• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.48-54
• /
• 2018

The hydraulic servo actuator has always operated very precisely with high frequency and small displacement, and is used continuously for a long time. The hydraulic servo actuator of the test equipment used in the accelerated life test in order to guarantee the service life of the automotive parts failed earlier than the products before finishing the test. This study performed an analysis on the cause of the failure of the hydraulic servo actuator used in the test equipment, changed the design of the actuator to solve the root cause of the main failure mode, and developed the improved servo actuator. Based on above process, this study established a better performances and longer lifetime of the servo actuator after testing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.160-163
• /
• 2003

This paper represent a test method for the reliability assessment on the indoor vacuum circuit breakers used in the distribution system by an accelerated life test. In order to guarantee the lifetime in service of the vacuum circuit breaker, additional test methods are suggested. Multiple closing-opening operation test under no load condition as a mechanical endurance test and a check of the quality in the vacuum interrupter are adopted to assure the long-term reliability of the vacuum circuit breaker.

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.700-707
• /
• 2016

최근 군에서 사격 훈련 중 1990년에 제조된 40mm 저속유탄(K200)은 탄착불발에 의한 탄약 악작용이 발생하였다. 악작용 내용은 총 72발의 사격 중 11발의 불발탄이 발생되어 불발율은 15% 정도였다. 탄약은 장기 저장 후 사용하는 품질특성을 가지고 있으므로 장기 저장시에도 성능 및 안전성 등의 확보가 필수적이다. 따라서 본 연구에서는 40mm 저속유탄용 신관의 품질개선을 통해 불발율을 최소화하고자 하였다. 첫 번째로 기폭관 성능시험, 발사시험 등을 수행한 결과 불발의 원인을 신관 화공품인 기폭관의 경시변화에 의한 성능저하로 판단하였다. 두 번째로 불발율을 최소화하기 위해 기폭관의 화약량을 증가시키고 화약량 증가에 따른 부품의 치수를 변경하는 등 40mm 저속유탄 신관의 품질개선을 추진하였다. 마지막으로 품질 개선 전 후 기존품과 개선품의 가속노화시험을 통해 저장수명을 예측해 본 결과 기존품은 6.5년, 개선품은 45.5년으로 개선되어 신관의 수명이 약 7배 향상된 결과를 도출하였다. 이에 품질 개선된 40mm 저속유탄 신관은 장기 저장시 불발율이 감소되어 40mm 저속유탄의 안전성, 신뢰성, 성능 향상에 기여할 것으로 판단된다.

• 가정∙방문간호학회지
• /
• 제12권1권
• /
• pp.70-91
• /
• 2005

Purpose: Long-term care facilities have a responsibility to provide care service that enables residents to maintain their maximal functional capacity and quality of life. Also their needs must be reflected to the service programs. In oder to provide an adequate service, we should assess the elderly's physical, psychological and social health status and the need. In addition to this, the long-term care facilities must be defined clearly by the type of services. This study would contribute to conduct appropriate services in public long-term care policy for the older population in the future. This study would provide informations of long-term care facilities' services and older persons' needs for long-term care. Method: To achieve this objectives, this paper investigates the types, service programs of long-term care institutes and job descriptions of workers. The subjects were consisted of 150 long-term care institutes. 150 institutes of long-term care facilities were drawn from all over the country by a nonrandom, convenience sampling. The data were analyzed by frequency, percentage, $x^2$-test using SPSS program. The instruments of this study were self-reported questionnaires for long-term care institutes. The data were collected from March 1, 2004 to may 31, 2004. Results: Service programs of long-term care institutes were not enough for residents' demands. The job descriptions among nurse, social worker and physical therapist were not clearly defined. The nurse's main role was medication and checking vital sign(49.7%), that of social worker's was observation and supervising (31.2%). The most significant problems were lacking of diverse service programs for residents. Conclusion: Considering these findings and conclusion, the needs of long-term care services should be provided by individual physical and psychological level. And the professional manpower for elderly should be educated in multi disciplines.

• 웰빙융합연구
• /
• 제2권2호
• /
• pp.19-37
• /
• 2019

Over the last few decades, the atmospheric carbon dioxide emission has been amplified to a great extent in Turkey. This amplification may cause global warming, climate change and environmental degradation in Turkey. Consequently, ecological condition and human life may suffer in the near future from these indicated threats. Therefore, an attempt was made to test the relationship among a number of expected factors and carbon dioxide emissions in the case of Turkey. The study covers the time series data over the period of 1970-2017. We employed the modern econometric techniques such as Johansen co-integration, ARDL bound testing approach and the block exogeneity. The results of the Johansen co-integration test show that there is a significant long-run relationship between carbon dioxide emissions and expected factors. The long-run elasticities of the ARDL model show that a 1% increase in the GDP per capita, electric consumption, fiscal development and trade openness will increase carbon dioxide emissions by 0.14, 0.52, 0.09 and 0.20% respectively. Further, our findings reveal that the environmental Kuznets curve (EKC) hypothesis and inverted U-shaped relationship between carbon dioxide emission and economic growth prevails. Therefore, the EKC hypothesis is valid and prevailing in the Turkish economy. The diagnostic test results show that the parameters of the ARDL model are credible, sTable and reliable in the current form. Finally, Block exogeneity analysis displays that all the expected factors are contributing significantly to carbon dioxide emissions in the Turkish economy.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.26-35
• /
• 2003

