• 한국군사과학기술학회지
• /
• 제12권2호
• /
• pp.146-151
• /
• 2009

It is known that muzzle flash can be generated by the reaction between the oxygen in the air and unburned gunpowder contained in the propellant gas if a barrel is not long enough to burn gunpowder fully inside of the barrel. A hugh muzzle flash, which is a characteristic of small arms with short barrel length, disturbs a shooter in aiming at the target at night by making the shooter blind for a while and endangers the shooter's life by revealing firing position to enemies. In addition, the heat of muzzle flash can deteriorate the performance of thermal sights, which are attached to small arms for effective night combat. In this paper, flash suppressors of different shapes were designed for a newly developed 5.56mm caliber rifle with short barrel length and the performance of each flash suppressor to reduce the muzzle flash was compared by on-site test firing. Through the test firing, a highly efficient design of flash suppressor for reducing the muzzle flash was identified. The result of the paper can be referred when designing flash suppressors for small arms with short barrel length.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.79-84
• /
• 2009

Super duplex stainless steel has long life in severe environments by showing the enough strength and corrosion resistance. Therefore, the fracture mechanics approach needs to support the structural strength integrity for the used material. In this study, fatigue crack propagation behavior was investigated to super duplex stainless steel with 0.2% nitrogen. The various volume fraction and distribution of austenite structure for applied specimen in test were obtained by changing the heat treatment temperature and cycle. From test results, fatigue crack propagation rate showed two kinds of tendency between da/dN and ${\Delta}K$ according to distribution of austenite structure and structure anisotropy.

• 한국식품조리과학회지
• /
• 제20권5호
• /
• pp.462-467
• /
• 2004

This study was carried out to improve the qualities and extend the shelf life of Yukwa and Salyeotgangjung, traditional Korean cookies, using fine hot salt instead of oil as the popping medium. The Yukwa and Salyeotgangjung that had been popped using fine salt were stored at 25\ulcornerfor one or two months, and then compared their sensory evaluation, lipid contents and acid and peroxide values with those popped in oil. In the sensory test, the Yukwa base and popped rice expanded in the salts and stored for one month were preferred to those expanded in oil with regard to flavor and overall acceptability. With respect to the whiteness, off-flavor, and crispness, these properties those expanded in salt had stronger whiteness and crispness but a weaker off-flavor compared to those expanded in oil. The lipid contents of the Yukwa base and popped rice expanded in oil were 37.73 and 49.65%, respectively, which were significantly higher than in those expanded in salts (0.10 and 0.53%, respectively). The acid and peroxide values were larger in those expanded oil than in salts after 8 weeks storage. In view of the above results, the conclusion was reached that the Yukwa base and popped rice expanded in salts were less likely to provide a calorie intake and to become rancid over a long storage time.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.219-226
• /
• 2014

A bus duct system for wind tower is introduced. A marine cable has been widely used in wind tower or various offshore structures. However, as the electric load capacity is increases, large number of cable lines must be used to cover the huge amount of electric capacities. Therefore, the installation of the cable lines becomes very difficult due to the heavy weight and volume of the cables. On the other hand, by using a single bus duct system line, the power capacity amount of 16 cables can be delivered with significantly compacted form. However, unlike flexible cables, the bus duct is relatively stiff which could generate the resonance phenomenon in the operating condition of the wind tower. In this study, the vibration characteristics of the bus duct are investigated and its long-term reliability during the life time of the wind tower is verified.

• ALGAE
• /
• 제24권3호
• /
• pp.129-138
• /
• 2009

DNA-based discrimination of species is a powerful way for morphologically otherwise similar species, like centric diatoms. Here, the author sequenced long-range nuclear ribosomal DNAs, spanning from the 18S to the D5 region of the 28S rDNA, of Stephanodiscus, particularly including a Korean isolate. By comparisons, high DNA similarities were detected from the rDNAs of nine Stephanodiscus (>99.4% in 18S rDNA, >98.0% in 28S rDNA). Their genetic distances, however, were significantly different (Kruskal-Wallis test, p < 0.01) compared to two related genera, namely Cyclotella and Discostella. In addition, genetic distances of 18S rDNAs were significantly different (Student’s t-test, p = 0.000) against those of the 28S rDNAs according to individual genera (Cyclotella, Discostella, and Stephanodiscus). Phylogenetic analyses showed that Stephanodiscus and Discostella showed a sister taxon relationship, and their clade was separated from a cluster of Cyclotella (1.00 PP, 100% BP). This suggests that Stephanodiscus has highly conserved sequences of both 18S and 28S rDNA; however, Stephanodiscus is well-separated from other freshwater centric diatoms, such as Cyclotella and Discostella, at the generic level.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.509-513
• /
• 2003

