• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.263-272
• /
• 1998

This paper presents the new control strategy that can minimizes the torque ripple by considering the magnetic nonlinearity and phase torque averlapping intervals, and describes the whole SRM drive system using proposed control method implemented by DSP(Digital Signal Processor). To do this, inductance and torque are, at first, measured according to the variation of rotor position angle while current is kept constant at predetermined several values. From these measured values, the entire inductance and torque for any current and rotor position are inferred by using neural network. And the waveform of the reference phase torque is determined for the torque ripple to be minimized considering the torque overlap between phases. The controller is designed for the actual torque obtained by the inferred torque look-up table using measured current and rotor position angle to track the predetermined reference phase torque by delta modulation technique. To perform a real time processing and ensure the reliability of the controller, DSP is implemented.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.744-749
• /
• 2007

Kinematic and kinetic analysis has been performed for Soft Golf swings utilizing realistic three dimensional computer simulations based on three dimensional motion tracking data. Soft Golf is a newly developed recreational sport in South Korea aimed to become a safe and easy-to-learn sport for all ages. The advantage of Soft Golf stems from lighter weight of the club and much larger area of the sweet spot. This paper tries to look into kinematic and kinetic aspects of soft golf swings compared to regular golf swing and find the advantages of lighter Soft Golf clubs. For this purpose, swing motions of older aged participants were captured and kinematic analysis was performed for various kinematic parameters such as club head velocity, joint angular velocity, and joint range of motions as a pilot study. Kinetic analysis was performed by applying kinematic data to computer simulation models constructed from anthropometric database and the measurements from the participants. The simulations were solved using multi-body dynamics solver. Firstly, the kinematic parameters such as joint angles were obtained by solving inverse dynamics problem based on motion tracking data. Secondly, the kinetic parameters such as joint torques were obtained by solving control dynamics problem of making joint torque to follow pre-defined joint angle data. The results showed that mechanical loadings to major joints were reduced with lighter Soft Golf club.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.29-30
• /
• 2017

본 논문에서는 7상 BLDC 전동기를 이용한 수중 부하 시스템에서 전동기의 고속 운전 영역 확장을 위한 자동 진상각 알고리즘을 제안한다. 고속 운전 영역 운전 시 역기전력 상승에 따라 전류 지연 현상이 발생한다. 이를 보상하기 위해 기존의 제어 방식은 Look-Up Table을 이용한 진상각 방식 또는 추가적인 하드웨어를 구성하여 제어한다. 이는 운전점이 변경될 경우 제어 특성이 현저히 나빠지고, 전동기의 제정수에 의존적이고, 제어 시스템의 부피 및 비용 증가와 같은 문제를 야기 시킨다. 본 논문은 진상각 인가를 통해 확보할 수 있는 유효 전압을 계산하고 안티와인드업 출력 전압을 이용하여 필요한 진상각을 자동적으로 인가한다. 본 논문에서 제안하는 방식은 컴퓨터 시뮬레이션을 통해 비교 및 분석하였다.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.113-121
• /
• 2012

A hospital is the most important infra-facility of the places which take care of people's body in social environment. There exist several environmental factors in the ways to heal the human body in hospital ward, but this study tried to look into the improvable pleasant sickroom environment with focus on light environment among the factors. In other words, this study aims at the research on proper daylight inflow into sickroom space as basic data for understanding the link between healing environment and natural lighting. In the simulation analysis through this research, this study completed the initial simulation using Autodesk Revit 2011 with focus on two types of individual multi-bed room units of the two general hospitals located in Gwangju City. This study made a simulation analysis of The two multi-bed rooms looking to the west using the weather data on Gwangju district, which is the strong point of ECOTECT2011. Conclusively, looking into the analysis of the simulation model in time of attaching the length of in & outside light shelf, the angle controlling of light shelf, the daylight factor and DA were found to show the tendency to decrease in the numerical value due to the decrease in sunlight inflow as the simulation model moved more toward the room from the window in comparison with the existing analysis of multi-bed rooms. Particularly, this study was able to read that the daylight factor and DA were more decreasing to improve at the light shelf than the existing bedrooms; conclusively, this study judges that the natural lighting simulation analysis could be helpful in improving the healing environment as basic data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.121-128
• /
• 2021

