• KDI Journal of Economic Policy
• /
• v.34 no.2
• /
• pp.55-93
• /
• 2012

In Korea, energy policies are actualized through various energy-related plans. Recently, however, as high-ranking plans, which are very vision-oriented, continually set higher sector-by-sector goals, subordinate action plans, which require consistency, encounter distortions in their establishment process. Also, each subordinate action plan reveals limitations in terms of securing flexibility of the plan in responding to uncertainties of the future. These problems pose potential risks such as causing huge social costs. In this regard, with an aim to provide empirical evidence for discussions on improving the procedure for developing and executing Korea's energy plans, this study mainly analyzes the Basic Plan on Electricity Demand and Supply-one of the most important subordinate action plans-in order to explain the problems of the Basic Plan in a logical manner, and potential problems that could occur in the process of sustaining consistency between the Basic Plan and its higher-ranking plans. Further, this paper estimates the scale of social costs caused by those problems assuming realistic conditions. According to the result, in the case of where maximum electric power is estimated to be 7% (15%) less than the actual amount in the Basic Plan on Electricity Demand and Supply, the annual generation cost will rise by 286 billion won and (1.2 trillion won) in 2020. Such social costs are found to occur even when establishing and executing the Basic plan according to the target goal set by its higher-ranking plan, the National Energy Master Plan. In addition, when another higher-ranking GHG reduction master plan requires the electricity sector to reduce emissions by additional 5% in the GHG emissions from the right mix in electricity generation with 'zero' cost of carbon emission, the annual generation cost will rise by approximately 915 billion won in 2020. On the other hand, the analysis finds that since economic feasibility of electric powers in Korea varies significantly depending on their type, Korea is expected to face very small potential social costs caused by uncertainties over the future price of carbon dioxide in the process of establishing the Basic Plan.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.81-89
• /
• 2009

The seepage should be analyzed to design or reinforce the levees. The steady seepage analysis is an usual application in USA and European countries where the large scaled dams and levees are existed. However, Korea and Japan, where the reaching time is short, the excessive forces are applied on the levees at the short reaching time if the seepages are analyzed in steady condition. Accordingly, the unsteady analysis based on the variation of time is necessitated. In the unsteady analysis, the flood wave type is necessary. No criteria and standards, however, are derived for the unsteady seepage in Korea. In the study, the flood wave type is derived for the unsteady seepage. The major reliable flood surface data are collected in 5 stations including Jindong of the Nakdong river basin. The data are sorted in duration, and they are non-dimensionalized. The statistical method is also applied to derive the waves. To verify the study, the seepage is analyzed by the derived wave and applied to the prototype. The results are also compared with the Japanese Method. The errors between the hydraulic gradient and critical velocity method are $0{\sim}0.7%$, $0{\sim}0.7%$ at the Jindong, $1.6{\sim}4.0%$, $1.7{\sim}4.1%$ at the Hyunpoong, $0.6{\sim}3.6%$, $0.6{\sim}3.7%$ at the Waegwan, $2.0{\sim}8.1%$, $2.0{\sim}8.1%$ at the Nakdong, and $1.2{\sim}9.8%$, $1.3{\sim}9.9%$ at the Jeongam, respectively. The relationship($R^2$) between each method is relatively high as $0.983{\sim}0.999$. This means the results are more logical than the Japanese method, and the study is applicable to the design of hydraulic structures.

