• 제목/요약/키워드: Long cycle life

검색결과 480건 처리시간 0.033초

방목초지에서 가축 배설분과 분충류의 분포에 관한 연구 (Studies on Distribution of Dung Beetles and Livestock Dung in Grazing Pasture)

  • 김맹중;육완방;임영철;윤세형;김종근;서성;이상무
    • 한국초지조사료학회지
    • /
    • 제25권1호
    • /
    • pp.51-56
    • /
    • 2005
  • The dung beetle species living in grazing pasture in Korea and their life cycle such as characteristics of habitation and hibernation were investigated for five year. Eleven species belonging to five genera of dung beetles were found in the grazing pasture. They started to appear around the middle of April when grazing begins on pasture. Dung booties kept on laying eggs until the beginning of August and maintained their activity until the end of October. They passed the winter as a form of an imago twenty five to thirty centimeters under the ground. Loamy soil and sandy soil containing plenty of humus were prefered as a hibemaculum by them. Five genera of dung beetles. Aprodius spp, Onthophagus spp., Liatongus spp., Copris spp., Scarabaeus spp. were found and observed in s study. Three species of them like Scarabaeus affinis had more an twenty eight millimeter long body, and the body length of five species like Copris tripartitus were between ten and twenty millimeters. Three species of them like Apodius sublimbatus were had the body length of less than ten millimeters. The results of indoor experiments to study propagation power of dung beetle showed that the optimum temperature for propagation of Copris ochus and Copris tripartitus were between twenty and thirty degrees and the lowest temperature for living of dung beetle was eighteen degrees while e highest temperature being thirty five degrees. A light did not effect the propagation power of dung beetles.

기계적합금화된 분산형 Al-4Mg기 합금의 피로거동 (The Fatigue Behavior of Mechanically Alloyed Al-4Mg Alloys Dispersed with Oxide Particles)

  • 편정우;조준식;권숙인;조윤성
    • 열처리공학회지
    • /
    • 제6권4호
    • /
    • pp.237-242
    • /
    • 1993
  • The fatigue behaviors of mechanically alloyed Al-4Mg alloys dispersed with either $Al_2O_3$ or $MgAl_2O_4$ oxide particles were investigated. This study maily concerned with the role of coherency of dispersed particles with the matrix on the fatigue behavior of the alloys. The $MgAl_2O_4$ which has a spinel structure with the lattice parameter of exactly the twice of Al showed the habit relation with the matrix. The mechanically alloyed Al-4Mg alloys showed stable stress responses with fatigue cycles from start to failure regadless of strain amplitudes and of existence of dispersoids. The Al-4Mg alloy dispersed with $MgAl_2O_4$ showed not only the better static mechanical properties but also the better low cycle fatigue resistance than that with $Al_2O_3$, i.e., much higher plastic strain energy dissipated to failure, at low strain amplitude. However, this alloy showed inferior fatigue resistance to that dispersed with $Al_2O_3$ or that without dispersion at high strain amplitude. These results imply that $MgAl_2O_4$ may promote lowering the stacking fault energy of the alloy inherited from the coherency with the matrix so that dislocations shuttle back and forth on the same slip plane without cross slipping to other planes during fatigue at low strain amplitude resulting in long fatigue life.

  • PDF

국내 전력거래제도하에서 IGCC 사업성 확보를 위한 정책 제언 (A Study on the Feasibility of IGCC under the Korean Electricity Market)

  • 고경호
    • 한국수소및신에너지학회논문집
    • /
    • 제22권1호
    • /
    • pp.118-127
    • /
    • 2011
  • An IGCC was evaluated as one of the next generation technologies that would be able to substitute for coal-fired power plants. According to "The 4th Basic Plan of Long-term Electricity Supply & Demand" which is developed by the Electricity Business Acts, the first IGCC will be operated at 2015. Like other new and renewable energy such as solar PV, Fuel cell, The IGCC is considered as non-competitive generation technology because it is not maturity technology. Before the commercial operation of an IGCC in our electricity market, its economic feasibility under the Korean electricity market, which is cost-based trading system, is studied to find out institutional support system. The results of feasibility summarized that under the current electricity trading system, if the IGCC is considered like a conventional plant such as nuclear or coal-fired power plants, it will not be expected that its investment will be recouped within life-time. The reason is that the availability of an IGCC will plummet since 2016 when several nuclear and coal-fired power plants will be constructed additionally. To ensure the reasonable return on investment (NPV>0 IRR>Discount rate), the availability of IGCC should be higher than 77%. To do so, the current electricity trading system is amended that the IGCC generator must be considered as renewable generators to set up Price Setting Schedule and it should be considered as pick load generators, not Genco's coal fired-generators, in the Settlement Payment.