In this paper, we propose a path generation and tracking algorithm of an unmanned air vehicle in a two-dimensional plane given the initial and final points. The path generation algorithm using the Dubins curve proposed in this work has the advantage that it can be applied in real time to an unmanned air vehicle. The path tracking algorithm is an algorithm similar to the line-of-sight induction algorithm. In order to efficiently control the direction angle, a gain related to the look ahead distance concept is introduced. Most of UAVs have the limited maximum curvature due to the structural constraints. A numerical simulation is conducted to follow the path generated by the sliding mode controller considering the angular velocity limit. The path generation and tracking performance is verified by comparing the suggested controller with conventional control techniques.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.1047-1053
• /
• 2015

A time-domain simulation tool to predict the dynamic power output of wind turbines in an offshore wind farm was developed in this study. A wind turbine model consisting of first or second order transfer functions of various wind turbine elements was combined with the Ainslie's eddy viscosity wake model to construct the simulation tool. The wind turbine model also includes an aerodynamic model that is a look up table of power and thrust coefficients with respect to the tip speed ratio and pitch angle of the wind turbine obtained by a commercial multi-body dynamics simulation tool. The wake model includes algorithms of superposition of multiple wakes and propagation based on Taylor's frozen turbulence assumption. Torque and pitch control algorithms were implemented in the simulation tool to perform max-Cp and power regulation control of the wind turbines. The simulation tool calculates wind speeds in the two-dimensional domain of the wind farm at the hub height of the wind turbines and yields power outputs from individual wind turbines. The NREL 5MW reference wind turbine was targeted as a wind turbine to obtain parameters for the simulation. To validate the simulation tool, a Danish offshore wind farm with 80 wind turbines was modelled and used to predict the power from the wind farm. A comparison of the prediction with the measured values available in literature showed that the results from the simulation program were fairly close to the measured results in literature except when the wind turbines are congruent with the wind direction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.247-254
• /
• 2010

In this paper, a new approach has been studied correcting the geometric distortion of SPOT 4 imagery. Two new equations were induced by the relationship between satellite and the Earth in the space. line-of-sight (LOS) vector adjustment model for SPOT 4 imagery was implemented in this study. This model is to adjust LOS vector under the assumption that the orbital information of satellite provided by receiving station is uncertain and this uncertainty makes a constant error over the image. This model is verified using SPOT 4 satellite image with high look angle and thirty five ground points, which include 10 GCPs(Ground Control Points) and 25 check points, measured by the GPS. In total thirty five points, the geometry of satellite image calculated by given satellite information(such as satellite position, velocity, attitude and look angles, etc) from SPOT 4 satellite image was distorted with a constant error. Through out the study, it was confirmed that the LOS vector adjustment model was able to be applied to SPOT4 satellite image. Using this model, RMSEs (Root Mean Square Errors) of twenty five check points taken by increasing the number of GCPs from two to ten were less than one pixel. As a result, LOS vector adjustment model could efficiently correct the geometry of SPOT4 images with only two GCPs. This method also is expected to get good results for the different satellite images that are similar to the geometry of SPOT images.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.332-340
• /
• 2011

A missile with a strapdown seeker should properly estimate line-of-sight(LOS) rate using its attitude information and the look angle of the seeker because LOS rate information in an inertial coordinate system, which is used for a proportional navigation(PN) homing guidance, can not be obtained directly. However, an unnecessary feedback loop(Parasite Loop) is formed in the guidance and control loop, and it may cause the guidance performance degradation or even the unstability of the system(Parasite Effect). This paper presents estimation methods for the LOS rate information and effective ways to minimize the parasite effect using Routh-Hurwitz stability criterion. Various numerical simulations are also included to verify the proposed methods.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1453-1463
• /
• 2021

