• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.609-615
• /
• 2002

In this paper, we propose a contrast for the improvement of multi-gray scale image on display system. The proposed method distinguishes a maximum value and a minimum value in input fields or frames. By this judgement, the improvement degree of image quality is decided. This method does not require field and frame memory. Moreover, its lower hardware complexity than conventional methods make it easy to apply this method for flat panel display(FPD) which requires real-time processing. And the contrast of input gray level can be controled flexibly by varying the weight the weight value which controls the contrast range. The proposed method gives an image by controlling weighting slope selectively at intervals according to the brightness-control algorithm and the type of image in the look-up table. The function of the proposed method has been verified through Synopsys VHDL and computer simulation. And its results show that the proposed method can improve the quality of image.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.51-64
• /
• 2008

In this paper, an experiment was done where the input(scanner, digital still camera) and monitor(CRT, LCD) device used the linear multiple regression and the GOG (Gain-Offset-Gamma) characterization model to perform a color transformation. Also to color conversion method of the digital printer it used the LUT(Look Up Table), 3dimension linear interpolation and a tetrahedron interpolation method. The results are as follows. From color reappearance of digital printing case of monitor, the XYZ which it converts in linear multiple regression of input device it multiplied the inverse matrix, and then it applies the inverse GOG model and after color converting the patch of the result most which showed color difference below 5 at monitor RGB value. Also, The XYZ which is transmitted from the case input device which is a printer it makes at LAB value to convert an extreme, when the LAB value which is converted calculating the CMY with the LUT and tetrahedral interpolations the color conversion which considers the black quantity was more accurate.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.986-988
• /
• 2001

This paper presents a digitally speed sensorless control system for induction motor with direct torque control (DTC). Some drawbacks of the classical DTC are the relatively large torque ripple in a low speed range and notable current pulsation during steady state. They are reflected speed response and increased acoustical noise. In this paper, the DTC quick response are preserved at transient state, while better qualify steady state performance is produced by space vector modulation (SVM). The system are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal, model reference adaptive control (MRAC) with rotor flux linkages for the speed fuming signal at low speed range, two hysteresis controllers and optimal switching look-up table. Simulation results of the suggest system for the 2.2 [kW] general purposed induction motor are presented and discussed.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.598-601
• /
• 2006

Satellite imagery may contain large regions covered with atmospheric aerosol. A high-resolution satellite imagery affected by non-homogenous aerosol cover should be processed for land cover study and perform the radiometric calibration that will allow its future application for Korea Multi-Purpose Satellite (KOMPSAT) data. In this study, aerosol signal was separated from high resolution satellite data based on the reflectance separation method. Since aerosol removal has a good sensitivity over bright surface such as man-made targets, aerosol optical thickness (AOT) retrieval algorithm could be used. AOT retrieval using Look-up table (LUT) approach for utilizing the transformed image to radiometrically compensate visible band imagery is processed and tested in the correction of satellite scenery. Moderate Resolution Imaging Spectroradiometer (MODIS), EO-1/HYPERION data have been used for aerosol correction and AOT retrieval with different spatial resolution. Results show that an application of the aerosol detection for HYPERION data yields successive aerosol separation from imagery and AOT maps are consistent with MODIS AOT map.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.34-42
• /
• 2009

Gas turbine performance diagnostics is a method for detecting, isolating and quantifying faults in gas turbine gas path components. On-line precise fault diagnosis can promote greatly reliability and availability of gas turbine in real time operation. This work proposes a GUI-type on-line diagnostic program using SIMULINK and Fuzzy-Neuro algorithms for a helicopter turboshaft engine. During development of the diagnostic program, a look-up table type base performance module are used for reducing computer calculating time and a signal generation module for simulating real time performance data. This program is composed of the on-line condition monitoring program to monitor on-line measuring performance condition, the fuzzy inference system to isolate the faults from measuring data and the neural network to quantify the isolated faults. Evaluation of the proposed on-line diagnostic program is performed through application to the helicopter engine health monitoring.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1216-1221
• /
• 2005

The GPS software receiver based on the SDR(Software Defined Radio) technology provides the ability to easily adopt other signal processing algorithms without changing or modifying the hardware of the GPS receiver. However, it is difficult to implement the GPS software receiver using a commercial processor because of heavy computation load for processing the GPS signals in real time. This paper proposes an efficient GPS signal processing scheme and correlator structure to reduce the computation load for processing the GPS signal in the GPS software receiver, which uses a patterned look-up table method to generate the correlation value between the GPS signals and the replica signals. In this paper, it is explained that the computation load of the proposed scheme is much smaller than that of the previous GPS signal processing scheme. Finally, the processing time of the proposed scheme is compared with that of the previous scheme, and the improvement is shown from the viewpoint of the computation load.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2000

In this paper, we discuss a symbol clock extraction scheme based on maximizing the band-edge component of the transmitted signal frequency spectrum for applications to 51.84Mbps VDSL system which uses a 16-QAM. The major characteristics of the digital PLL are examined. In addition, we suggest an efficient design method of a sinusoidal look-up table which is used for NCO.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.271-274
• /
• 1998

Ultrasonic sensors are becoming indispensable components in every sector of automation equipments due to many advantages. But the main purposes of the noncontact sensing device are rather narrowly confined within object detection and distance measurement. To widen the realm of the applications to object recognition, ultrasonic sensors need to improve the recognition resolution to a certain amount. To resolve the problem of spatial resolution restriction, an increased number of the sensors in the forms of a linear array or 2-dimensional array of the sensor has been used. Also better resolution has been obtained by shifting the array in several steps using mechanical actuators. For an object recognition using ultrasonic sensors, measurements of distance, shift, oblique angle in certain ranges should be obtained. But a little attention has been paid to the measurement of angles. In this paper we propose a practical method for an object angular value detection in addition to distance measurement in ultrasonic sensor array system with little additional hardware burden. Using the established measurement look-up table for the variations of distance, shift, angle and transmitter voltages for each sensor characteristics, a set of different return echo signals for adjacent receivers are processed to provide enhanced angular value reading for an object.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.1
• /
• pp.1-9
• /
• 2014

This paper proposes a low-latency Sample Adaptive Offset filter (SAO) architecture and its Single Instruction Multiple Data (SIMD) optimization scheme to achieve fast High Efficiency Video Coding (HEVC) decoding in a multi-core environment. According to the HEVC standard and its Test Model (HM), SAO operation is performed only at the picture level. Most realtime decoders, however, execute their sub-modules on a Coding Tree Unit (CTU) basis to reduce the latency and memory bandwidth. The proposed low-latency SAO architecture has the following advantages over picture-based SAO: 1) significantly less memory requirements, and 2) low-latency property enabling efficient pipelined multi-core decoding. In addition, SIMD optimization of SAO filtering can reduce the SAO filtering time significantly. The simulation results showed that the proposed low-latency SAO architecture with significantly less memory usage, produces a similar decoding time as a picture-based SAO in single-core decoding. Furthermore, the SIMD optimization scheme reduces the SAO filtering time by approximately 509% and increases the total decoding speed by approximately 7% compared to the existing look-up table approach of HM.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.105-111
• /
• 2010

In this paper the elasticity of fault-detection algorithm based on fuzzy logic is proposed through lots of experiments, justifying its validity. The four mathematical morpholgical operators was defined to detect the cracks. The cracks was detected via center of area method with ${\lambda}$-fuzzy measure of fuzzy sets. However generally favorable, the result owes to how adequate the lighting device is designed in case of the so far fine crack of pieces. In an attempt to improve the response of the system, It is designed to minimize the use of memory via LookUp table in software.