토마토녹응애의 형태, 생태 및 방제 (Morphology, Biology and Chemical Control of Tomato Russet mite, Aculops lycopersici Massee (Acari: Eriophyidae) in Korea)

  • 김동근;박덕기;김승한;박인숙;최성국
    • 한국응용곤충학회지
    • /
    • 제41권4호
    • /
    • pp.255-261
    • /
    • 2002
  • 토마토녹응애(개칭)에 대해 주사전자현미경 관찰, 국내 분포, 기주식물, 온도에 따른 발육상, 약제 방제법에 관하여 연구하였다. 토마토녹응애는 2쌍의 다리를 가진 길이 $134.9\mu\textrm{m}$의 미소동물로 feathered claw는 4줄이었다. 피해증상으로, 피해엽은 적갈색으로 변하고 줄기에는 털이 없어지고 광택이 나거나 표면이 그물형으로 갈라지며, 새순은 시들거나 위축된다. 과일은 과경 부근에 그을음이나 녹이 긴 것 같이 되고, 그물형으로 갈라진다. 충남의 부여와 유성, 강원도 평창, 경북의 칠곡, 구룡포의 유리온실에서 발견되었으며, 한국에서 기주로는 메꽃, 까마중, 가지, 꽈리, 나팔꽃, 페투니아, 감자, 고추, 담배, 토마토 등이 확인되었다. 이 응애는 $15-30^{\circ}C$에서 발육이 가능하였고, 한 세대는 6-11일로 높은 온도일수록 발육기간이 짧아지는 경향이었으며, 암컷이 수컷보다 수명이 길었는데, 25-28$^{\circ}C$에서 12일로 가장 수명이 길었다. 살비제 중에서 fenazaquin과 cypermethrin의 효과가 가장 좋았다.

Effects of porcine testis extract on wound healing in rat

  • Lee, Dong-Mok;Bhat, Abdul Roouf;Kim, Yong-Woon;Shin, Dong Hoon;Kim, Joo-Young;Kim, Keuk-Jun;Lee, Ki-Ho;Cheon, Yong-Pil;Chun, Taehoon;Choi, Inho
    • Animal cells and systems
    • /
    • 제16권6호
    • /
    • pp.469-478
    • /
    • 2012
  • Sex hormones have long been considered to play an important role in bone turnover rate, periodontal diseases, and wound healing. We have studied the effect of porcine testis steroid extract (PTSE), an extract of porcine testes, which holds a good ratio of 19-nortestosterone (nandrolone), testosterone, androstenedione, $17{\beta}$-estradiol, and estrone, on the healing rate of a standardized full-thickness linear wound on the back of the rat. Skin punch or carbon dioxide ($CO_2$) laser methods were used to create the deep skin injury in two groups of animals. The animals were treated with the PTSE cream, control cream and Vaseline (control) to find out the effect in re-epithelialization, contraction, and formation of granulation and scar tissues. Histological examination after 21 days showed 100, 87.4, and 80.5% recovery of epidermis, dermis, and hypodermis, respectively in the PTSE-treated animals. Similarly, on the 15th day of treatment, complete healing of intact skin was observed in the PTSE cream-treated animals among the laser radiation group. Even though the beginning of re-epithelialization phase and completion of serum crust formation was also observed in the base cream- and Vaseline-treated animals respectively, the complete healing cycle was observed only in the PTSE-treated group. The white blood cell count in the PTSE-treated group showed that PTSE cream is nontoxic to animals.

도상 및 노반상태 평가를 통한 궤도유지보수작업의 적정성 연구 (Study on the Appropriateness of Track Maintenance Works through the Evaluation of Trackbed Conditions)

  • 김대상;권순섭;이수형;황선근;박태순
    • 한국철도학회논문집
    • /
    • 제11권3호
    • /
    • pp.334-341
    • /
    • 2008
  • 자갈궤도는 압축성 재료인 자갈과 흙을 기초로 하여 건설되므로 공용 기간 중 승차감을 확보하고 수명연장을 위해서는 유지보수작업이 필수적이다. 현재 수행되고 있는 자갈궤도에 대한 유지보수 작업은 EM120 검측차를 이용한 궤도틀림 측정 결과로부터 결정된다. 궤도틀림은 궤도에 변형이 발생된 결과를 측정하는 것으로, 궤도틀림을 유발시키는 근본적인 원인을 평가해 볼 필요가 있다. 본 연구에서는 궤도틀림의 원인이 궤도를 지지하는 도상과 노반에 있다고 판단하고, 도상 및 노반의 싱태를 평가할 수 있는 비파괴탐사법 (GPR4과 PFWD)을 개발하고 이를 경부선 500m구간에 적용하였다. 개발 작용된 방법은 층 두께 평가법과 궤도수직강성 평가법 및 도상 노반 시추법이다. 도상 및 노반 상태평가 결과를 기 수행된 궤도틀림 검측결과 및 유지보수작업과 비교함으로서 불필요한 유지보수작업 구간을 평가하였다.

