• 생약학회지
• /
• 제2호2호
• /
• pp.99-118
• /
• 1971

The flora of Mt. Du Ryun were investigated by the authors from November 3, 1955 to July 21, 1970. 1) Mt. Du Ryun is located at Heanam-Gun, Junla-Nam Do, Korea (between longitude $126^{\circ}\;35'\;E$ and $126^{\circ}40'{\;}E$, and between $34^{\circ}25'$ N.L. and $34^{\circ}30'$ N.L. on the latitude.). Average temperature is $14.1^{\circ}C$, and precipitation per annum 1,488.7mm. 2) On the whole, the observed floral region consisted of 5 formas, 56 varieties, 770 species, 440 genera, 159 families, in 86 orders. 3) The medicinal plants in the area include 321 species, 242 genera and 120 families. 4) The region includes 2 formas, 7 varieties, 30 species in 24 families of evergreen trees. It was pointed out that this area is a typical warm zone in the Korean flora.

• 항공우주시스템공학회지
• /
• 제3권4호
• /
• pp.35-40
• /
• 2009

The first purpose of this study is to develop a GCS(Ground Control System) by using RF(Radio Frequency) wireless communication equipments for UAV(Unmanned Aerial Vehicle). The second goal is to develop an antenna tracking system operating automatically. UAV receives flight data from a RF wireless system. So the role of antenna tracking system is very important to keep good communication state between UAV and GCS. GCS can check flight data and display a aviation state of UAV in real-time. The flight data displayed in real-time by GCS include the latitude, longitude, altitude, speed and so on. Experiments that measure a communication range and reliability are needed to develop a RF wireless communication system.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권3호
• /
• pp.257-269
• /
• 2023

This paper presents a method for detecting faults in data obtained from the Automatic Identification System (AIS) of surface vessels. The data include latitude, longitude, Speed Over Ground (SOG), and Course Over Ground (COG). We derive two methods that utilize two models: a constant state model and a derivative augmented model. The constant state model incorporates noise variables to account for state changes, while the derivative augmented model employs explicit variables such as first or second derivatives, to model dynamic changes in state. Generally, the derivative augmented model detects faults more promptly than the constant state model, although it is vulnerable to potentially overlooking faults. The effectiveness of this method is validated using AIS data collected at a harbor. The results demonstrate that the proposed approach can automatically detect faults in AIS data, thus offering partial assistance for enhancing navigation safety.

• 한국정밀공학회지
• /
• 제4권4호
• /
• pp.56-71
• /
• 1987

Determination of navigation variables (latitude, longitude, and altitude) near the earth's surface is termed 'Terrestrial Navigation'. The quantities that are measured inertially are the total acceleration (or the integral fo this acceleration over a fixed time interval) and the total angular rate (or the integral of this angular rate over the same time interval). These measurements when suitably compensated can be manipulated to yield the navigation variables. Hence, it is essential that the initial values of position, orientation and velocity are accurately set up during the initial alignment process. Initial alignment of gimballed inertial navigation system ( GINS) is accomplished by gyrocompassing techniques. These cannot be used, in the case of strapdown inertial navigation system(SDINS), where the inertial instruments are directly strapped down to a vehicle frame. The basic objective of this paper is the development of digital method for the determination of the initial axes erection of a SDINS from vibration and sway currupted data on the launch pad.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.43-50
• /
• 2010

The 200mesh screen was tensioned and fixed on a frame. When applied tension to 5N and 10N per unit area, a side length of opening of the screen was 163.223${\mu}m$ and 168.224${\mu}m$, respective. But side length not tensioned was 158.879${\mu}m$. We knew that a side length of opening of the screen rarely changes with tension applied to the screen. The appearances that a side length of opening of the screen expand little are due to a decreasing diameter of thread by means of tension. In a thickness measurement of screen, While the high density mesh screen that had a lot of knots that crossed a line of latitude and longitude per unit area appeared a higher numerical value, the low density mesh screen that had a few knots appeared a low numerical value.

• 천문학회보
• /
• 제35권1호
• /
• pp.66.2-66.2
• /
• 2010

We have studied the properties of interstellar turbulence as observed by Boston University-Five College Radio Astronomy Observatory (BU-FCRAO) Galactic Ring Survey (GRS). This observation uses 13CO J=$1{\rightarrow}0$ emission with high spectral resolution of 0.21 kms-1 and covers wide galactic plane regions ($18^{\circ}$ < 1 < $55.7^{\circ}$ and -1 < b < $1^{\circ}$). Firstly, we measured the one dimensional power spectrum of 13CO intensity along the galactic longitude and along the galactic latitude. We found the slope of the power spectrum changes around the molecular ring structure and the center of the galactic plane. Secondly, we explored how the power spectral slope is related with the velocity dispersion of supersonic giant molecular clouds in the GRS. Finally, we suggest the turbulent nature of the interstellar medium is connected with star formation activities in spiral arms.

• 천문학회지
• /
• 제29권2호
• /
• pp.217-221
• /
• 1996

We have examined morphological change and movements of individual sunspots within a sunspot group in association with a large solar flare activity (3B/X1.5) appeared on 13 May 1981. For this purpose we measured distance among spots during the period before and after the flare activity and estimated the average velocity of their movement. Our main results are as follows: (1) The longitudinal displacement among sunspots are generally greater than the latitudinal displacement. (2) During the period the spots moved with an average velocity of 1.2 km/s in longitude and 0.86 km/s in latitude. (3) The most notable change took place in the central part placed between the two ribbons of the flare.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.163-168
• /
• 2015

In order to integrate high wind generation resources into power grid, it is an essential to predict power outputs of wind generating resources. As wind farm outputs depend on natural wind resources that vary over space and time, spatial modeling based on geographic information such as latitude and longitude is needed to estimate power outputs of wind generation resources. In this paper, we introduce the basic concept of spatial modeling and present the spatial prediction model based on Kriging techniques. The empirical data, wind farm power output in Texas, is considered to verify the proposed prediction model.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.86-88
• /
• 2007

In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through the new coordinates transformation calculating the height and azimuth of the sun.