Feeding is the most important behavior that represents the health and welfare of weanling pigs. The early detection of feed refusal is crucial for the control of disease in the initial stages and the detection of empty feeders for adding feed in a timely manner. This paper proposes a real-time technique for the detection and recognition of small pigs using a deep-leaning-based method. The proposed model focuses on detecting pigs on a feeder in a feeding position. Conventional methods detect pigs and then classify them into different behavior gestures. In contrast, in the proposed method, these two tasks are combined into a single process to detect only feeding behavior to increase the speed of detection. Considering the significant differences between pig behaviors at different sizes, adaptive adjustments are introduced into a you-only-look-once (YOLO) model, including an angle optimization strategy between the head and body for detecting a head in a feeder. According to experimental results, this method can detect the feeding behavior of pigs and screen non-feeding positions with 95.66%, 94.22%, and 96.56% average precision (AP) at an intersection over union (IoU) threshold of 0.5 for YOLOv3, YOLOv4, and an additional layer and with the proposed activation function, respectively. Drinking behavior was detected with 86.86%, 89.16%, and 86.41% AP at a 0.5 IoU threshold for YOLOv3, YOLOv4, and the proposed activation function, respectively. In terms of detection and classification, the results of our study demonstrate that the proposed method yields higher precision and recall compared to conventional methods.

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.131-146
• /
• 2007

Recently, the role of IT service providers has been enlarged from managing a single function or system to reconstructing entire information management processes in new ways to contribute to shareholder value across the enterprise. This movement toward extensive and complex outsourcing agreements has been driven by the assumption that outsourcing information technology functions is a reliable approach to maximizing resource productivity. Hiring external IT service providers to manage part or all of its information-related services helps a firm focus on its core business and provides better services to its clients, thus obtaining sustainable competitive advantage. This practice of focusing on the strategic aspect of outsourcing is referred to as strategic sourcing where the focus is capability sourcing, not procurement. Given the importance of the strategic outsourcing, however, to our knowledge, there is little empirical research on the relationship between the strategic outsourcing orientation and outsourcing performance. Moreover, there is little research on the factor that makes the strategic outsourcing effective. This study is designed to investigate the relationship between strategic IT outsourcing orientation and IT outsourcing performance and the process through which strategic IT outsourcing orientation influences outsourcing performance, Based on the framework of strategic orientation-performance and core competence based management, this study first identifies core competency orientation as a proper strategic orientation pertinent to IT outsourcing and IT outsourcing process management capability as the mediator to affect IT outsourcing performance. The proposed research model is then tested with a sample of 200 firms. The findings of this study may contribute to the literature in two ways. First, it draws on the strategic orientation - performance framework in developing its research model so that it can provide a new perspective to the well studied phenomena. This perspective allows practitioners and researchers to look at outsourcing from an angle that emphasizes the strategic decision making to outsource its IT functions. Second, by separating the concept of strategic orientation and outsourcing process management capability, this study provides practices with insight into how the strategic orientation can work effectively to achieve an expected result. In addition, the current study provides a basis for future studies that examine the factors affecting IT outsourcing performance with more controllable factors such as IT outsourcing process management capability rather than external hard-to-control factors including trust and relationship management. This study investigates the major factors that determine IT outsourcing success. Based on strategic orientation and core competency theories, we develop the proposed research model to investigate the relationship between core competency orientation and IT outsourcing performance and the mediating role of IT outsourcing process management capability on IT outsourcing performance. The model consists of two independent variables (core-competency-orientation and IT outsourcing process management capability), and two dependent variables (outsourced task complexity and IT outsourcing performance). Comprehensive data collection was conducted through an outsourcing association. The survey data were analyzed using a structural analysis method. IT outsourcing process management capability was found to mediate the effect of core competency orientation on both outsourced task complexity and IT outsourcing performance. Further analysis and findings are discussed.