중수로 원전에서 환경으로 방출되는 방사성탄소는 비록 소량이지만 반감기(5730년)가 길고 에너지(0.156MeV)가 높은 방사선을 내기 때문에 각별한 관리가 요구되는 핵종으로 다른 방사성 화합물보다 각별한 관리와 감시가 요구된다. C-14은 원자로 구조의 특성상 경수로에 비해 6배정도 많이 발생하며 방출되는 C-14의 약 90%는 감속재 계통이 차지하고 있고 주로 감속재 상층기체의 퍼지 및 배기 방출을 통해 환경으로 빠져나가게 된다. 본 연구는 발전소 계통 운전 및 중수 누설 등으로 인해 방출되는 C-14을 흡착, 제거할 수 있는 장치 개발에 초점을 맞추었으며 시험 운전결과, C-14 제거 성능이 매우 우수한 것으로 평가되었다.

• 한국의류학회지
• /
• 제21권8호
• /
• pp.1406-1416
• /
• 1997

The purpose of this study is to find out an efficient way to utilize clothes. It will be pro- environmental effort besides enhancing clothing life. The study is based on a survey of daily clothing practices. Questionnaire is distributed to female college students who are majoring clothing, textiles, and/or home economics and their parents (n=254). ANOVA, Scheffe test, 1-test and regression are pursued respectively. The main results are as follows: 1. Students, mothers and fathers possess 50.3, 49.9, 45.4 unit clothes, respectively. Mothers possess more formal suits while students possess more casual clothes than the others. The possession pattern is affected by socio-economic variables such as income and purchasing price. 2. In the unused rate of clothes, students'(10.2%) and mothers'(9.7%) rate are significantly higher than that of fathers (6.9%). The unused rate and using efficiency of clothes are affected by socio-economic variables: income and age for unused rate; age and purchasing price for using efficiency. 3. The most important reason for unused clothes is found to be design and color of the clothes. Long years of possessing and change of fashion are the next important reasons. 4. Most of respondents are highly conscious of recycling their clothes. Most of them are willing to donate their clothes to others, re·use or exchange them with the others.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.397-401
• /
• 2015

In this study, analysed the characteristics of power drop and surface damage in solar cell through high temperature and humidity test in the 3 case of EVA(ethylene vinyl acetate) and 2 case ribbon thickness. The solar cells were tested during the 500hr in $85^{\circ}C$ temperature and 85% relative humidity conditions, that excerpted standard of PV Module(KS C IEC-61215). Through the EL(Electroluminescence) shots, specimen's surface have partialy damaged. Before and after high humidity and high temperature test, ribbon thickness $200{\mu}m$ EVA1 case power drop rate was 8.463%, EVA2 case was 6.667%, EVA3 case was 6.373%. In the ribbon thickness $250{\mu}m$ EVA1 case power drop rate was 6.521%, EVA2 case was 8.517%, EVA3 case was 6.019%. EVA3 case was the lowest power and FF(fill factor) drop rate at the 2 case of ribbon thickness, because EVA3 is laerger than EVA1 and EVA2 in thickness, elongation and tensile strength.

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.95-98
• /
• 2011

Recently, there is a growing tendency that fine-pitch electronic devices are increased due to higher density and very large scale integration. Finer pitch printed circuit board(PCB) is to be decrease insulation resistance between circuit patterns and electrical components, which will induce to electrical short in electronic circuit by electrochemical migration when it exposes to long term in high temperature and high humidity. In this research, the effect of soldering flux acting as an electrical carrier between conductors on electrochemical migration was investigated. The PCB pad was coated with OSP finish. Sn3.0Ag0.5Cu solder paste was printed on the PCB circuit and then the coupon was treated by reflow process. Thereby, specimen for ion migration test was fabricated. Electrochemical migration test was conducted under the condition of DC 48 V, $85^{\circ}C$, and 85 % relative humidity. Their life time could be increased about 22% by means of removal of flux. The fundamentals and mechanism of electrochemical migration was discussed depending on the existence of flux residues after reflow process.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.548-552
• /
• 2010

The air suction filter of the power plant decrease the dust and impurities of suction air that reduce the life and efficiency of the boiler. The suction efficiency of the air filter falls with the dust and impurities when the time of use comes to be long. Therefore, the various contaminant of the filter must remove periodically. This paper presents a developed quick exhaust valve to use in the thermo-electric power plant. to removing contaminants on the filter, the blowing is done shortly by air pressure. The Air flowed out to the out side from the inside of the filter. The performance test of the developed valve is done by making a test-bench according to JIS and KS standards. The efficiency is found higher than the existing related valve.