독립형 태양광 발전 시스템의 무정전 전력공급을 위한 시스템 용량 최적 선정에 관한 연구 (A Study on the Optimal System Sizing of the Standalone Photovoltaic Power Generation System for Uninterruptible Power Supply)

  • 김기영;최우진
    • 전력전자학회논문지
    • /
    • 제23권2호
    • /
    • pp.77-85
    • /
    • 2018
  • Renewable energy has been increasingly used and widely acclaimed as one of the solutions to rampant environmental problems. Among numerous kinds of renewable sources, the penetration rate of the PV system is relatively higher than that of others due to ease of installation. However, one disadvantage of the PV system is its dependence on weather condition. The PV system is especially critical when it is used for standalone systems because it cannot operate when the power generated from a PV module is not enough. Therefore, PV systems are often used with an energy storage system, such as batteries, to store backup energy when the weather condition is insufficient to supply power to the system. Blackout time can be reduced by increasing the size of the energy storage system, but it is a trade-off with system cost. In this work, optimal sizing of a standalone PV system is proposed to supply power to the system without blackout. The sizing of PV modules and batteries is performed by a simulation based on actual irradiation data collected during the past five years. The Life cycle costing of each system is evaluated to determine an optimal set of PV modules and batteries among several different combinations. The standalone PV system designed by the proposed method can supply power to the system with no interruption as long as the weather condition is similar to those of the past five years.

A Review on the Photochemical Oxidant Modeling as Applied to Air Quality Studies in Complex Terrain

  • Lee Hwa-Woon;Kim Yoo-Keun;Won Gyeong-Mee;Park Jong-Kil
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제1권1호
    • /
    • pp.19-33
    • /
    • 1997
  • The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorological processes. In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification process through observation is emphasized.

  • PDF

공공임대주택 단위 수선비용 특성 분석 (The Characteristics of the Repair Unit Cost in Public Rental Housing)

  • 이강희;채창우
    • KIEAE Journal
    • /
    • 제14권5호
    • /
    • pp.103-109
    • /
    • 2014
  • Apartment housing should require the systematic maintenance to provide the decent living condition during its life. Each household should participate the maintenance activities and pay for the repair. Therefore, the required cost for repair would be needed to plan in the repair schedule because each household could not pay the much repair money at a time. After apartment constructed, a long term repair plan would be prepared in repair time, repair scope and a required cost. A few studies are said that the repair cost depends on the building deterioration, elapsed year and management factors. The above factors are not be certain to affect the repair management while it may be important to prepare the required money and the repair time. In this paper, it aimed at analyzing the correlation between the repair management and the management factors, especially total area, number of household. This would educe the unit cost per number of household and management area in the individual boiler and elevator with full change and full repair. The unit cost per number of household and area for full change are about 199,000 won/household and $1,954won/m^2$ in the individual boiler respectively. The unit cost of the elevator for full change is 94,000 won/household and $5,429won/m^2$ respectively. Second, this study shows that the elapsed year after construction would not be related the repair unit cost.

리튬이온 커패시터의 음극도핑 및 전기화학특성 연구 (Study on the Electrochemical Characteristics of Lithium Ion Doping to Cathode for the Lithium Ion Capacitor)

  • 최성욱;박동준;황갑진;유철휘
    • 한국수소및신에너지학회논문집
    • /
    • 제26권5호
    • /
    • pp.416-422
    • /
    • 2015
  • Lithium Ion capacitor (LIC) is a new storage device which combines high power density and high energy density compared to conventional supercapacitors. LIC is capable of storing approximately 5.10 times more energy than conventional EDLCs and also have the benefits of high power and long cycle-life. In this study, LICs are assembled with activated carbon (AC) cathode and pre-doped graphite anode. Cathode material of natural graphite and artificial graphite kinds of MAGE-E3 was selected as the experiment proceeds. Super-P as a conductive agent and PTFE was used as binder, with the graphite: conductive agent: binder of 85: 10: 5 ratio of the negative electrode was prepared. Lithium doping condition of current density of $2mA/cm^2$ to $1mA/cm^2$, and was conducted by varying the doping. Results Analysis of Inductively Coupled Plasma Spectrometer (ICP) was used and a $1mA/cm^2$ current density, $2mA/cm^2$, when more than 1.5% of lithium ions was confirmed that contained. In addition, lithium ion doping to 0.005 V at 10, 20 and $30^{\circ}C$ temperature varying the voltage variation was confirmed, $20^{\circ}C$ cell from the low internal resistance of $4.9{\Omega}$ was confirmed.