• Elastomers and Composites
• /
• v.44 no.1
• /
• pp.63-68
• /
• 2009

Recently, much attention has focused on the permanent deformation of roads in hot summer and cracks in cold winter, which are detrimental to safe driving. This leads to necessity of modification of asphalt to resist those deformation. In this study, a type of modified asphalt was prepared by addition of a photoinitiator which is activated by ultraviolet lay. The mechanical and rheololgical properties of photoinitiator-modified asphalt were examined using UTM and rheometer. Results showed that the modified asphalt was effected by ultraviolet and thus tensile strength and storage modulus increased, due to molecular attraction, with initiator content and irradiation dose. Thermal analysis showed less weight loss upon photoinitiator-modification and this indicated that the molecular attraction is the result of cross linking reaction between asphalt molecules induced by photoinitiator. According to long term ultraviolet curing test, properties of the photoinitiator-modified asphalt did not decrease or even increase for 20 years. This indicates that useful life of the asphalt could be extended by addition of photoinitiator.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.217-222
• /
• 2010

Paved roads are suffered from the permanent plastic deformation in hot summer and cracks in cold winter, which are detrimental to safe driving. This leads to necessity of modification of asphalt to resist those deformation. In this study, two kinds of modifiers were examined; organic polymers and a photoinitiator which is activated by ultraviolet lay. The mechanical and rheololgical properties of modified asphalts were examined using UTM and rheometer. Results showed that the properties were varied depending on the types of polymer and irradiation time. UV irradiation increased the tensile strength and storage modulus of thermoplastic polymer-modified asphalt, however UV was not effective on thermoset polymer. According to long term ultraviolet curing test, properties of the polymer/photoinitiator-modified asphalt did not decrease, but rather increase for 20 years. This indicates that the useful life of the asphalt could be extended by addition of photoinitiator.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.151-156
• /
• 2017

Along with developments in technology, National Competency Standards(NCS) education is rising as the new paradigm of change in university education. This study has the purpose of empirically investigating the factors on satisfaction of students before and after application of NCS. The SPSS 22.0 statistics program was applied for the frequency analysis, reliability analysis and t-test. The results and implications by analysis are as follows. First, academic environment and after application of NCS have statistically significant positive influence. Second, From general situation attribute, before application of NCS positively(+) influences regret to university life. It allowed for the developed application of NCS. Third, social satisfaction and after application of NCS were shown to the major variable except long for home characteristics. Through these, this paper suggest to reinforce NCS application. So I recommend that future researches should expand variable samples.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.979-985
• /
• 2011

This paper includes that there are results of designing the flash hider and analyzing fluid dynamics of a front area of the barrel to shorten the length of small arms. Generally, the muzzle flash can be generated out of the barrel by the reaction between the oxygen in the air and unburned gunpowder contained in the propellant gas if a barrel is not long enough to burn gunpowder fully inside of the barrel. Though, the hugh muzzle flash, which is a characteristic of small arms with short barrel length, caused a soldier to aim at the target at night by making the soldier blind for a while and endangers his life by revealing firing position to enemies. Besides, the heat of muzzle flash can weaken the performance of thermal sights, which are attached to small arms for night battlefield. In this paper, flash hiders with several different shapes were designed for a newly developed 5.56mm caliber rifle with short barrel length. The performance of each flash hider to reduce the muzzle flash was compared theoretically and experimentally. Through the authorized test procedure, a highly efficient design of flash hider for reducing the muzzle flash was identified. The result of the paper can be helpful when designing flash hiders for small arms with short barrel length.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.6
• /
• pp.634-642
• /
• 2016

Chinese cabbage is produced and consumed as a main material for kimchi and as a staple vegetable in Korea throughout the year. However, due to environmental changes unbalance between supply and demand is repeated annually, requiring development of long-term storage technologies. Chinese cabbages, were harvested, put in plastic boxes, and precooled at $2^{\circ}C$ for 24 hours using forced air precooler. After precooling, Chinese cabbages were MAP-treated with 0.02 mm HDPE film and functional film and stored at low temperature ($1{\pm}0.5^{\circ}C$). The weight-loss rates after 9-weeks of storage were 8.47% in the control group, 4.07% in the HDPE film-treated group, and 3.07% in the functional film-treated group, respectively, suppressing weight loss. Trimming loss rate after 6-weeks of storage was 6.86% in the functional film MAP-treated group and lower than 7.50% in the control group. In the sensory test with 7 points as the limit of commodity, the control group lost it after 6-weeks of storage while the MAP-treated groups retained over 7 points. The functional film MAP-treated group showed over 6 points for processing as kimchi until 9-weeks of storage, proving that Pallet-type MAP storage is effective for extending storage life of spring Chinese cabbage.