• Journal of Korean Academy of Nursing
• /
• v.22 no.1
• /
• pp.49-67
• /
• 1992

Most hospitalized children will experience physical pain as well as psychological distress. Preschool children's pain perception related to painful procedures can increase due to elevated anxiety and fear because they do not have understanding logical of their disease and hospitalization. In particular, they are distressed about needle - related procedures which are feared because they are seen to be a cause of bodily damage. This descriptive study attempted to identify pain perception levels in preschool children and their mothers. A self-reporting measurement and behavioral observation were used to collect the data. A total of 25 hospitalized preschool children and their mothers were investigated and data were collected about 60 painful procedures. Data collection was carried out by the researcher and two trained investigators from November first to December tenth. Three insruments were used to collect the data : Faces Pain Rating Scale(FPRS) developed by Beyer was used to measure the degree of preschool children's pain perception about painful procedures. The Visual Analogue Scale(VAS) devised by Huskisson was used to assess the degree of mothers' pain perception about their children's painful procedures. A Pain Behavioral Checklist based on the Procedure Behavior Check List by LeBaron and Zelter and modified by the researcher was used to observe behaviors of preschool children, their mothers, and nurses when the painful procedures took place. The data were analyzed by an SPSS program, and were tested using real numbers, percentages, Pearson correlation coefficient, t-test, and ANOVA. The results of this study are as follows : 1. Of all the painful procedures, the mean score for the FPRS for the preschool children's pain perception was 4.02 points, and the mean score for the VAS of mothers' pain perception was 10.92 points. 2. A Positive correlation which was statistically significant was found between the pain perception of preschool children and their mothers (r＝.53, p＜.01). that is, the higher the children's pain perception was, the higher their mothers' pain perception was. 3. The characteristics of the painful procedures related with children's pain perception as follows : The type of painful procedure was found to be statistically significant (F＝23.44, p＜.01), Among the three procedures Ⅳ starting was found to be perceived as the most painful procedures to the children. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝4.44, p＜.01), and the longer the duration of the procedure, the higher the pain perception wa(r＝.30, p＜.05). Pain perception in the treatment room was higher than in the children's room(t＝6.30, ＜.01), pain perception in the mother's presence was the higher than when the mother was not present (t＝2.91, p＜.01). 4. The characteristics of the painful procedures related with the mothers' pain perception as follows : The type of painful procedure was found to be statistically significant(F＝6.01, p＜.01). Among the three procedures Ⅳ sampling was found to be perceived as the most painful procedures to the mothers. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝5.95, p＜.01), and the longer the duration of the procedure, the higher the pain perception was (r＝.31, p＜.05). Pain perception in the treatment room was higher than in the children's room (t＝3.51, p＜.01), but pain perception in the mother's presence showed statistically significant no difference. 5. Of all of the 19 children's behaviors during the painful procedures, the most frequent behaviors observed Were as follows in order of frequency “crying”, “screamirig”, “facial grimacing”, “physical resistance”, Of all of the nine methers' behaviors, the most frequent by observed in “console children”, “hold children”, “applaud children”, Of all of the 11 nurses' behaviors during the painful procedures, the mast frequent in order were “smiling”, “physical restraint”, “console children”, “praise children”. 6. A positive correlation between children's and mothers' pain perception and children's behaviors was found to be statistically significant (r＝.65, p＜.01, r＝67, p＜.01). Also the relationship between children's and mothers' pain percertion, and mothers' behavior was found to be statistically significant (r＝.57, p＜. 01, 4＝.60, p＜.01). The relationship between children's pain perception and nurses' behaviors was also found to be statistically significant (r＝.46, p＜.01), but there was difference between mothers' pain perception and nurses' behaviors.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.645-653
• /
• 2004

The purpose of this study was to compare and analyze the cognitive levels of 11th grade students and those required in high school chemistry I textbooks standardized by the 7th national education curriculum. For this study, the cognitive development stages of 456 11th grade students were surveyed using short-version GALT (group assessment of logical thinking). Furthermore, 15 basic concepts were extracted from the contents on water and air, 2 units in chemistry I order to analyze the cognitive levels necessary for understanding high school textbooks, using CAT (curriculum analysis taxonomy). The results showed that 52.5% of the surveyed 11th grade students reached the formal operational level, 28.3% transitional levels, and 19.5% concrete operational levels. 68.9% of the academic high school students and 6.6% of the technical high school students reached the formal operational levels, and the ratio of formation was very different in each logics. As a result of the analyzing the cognitive levels needed for understanding chemistry I textbook contents, in spite of a change in national education curriculum, there were no great change in cognitive levels required by scientific concept except some inquiry activities. The cognitive levels in high school chemistry I textbooks by the 7th national education curriculum appeared higher than the cognitive levels of 11th grade student, but cognitive levels of inquiry activities were similar to the cognitive levels of the students. Chemistry teachers thought of chemistry I textbooks by the 7th national education curriculum as desirable because scientific concepts were reduced and a lot of real life materials were adapted. However, they pointed out a problem of difference in contents levels compared with chemistry I textbooks because scientific concepts were greatly reduced in chemistry I textbooks. The cognitive levels required in chemistry I textbooks still appeared higher than those of the students. Consequently, various teaching and learning methods and materials will have to be developed to be suitable for the students' cognitive levels.

