• Korean Journal of Remote Sensing
• /
• v.32 no.1
• /
• pp.67-71
• /
• 2016

The surface reflectance is essential to retrieval various indicators related land properties such as vegetation index, albedo and etc. In this study, we estimated surface reflectance using Himawari-8 / Advanced Himawari Imager (AHI) channel data. In order to estimate surface reflectance from Top of Atmosphere (TOA) reflectance, the atmospheric correction is necessary because all of the TOA reflectance from optical sensor is affected by gas molecules and aerosol in the atmosphere. We used Second Simulation of a Satellite Signal in the Solar Spectrum Vector (6SV) Radiative Transfer Model (RTM) to correct atmospheric effect, and Look-Up Table (LUT) to shorten the calculation time. We verified through comparison Himawri-8 / AHI surface reflectance and Proba-V S1 products. As a result, bias and Root Mean Square Error (RMSE) are calculated about -0.02 and 0.05.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.21-34
• /
• 1998

[n this paper, we propose a hierarchical self-organizing fuzzy logic controller to improve the performance of the FARMA(Fuzzy auto-regressive moving average) SOC(Self-organizing fuzzy logic controller) when the system parameters change. The proposed controller contains the FARMA SC)C in the lower level and has a coordinator in the higher level, which evaluates convergence. and when it senses the degradation of system performance it compensates the control input by a look-up table. The proposed controller shows good perforniance over the FARMA SOC when the system parameters change. We executed some computer simulations on the regulation problem of an inlrerted pendulum system and compared the results with those of the FARMA SOC. As a result, it ha:; been shown that the proposed controller outperformed the FARMA SOC when the changes of the system parameters occurred.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.379-383
• /
• 2006

Satellite imagery may contain large regions covered with atmospheric aerosol. A highresolution satellite imagery affected by non-homogenous aerosol cover should be processed for land cover study and perform the radiometric calibration that will allow its future application for Korea Multi-Purpose Satellite (KOMPSAT) data. In this study, aerosol signal was separated from high resolution satellite data based on the reflectance separation method. Since aerosol removal has a good sensitivity over bright surface such as man-made targets, aerosol optical thickness (AOT) retrieval algorithm could be used. AOT retrieval using Look-up table (LUT) approach for utilizing the transformed image to radiometrically compensate visible band imagery is processed and tested in the correction of satellite scenery. Moderate Resolution Imaging Spectroradiometer (MODIS), EO-l/HYPERION data have been used for aerosol correction and AOT retrieval with different spatial resolution. Results show that an application of the aerosol detection for HYPERION data yields successive aerosol separation from imagery and AOT maps are consistent with MODIS AOT map.

• Korean Journal of Remote Sensing
• /
• v.23 no.1
• /
• pp.7-14
• /
• 2007

Atmospheric correction is one of critical procedures to extract quantitative information related to biophysical variables from hyperspectral imagery. Most atmospheric correction algorithms developed for hyperspectral data have been based upon atmospheric radiative transfer (RT) codes, such as MODTRAN. Because of the difficulty in acquisition of atmospheric data at the time of image capture, the complexity of RT model, and large volume of hyperspectral data, atmospheric correction can be very difficult and time-consuming processing. In this study, we attempted to develop an efficient method for the atmospheric correction of EO-1 Hyperion data. This method uses the pre-calculated look-up-table (LUT) for fast and simple processing. The pre-calculated LUT was generated by successive running of MODTRAN model with several input parameters related to solar and sensor geometry, radiometric specification of sensor, and atmospheric condition. Atmospheric water vapour contents image was generated directly from a few absorption bands of Hyperion data themselves and used one of input parameters. This new atmospheric correction method was tested on the Hyperion data acquired on June 3, 2001 over Seoul area. Reflectance spectra of several known targets corresponded with the typical pattern of spectral reflectance on the atmospherically corrected Hyperion image, although further improvement to reduce sensor noise is necessary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4587-4605
• /
• 2019

High Efficiency Video Coding (HEVC) suffers from high computational complexity due to its quad-tree structure in motion estimation (ME). This paper exposes an adaptive search range decision algorithm for accelerating HEVC integer-pel ME on GPU which estimates the optimal search range (SR) using a MAP (Maximum A Posteriori) estimator. There are three main contributions; First, we define the motion feature as the standard deviation of motion vector difference values in a CTU. Second, a MAP estimator is proposed, which theoretically estimates the motion feature of the current CTU using the motion feature of a temporally adjacent CTU and its SR without any data dependency. Thus, the SR for the current CTU is parallelly determined. Finally, the values of the prior distribution and the likelihood for each discretized motion feature are computed in advance and stored at a look-up table to further save the computational complexity. Experimental results show in conventional HEVC test sequences that the proposed algorithm can achieves high average time reductions without any subjective quality loss as well as with little BD-bitrate increase.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.191-196
• /
• 2021