This study explains the effects of lubricant and surface treatment on hot forging die life. The mechanical and thermal load, and thermal softening which is happened by the high temperature of die, in hot and warm forging, cause die wear, heat checking and plastic deformation, etc. This study is fur the effects of solid lubricants and surface treatment condition for hot forging die. Because cooling effect and low friction are essential to the long life of dies, optimal surface treatment and lubricant are very important to improve die life for hot forging process. The main factors, which affect die hardness and heat transfer, are surface treatments and lubricants, which are related to thermal diffusion coefficient and heat transfer coefficient, etc. For verifying these effects, experiments are performed for hot ring compression test and heat transfer coefficient in various conditions as like different initial billet temperatures and different loads. The effects of lubricant and surface treatment for hot forging die life are explained by their thermal characteristics. The new developed technique in this study for predicting tool life can give more feasible means to improve the tool life in hot forging process.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.627-638
• /
• 2017

항공기에 탑재된 레이더 장비는 무작위진동 환경에 장기간 노출되어, 설계 시 피로수명 예측이 중요한 요소로 고려된다. 피로수명을 예측하는 방법 중 주파수영역 피로해석 방법이 지속적으로 제안되고 있다. 본 논문은 많이 사용되는 4가지의 주파수영역 피로해석 방법을 선정하여, 시편 피로시험 결과와 비교하였다. Strain gage를 이용한 시편 피로시험을 통해 시간영역 피로해석과 주파수영역 피로해석 방법을 비교한 결과, Dirlik과 Benasciutti-Tovo방법이 주파수영역 피로해석법 중 시간영역 피로해석법과 잘 일치하였다. 시편 피로시험 결과를 토대로 Dirlik과 Benasciutti-Tovo방법과 유한요소모델을 이용하여 항공기 탑재 장비의 피로해석을 수행하였으며, 요구수명이 만족함을 확인하였다.

• Toxicological Research
• /
• 제30권2호
• /
• pp.131-138
• /
• 2014

Radix Astragali, the root of Astragalus (A.) membranaceus, has been applied in a variety of diseases for a long time in Asian countries such as Korea and China. In addition, the aerial parts such as leaves and stems of A. membranaceus have received a great deal of attention. Recently, the polysaccharide fraction showing a potent immunomoduating activity was isolated from the aerial parts of A. membranaceus. Thus, the aerial parts of A. membranaceus would be worthy enough for a food material and a dietary supplement. However, they should be safe even though valuable. In our previous study, it was estimated that NOAEL for female rats are 5000 mg/kg/day of the crude polysaccharide fraction from A. membranaceus-aboveground parts. As a series of safety evaluation, genotoxicity test for the crude polysaccharide fraction was carried out in this study. In conclusion, the three genotoxicity assays provided strong overall support that the crude polysaccharide fraction lacks mutagenic and/or clastogenic potential under the GLP-based test conditions. This indicates the aerial parts of A. membranaceus would be safe enough for a food material and a dietary supplement.

• Journal of the Korean Wood Science and Technology
• /
• 제46권5호
• /
• pp.497-510
• /
• 2018

본 연구에서는 과열증기를 이용하여 열처리한 낙엽송재의 야외 내후성 시험을 통해 부후균과 해충에 대한 저항성을 평가하였다. 12개월간 진행된 야외 내후성 시험 결과, 무처리재는 흰개미에 의한 피해가 두드러지게 나타났지만 방부목재와 과열증기 열처리재에서는 육안으로 관찰되는 피해는 발견되지 않았다. 무처리재와 방부목재는 약 5%의 질량 감소를 보였으며, 과열증기 열처리재는 약 1%의 질량 감소를 보였다. 야외 내후성 시험이 진행된 후 방부목재에 남아있는 방부약제의 함량이 야외 내후성 시험 전보다 감소한 것으로 보아 야외 내후성 시험이 진행되는 동안 방부약제가 일부 용출된 것으로 보이며, 이에 따라 방부목재의 질량 감소가 무처리재와 유사한 수준으로 나타난 것으로 생각되었다. 과열증기를 이용한 열처리는 방부약제 주입과 같은 화학적인 처리 없이 친환경적으로 목재의 부후균과 해충에 대한 저항성을 개선시킬 수 있는 가능성이 확인되었으며, 이를 위하여 장기적인 관찰이 추가적으로 필요할 것이라 생각된다.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.35-39
• /
• 2014

Window roller housings are durable because high-quality source materials such as stainless steel is used in making them. After a series of precise structure analysis, their design is optimized. They are subject to repetitive driving tests of more 100,000 times, durability tests, impact resistance tests, corrosion tests and others. For a long time, gaps often occur in press molded products owing to serious squareness deformation and flatness deformation of them. Severe burrs in press molded products require frequent grinding, which leads to short life cycle and rough or unreliable movement of assembled roller housing, which, in turn, causes product defects. This study focuses on developing measures to resolve existing defects and to improve lifespan of dies by designing and making a window roller shearing die.