• Toxicological Research
• /
• v.35 no.2
• /
• pp.119-129
• /
• 2019

As the use of cosmetics has greatly increased in a daily life, safety issues with cosmetic ingredients have drawn an attention. Drometrizole [2-(2'-hydroxy-5'-methylphenyl)benzotriazole] is categorized as a sunscreen ingredient and is used in cosmetics and non-cosmetics as a UV light absorber. No significant toxicity has been observed in acute oral, inhalation, or dermal toxicity studies. In a 13-week oral toxicity study in beagle dogs, No observed adverse effect level (NOAEL) was determined as 31.75 mg/kg bw/day in males and 34.6 mg/kg bw/day in females, based on increased serum alanine aminotransferase activity. Although drometrizole was negative for skin sensitization in two Magnusson-Kligman maximization tests in guinea pigs, there were two case reports of consumers presenting with allergic contact dermatitis. Drometrizole showed no teratogenicity in reproductive and developmental toxicity studies in which rats and mice were treated for 6 to 15 days of the gestation period. Ames tests showed that drometrizole was not mutagenic. A long-term carcinogenicity study using mice and rats showed no significant carcinogenic effect. A nail product containing 0.03% drometrizole was nonirritating, non-sensitizing and non-photosensitizing in a test with 147 human subjects. For risk assessment, the NOAEL chosen was 31.75 mg/kg bw/day in a 13-week oral toxicity study. Systemic exposure dosages were 0.27228 mg/kg bw/day and 1.90598 mg/kg bw/day for 1% and 7% drometrizole in cosmetics, respectively. Risk characterization studies demonstrated that when cosmetic products contain 1.0% of drometrizole, the margin of safety was greater than 100. Based on the risk assessment data, the MFDS revised the regulatory concentration of drometrizole from 7% to 1% in 2015. Under current regulation, drometrizole is considered to be safe for use in cosmetics. If new toxicological data are obtained in the future, the risk assessment should be carried out to update the appropriate guidelines.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.75-84
• /
• 2018

This study analyzed users' acceptance and intention to use in addition to needs and preferences of smart home technologies, and identified the differences in technology preference and acceptance by different factors. The subjects were residents in the 40s and 60s residing in the Seoul or suburbs of Seoul, and questionnaires were conducted in the 40s while interviews with questionnaires were conducted in the 60s. A total of 105 questionnaires were used as data, and frequency, mean, crossover, independent sample t test, one-way ANOVA and multiple regression analysis were performaed using SPSS23. The results of this study are as follows. First, hypertension, hyperlipidemia and hypercholesterolemia were the most common diseases among respondents and if there was no discomfort, they would like to continue living in the homes of the current residence. Therefore, the direction of smart home development should support the daily living and health care so that residents can live a healthy life for a long time in their living space. Second, the technologies that residents most need were a control technology of residential environments and a monitoring technology of residents' health and physiological changes. The most preferred sensor types are motion sensors and speech recognition while video cameras have a very low preference. Third, technology anxiety was the most significant factor influencing intention to accept smart home technology. The greater the technology anxiety is, the weaker the acceptance of technology. Fourth, when applying smart residential technology in homes, various resident characteristics should be considered. Age and technology intimacy were the most influential variables, and accordingly there were differences in technology preference and acceptance. Therefore, a user-friendly smart home plan should be done in the consideration of the results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.73-78
• /
• 2020

Musculoskeletal disease is often caused by sitting down for long period's time or by bad posture habits. In order to prevent musculoskeletal disease in daily life, it is the most important to correct the bad sitting posture to the right one through real-time monitoring. In this study, to detect the sitting information of user's without any constraints, we propose posture measurement system based on multi-channel pressure sensor and CNN model for classifying sitting posture types. The proposed CNN model can analyze 5 types of sitting postures based on sitting posture information. For the performance assessment of posture classification CNN model through field test, the accuracy, recall, precision, and F1 of the classification results were checked with 10 subjects. As the experiment results, 99.84% of accuracy, 99.6% of recall, 99.6% of precision, and 99.6% of F1 were verified.