In this paper, we implemented an image sensor module possible of detecting color temperature in an indoor environment. The color temperature information in the video information acquired by the image sensor was matched with a color difference illuminometer to produce an LUT. An algorithm was developed so that color temperature information according to the received RGB values can be automatically calculated. As a result of measuring the color temperature with an image sensor indoors, an accurate result of less than 5.91% was obtained compared to the reference value. It was confirmed that the uniformity of 23.5% or more was excellent compared to the color temperature measurement result using a color sensor.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.49-60
• /
• 2021

The Core Protection Calculator System (CPCS) is vital for plant safety as it ensures the required Specified Acceptance Fuel Design Limit (SAFDL) are not exceeded. The CPCS generates trip signals when Departure from Nucleate Boiling Ratio (DNBR) and Local Power Density (LPD) exceeds their predetermined setpoints. These setpoints are established based on the operating margin from the analysis that produces the SAFDL values. The goal of this research is to create a simplified CPCS that optimizes operating margin for I-SMRs. Because the I-SMR is compact in design, instrumentation placement is a challenge, as it is with Ex-core detectors and RCP instrumentation. The proposed CPCS addresses the issue of power flux measurement with In-Core Instrumentation (ICI), while flow measurement is handled with differential pressure transmitters between Steam Generators (SG). Simplification of CPCS is based on a Look-Up-Table (LUT) for determining the CEA groups' position. However, simplification brings approximations that result in a loss of operational margin, which necessitates compensation. Appropriate compensation is performed based on the result of analysis. FPGAs (Field Programmable Gate Arrays) are presented as a way to compensate for the inadequacies of current systems by providing faster execution speeds and a lower Common Cause Failure rate (CCF).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.1
• /
• pp.5-15
• /
• 2016

Power analysis attacks are techniques to analyze power signals to find out the secrets when cryptographic algorithm is performed. One of the most famous countermeasure against power analysis attacks is masking methods. Masking types are largely classified into two types which are boolean masking and arithmetic masking. For the cryptographic algorithm to be used with boolean and arithmetic masking at the same time, the converting algorithm can switch between boolean and arithmetic masking. In this paper we propose an algorithm for switching from boolean to arithmetic masking using storage size at less cost than ones. The proposed algorithm is configured to convert using the look-up table without the least significant bit(LSB), because of equal the bit of boolean and arithmetic masking. This makes it possible to design a converting algorithm compared to the previous algorithm at a lower cost without sacrificing performance. In addition, by applying the technique at the LEA it showed up to 26 percent performance improvement over existing techniques.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.297-304
• /
• 2016

When a control algorithm is developed to protect automotive compressor surges, the simulation model typically selects an empirically determined look-up table. However, it is difficult for a control oriented empirical model to show surge characteristics of the super charger. In this study, a dynamic supercharger model is developed to predict the performance of a centrifugal compressor under dynamic load follow-up. The model is developed using Simulink$^{(R)}$ environment, and is composed of a compressor, throttle body, valves, and chamber. Greitzer's compressor model is used, and the geometric parameters are achieved by the actual supercharger. The simulation model is validated with experimental data. It is shown that compressor surge is effectively predicted by this dynamic compressor model under various operating conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1231-1238
• /
• 2005

This paper presents a new fast encoding algorithm for image vector quantization that incorporates the partial distances of multiple features with a multidimensional look-up table (LUT). Although the methods which were proposed earlier use the multiple features, they handles the multiple features step by step in terms of searching order and calculating process. On the other hand, the proposed algorithm utilizes these features simultaneously with the LUT. This paper completely describes how to build the LUT with considering the boundary effect for feasible memory cost and how to terminate the current search by utilizing partial distances of the LUT Simulation results confirm the effectiveness of the proposed algorithm. When the codebook size is 256, the computational complexity of the proposed algorithm can be reduced by up to the $70\%$ of the operations required by the recently proposed alternatives such as the ordered Hadamard transform partial distance search (OHTPDS), the modified $L_2-norm$ pyramid ($M-L_2NP$), etc. With feasible preprocessing time and memory cost, the proposed algorithm reduces the computational complexity to below the $2.2\%$ of those required for the exhaustive full search (EFS) algorithm while preserving the same encoding quality as that of the EFS algorithm.