• Journal of the Korean School Mathematics Society
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2015

In this paper, in order to improve the teaching contents on even and odd number, composition and decomposition of numbers, and (1 digit)+(1 digit) with carrying, (10 and 1 digit)-(1 digit) with borrowing, the corresponding teaching contents in ${\ll}$Math 1-1${\gg}$, ${\ll}$Math 1-2${\gg}$ are critically reviewed. Implications obtained through this review can be summarized as follows. First, the current incomplete definition of even and odd numbers would need to be reconsidered, and the appropriateness of dealing with even and odd numbers in first grade would need to be reconsidered. Second, it is necessary to deal with composition and decomposition of numbers less than 20. That is, it need to be considered to compose (10 and 1 digit) with 10 and (1 digit) and to decompose (10 and 1 digit) into 10 and (1 digit) on the basis of the 10. And the sequence dealing with composition and decomposition of 10 before dealing with composition and decomposition of (10 and 1 digit) need to be considered. And it need to be considered that composing (10 and 1 digit) with (1 digit) and (1 digit) and decomposing (10 and 1 digit) into (1 digit) and (1 digit) are substantially useless. Third, it is necessary to eliminate the logical leap in the calculation process. That is, it need to be considered to use the composing (10 and 1 digit) with 10 and (1 digit) and decomposing (10 and 1 digit) into 10 and (1 digit) on the basis of the 10 to eliminate the leap which can be seen in the explanation of calculating (1 digit)+(1 digit) with carrying, (10 and 1 digit)-(1 digit) with borrowing. And it need to be considered to deal with the vertical format for calculation of (1 digit)+(1 digit) with carrying and (10 and 1 digit)-(1 digit) with borrowing in ${\ll}$Math 1-2${\gg}$, or it need to be considered not to deal with the vertical format for calculation of (1 digit)+(1 digit) with carrying and (10 and 1 digit)-(1 digit) with borrowing in ${\ll}$Math 1-2 workbook${\gg}$ for the consistency.

• Korean Journal of Social Welfare
• /
• v.58 no.3
• /
• pp.295-312
• /
• 2006

The use of the national pension funds to welfare has been criticized due to its low profitability, with concern about financial instability and the lack of funds. Despite the small amount of the funds employed to the welfare, therefore, it has been decreasing so far. It is resulted from the fact that the use of funds to the welfare sector failed to provide its valid reasons, and take the policy direction firmly. There are three main logical reasons for the welfare investment of national pension funds: Firstly, no state is capable to take the full responsibility for the entire social welfare, and therefore, the funds can be used for social welfare. Secondly, the funded system, contrasted with the case of pay-as-you-go system, has inevitably caused discriminations to the present elderly through excluding them institutionally from pension participation. At last, so as to its selective system, the minimum contribution period of 10 years brings about the equity problem between the people who can afford it and the people who hardly can. Therefore, investing a proportion of funds to the welfare is entirely reasonable in that it can alleviate the discriminations to the present elderly generation and the marginal participants, rather than to meet their social welfare needs. With regard to the policy decision, the profitability of the investment, and the choice of the welfare work, on the other hand, the policy direction should be given a sufficient consideration of a various policy factors such as the necessity of social consensus, independence of the welfare work in relations with other national welfare work, policy identity to judge whether the work is worth long-run or short-run, and the reliance of direct-operated work and indirect-operated work. As a result of all these efforts above mentioned, an investment to the welfare of the national pension funds could be vitalized, and gain public confidence.

• Journal of the Korean association of regional geographers
• /
• v.7 no.3
• /
• pp.74-90
• /
• 2001

Serious depopulation has occurred since the rapid economic growth after $1965{\sim}1995$. As a result, nowadays most of mountain villages face difficulty in maintaining and managing their settlement, because of the elderly population and the extremely small size of the settlement. Population change is understood as the origin of depopulation problems and the criterion for the depopulation. This study aims to identify the problems of over-depopulation in rural Korea and to classify the patterns and process of follow and to provide policy alternatives. It consists with the three parts : identifying the problems of over- depopulation, classifying the socio-economic factors of fallow land, analyzing a detailed case study of follow land in over-depopulation rural area-Sangju Gun and to provide policy alternatives. The results are summarizes as follows: 1) In the study area, the amount of fallow and abandoned cultivated land has increased since 1975. With the increased urbanization, the cause of the increase in fallow and abandoned cultivated-land is the labor shortage of quantity and quality. The underlying reasons for the abandonment of farmland are poor field conditions and the lack of rented farmland. 2) The secondary cause is a relative labor shortage through specialization into intensive horticulture. In the study area, specialization into pear requires intensive labor input. It has caused a relative labor shortage. 3) The third causes are landowner and the lack of rented farmland due to labor shortage. The declining of agriculture and forestry have caused out-migration and increased non-residents' landowner. 4) The fallow patterns are devided into two types the less favored farmland fallow type, non-residents' landowner(out-migrator) fallow type. The significant causes of the increase in fallow and abandoned cultivated land are the labor shortage, intensive farming, less favored farmland conditions, non-residents' landowner. The factors which caused the follow processes in Korea are socio-economic factors (labor shortage, intensive farming, less favored farmland conditions) and cultural factor(non-residents' landowner, psychological ties between rural areas and urban areas).