• Journal of Pharmacopuncture
• /
• v.27 no.2
• /
• pp.70-81
• /
• 2024

Objectives: Cognitive impairments, ranging from mild to severe, adversely affect daily functioning, quality of life, and work capacity. Despite significant efforts in the past decade, more than 200 promising drug candidates have failed in clinical trials. Herbal remedies are gaining interest as potential treatments for dementia due to their long history and safety, making them valuable for drug development. This review aimed to examine the mechanisms behind the effect of Polygonum multiflorum on cognitive function. Methods: This study focused primarily on the effects of Polygonum multiflorum and its chemical constituents on cognitive behavioral outcomes including the Morris water maze, the passive avoidance test, and the Y maze, as well as pathogenic targets of cognitive impairment and Alzheimer's disease (AD) like amyloid deposition, amyloid precursor protein, tau hyperphosphorylation, and cognitive decline. Additionally, a thorough evaluation of the mechanisms behind Polygonum multiflorum's impact on cognitive function was conducted. We reviewed the most recent data from preclinical research done on experimental models, particularly looking at Polygonum multiflorum's effects on cognitive decline and AD. Results: According to recent research, Poligonum multiflorum and its bioactive components, stilbene, and emodin, influence cognitive behavioral results and regulate the pathological target of cognitive impairment and AD. Their mechanisms of action include reducing oxidative and mitochondrial damage, regulating neuroinflammation, halting apoptosis, and promoting increased neurogenesis and synaptogenesis. Conclusion: This review serves as a comprehensive compilation of current experiments on AD and other cognitive impairment models related to the therapeutic effects of Polygonum multiflorum. We believe that these findings can serve as a basis for future clinical trials and have potential applications in the treatment of human neurological disorders.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.53.1-53.15
• /
• 2023

Background: Plastics are high-molecular-weight materials composed of long carbon chains. They are prevalent in daily life, present in various items such as food containers and microwavable packaging. Phthalates, an additive used to enhance their flexibility, are endocrine-disrupting chemicals. We utilized the data from the Korean National Environmental Health Survey (KoNEHS) cycle 3, representing the general South Korean population, to investigate the relationship between the use of plastics in refrigerator food storage and phthalate exposure. Methods: We assessed 3,333 adult participants (aged ≥ 19 years) including 1,526 men and 1,807 women, using data from KoNEHS cycle 3. Using the 75th percentile concentration, urine phthalate metabolites were categorized into high and low-concentration groups. χ² test was conducted to analyze variations in the distribution of each variable, considering sociodemographic factors, health-related factors, food intake, the use of plastics, and the concentration of urine phthalate metabolites as the variables. To calculate odds ratios (ORs) for the high-concentration group of urine phthalate metabolites based on the use of plastics in refrigerator food storage, logistic regression analysis was conducted. Results: In men, the use of plastics in refrigerator food storage had significantly higher adjusted ORs compared to those using the others. The adjusted ORs were calculated as follows: mono-(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP) had an OR of 1.35 (95% confidence interval [CI]: 1.05-1.72), mono-(2-ethyl-5-oxohexyl) phthalate (MEOHP) had an OR of 1.48 (95% CI: 1.16-1.88), mono-(2-ethyl-5-carboxypentyl) phthalate (MECPP) had an OR of 1.32 (95% CI: 1.04-1.66), ∑di(2-ethylhexyl) phthalate (∑DEHP) had an OR of 1.37 (95% CI: 1.08-1.74) and mono-n-butyl phthalate (MnBP) had an OR of 1.44 (95% CI: 1.13-1.84). Conclusion: The concentrations of urine phthalate metabolites (MEHHP, MEOHP, MECPP, ∑DEHP, and MnBP) were significantly higher in men who used plastics in refrigerator food storage compared to those using the others.