 제안된 프로브를 이용한 전자파 신호를 측정하고 두 신호를 EMA의 관점에서 비교하였다. ARIA 알고리즘을 적용하여 제안된 비접촉 암호 분석용 프로브의 적합성 여부를 실험적으로 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.73-79
• /
• 2008

Result that study magnet nerve curer for treatment induced current generation and current of ion for development in main point incontinence, prostate, sphincter, nervous system, rigidity, headache, retrogression arthritis, ligament damage, Rheumatism arthritis, peripheral nerve etc., can classify by 4. Embodied do first, full bridge magnet occurrence chapter, and communication with PC is available, confirmed various action loops an experiment. Could confirm correct treatment probe second, woman and man disease person. Third, derived so that healing may be possible naturally by addition of apron form according to disease. Because composition of finally, treatment probe composes by act of negative plate form, manufacture is easy and cooling designed for easy direction. More superior result of cooling appeared than existing in incidental and ingredients, cooling efficiency, composition, complexity, convenience etc. that expense and composition manufacture very straightforwardly and experimental by 2 - Tank ways.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.49-51
• /
• 2007

It is as result that study to apply mini magnet nerve curer in peripheral nervous system disease treatment. Design and embodied action power and Control Unit in cylinder form of magnet roof object firstly. Yielded service area about special quality of probe of roof object cylinder style and treatment area dimension and distance of treatment pulse secondly. Embody pulse forming course energy value by Probe's form by third, could embody treatment pulse by disease. Specially, through a special quality experiment, saved Damping pulse torn and treatment pulse form etc. variously. Lately, embodied this to aid a little in disease treatment that follow that there is no invasion that there is no stimulation by medicine development. Go amplitude treatment pulse (traditional magneto-therapy of greatly great that strong) does curative effect greatest at short time and becomes thought that demand is magnified greatly at the future in this research.

• 한국축산식품학회지
• /
• 제25권2호
• /
• pp.218-225
• /
• 2005

본 연구는 mt DNA의 D-loop 영역을 probe로 이용한 Southern blot hybridization 분석 기법을 이용하여 한우에서 mt DNA의 RFLP를 분석하고 RFLP marker가 유생산에 미치는 영향을 분석하여 산유량 관련 DNA marker를 개발하고자 수행하였다. Mt DNA의 D-loop 영역내 404번부터 15061까지 1142 bp 크기의 염기 서열 부위를 특이적인 primer를 이용하여 PCR로 증폭하였다. Mt DNA를 HpaII, BamHI, XbaI, HinfI, EcoRI, HindII 및 RsaI 7종류의 제한효소를 이용하여 각각 절단한 후 DIG로 표지된 D-loop probe를 이용하여 검출한 결과 XbaI, RsaI, BamHI 및 HpaII 4종류의 제한효소에서 각각 RFLP 다형성이 검출되었고 EcoRI, HindIII 및 HinfI 3종류 제한효소는 변이가 존재하지 않았다. 다유 계통과 저유 계통 선발 집단간의 각 제한효소별 RFLP type의 출현빈도를 비교한 결과 BamHI 및 RsaI 제한효소에서 두 집단간의 RFLP type의 출현율에 각각 통계적 유의성(P<.05)이 인정되었다. 다유 및 저유성으로 극단의 육종가 값을 갖는 두 계통의 mt DNA D-loop영역의 염기 서열을 비교 분석한 결과 441번째 염기가 G/C, 469번째 염기는 T/C, 503번째 염기는 C/T, 569번째 염기는 G/A, 614번째 염기는 C/A그리고 644번째 염기는 C/T로 각각 염기가 치환되었고 특히, 다유 계통 개체의 677번째의 A염기가 저유 계통 개체에서는 결실되어 있다는 사실이 확인되었다. 한편, 한우 암소의 유생산에 영향을 미치는 효과를 규명하기 위하여 mt DNA RFLP 형과 송아지 이유시 체중, 생시체중 및 비유량을 측정하여 얻어진 육종가의 성적을 근거로 통계 분석한 결과 XbaI 제한효소의 RFLP type이 산유 능력 육종가와 유의적인 관련성이 확인되었다 (P<05). 즉, RFLP A type을 갖는 축군의 평균 육종가 추정치가 6.233으로 B type을 갖는 축군의 평균 육종가 추정치 0.757보다 월등히 높은 것으로 나타났다. 결론적으로 산유량과 관련성이 확인된 mt DNA RFLP type은 한우의 산유량 향상을 위한 DNA marker로 이용 가능할 것으로 기대된다.

• Journal of Microbiology and Biotechnology
• /
• 제34권6호
• /
• pp.1322-1327
• /
• 2024

The accurate and rapid detection of methicillin-resistant Staphylococcus aureus (MRSA) holds significant clinical importance. This work presents a new method for detecting methicillin-resistant Staphylococcus aureus (S. aureus) in clinical samples. The method uses an aptamer-based colorimetric assay that combines a recognizing probe to identify the target and split DNAzyme to amplify the signal, resulting in a highly sensitive and direct analysis of methicillin-resistance. The identification of the PBP2a protein on the membrane of S. aureus in clinical samples leads to the allosterism of the recognizing probe, and thus provides a template for the proximity ligation of split DNAzyme. The proximity ligation of split DNAzyme forms an intact DNAzyme to identify the loop section in the L probe and generates a nicking site to release the loop sequence ("3" and "4" fragments). The "3" and "4" fragments forms an intact sequence to induce the catalytic hairpin assembly, exposing the G-rich section. The released the G-rich sequence of LR probe induces the formation of G-quadruplex-hemin DNAzyme as a colorimetric signal readout. The absorption intensity demonstrated a strong linear association with the logarithm of the S. aureus concentration across a wide range of 5 orders of magnitude dynamic range under the optimized experimental parameters. The limit of detection was calculated to be 23 CFU/ml and the method showed high selectivity for MRSA.