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.61-83
• /
• 2012

A knowledge map describes the network of related knowledge into the form of a diagram, and therefore underpins the structure of knowledge categorizing and archiving by defining the relationship of the referential navigation between knowledge. The referential navigation between knowledge means the relationship of cross-referencing exhibited when a piece of knowledge is utilized by a user. To understand the contents of the knowledge, a user usually requires additionally information or knowledge related with each other in the relation of cause and effect. This relation can be expanded as the effective connection between knowledge increases, and finally forms the network of knowledge. A network display of knowledge using nodes and links to arrange and to represent the relationship between concepts can provide a more complex knowledge structure than a hierarchical display. Moreover, it can facilitate a user to infer through the links shown on the network. For this reason, building a knowledge map based on the ontology technology has been emphasized to formally as well as objectively describe the knowledge and its relationships. As the necessity to build a knowledge map based on the structure of the ontology has been emphasized, not a few researches have been proposed to fulfill the needs. However, most of those researches to apply the ontology to build the knowledge map just focused on formally expressing knowledge and its relationships with other knowledge to promote the possibility of knowledge reuse. Although many types of knowledge maps based on the structure of the ontology were proposed, no researches have tried to design and implement the referential navigation-enabled knowledge map. This paper addresses a methodology to build the ontology-based knowledge map enabling the referential navigation between knowledge. The ontology-based knowledge map resulted from the proposed methodology can not only express the referential navigation between knowledge but also infer additional relationships among knowledge based on the referential relationships. The most highlighted benefits that can be delivered by applying the ontology technology to the knowledge map include; formal expression about knowledge and its relationships with others, automatic identification of the knowledge network based on the function of self-inference on the referential relationships, and automatic expansion of the knowledge-base designed to categorize and store knowledge according to the network between knowledge. To enable the referential navigation between knowledge included in the knowledge map, and therefore to form the knowledge map in the format of a network, the ontology must describe knowledge according to the relation with the process and task. A process is composed of component tasks, while a task is activated after any required knowledge is inputted. Since the relation of cause and effect between knowledge can be inherently determined by the sequence of tasks, the referential relationship between knowledge can be circuitously implemented if the knowledge is modeled to be one of input or output of each task. To describe the knowledge with respect to related process and task, the Protege-OWL, an editor that enables users to build ontologies for the Semantic Web, is used. An OWL ontology-based knowledge map includes descriptions of classes (process, task, and knowledge), properties (relationships between process and task, task and knowledge), and their instances. Given such an ontology, the OWL formal semantics specifies how to derive its logical consequences, i.e. facts not literally present in the ontology, but entailed by the semantics. Therefore a knowledge network can be automatically formulated based on the defined relationships, and the referential navigation between knowledge is enabled. To verify the validity of the proposed concepts, two real business process-oriented knowledge maps are exemplified: the knowledge map of the process of 'Business Trip Application' and 'Purchase Management'. By applying the 'DL-Query' provided by the Protege-OWL as a plug-in module, the performance of the implemented ontology-based knowledge map has been examined. Two kinds of queries to check whether the knowledge is networked with respect to the referential relations as well as the ontology-based knowledge network can infer further facts that are not literally described were tested. The test results show that not only the referential navigation between knowledge has been correctly realized, but also the additional inference has been accurately performed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.1
• /
• pp.35-45
• /
• 2011

The landscape of Seoul was dynamically changed and developed with the rapid post-war economic growth. Seoul city designated a height regulation district to preserve and manage the city landscape and protect it from haphazard construction. The designation of a maximum height regulation district has obvious purpose and simple regulations which makes the implementation and management easy to apply yet the altitude restriction lacks an objective basis for its enforcement. Many studies have been done and the current uniform height regulation requires more objective and logical guidelines. This study selected the Bukhan Mountain area, a National Park designated to protect the environment, to present a new landscape height guideline to minimize environmental degradation and to harmonize the artificial and natural landscapes of the area. Document research was done to identify the regulation types(absolute height regulation, view line regulation, oblique line restriction regulation) and principles for height regulation district establishment, acknowledge the current status and issues of the Bukhan Mountain area's maximum height regulation district. Gangbuk-Gu was chosen as the site and survey was conducted on outstanding view points and view corridors of residents. From document research, an appropriate landscape height guideline was selected and applied to Gangbuk-Gu. According to the guideline, suitable heights for buildings were suggested. These were then applied to three-dimensional simulations and a final guideline was suggested.

• Journal of the Korean Society for Library and Information Science
• /
• v.16
• /
• pp.281-327
• /
• 1989

This dissertation is presented in two major parts. The first part presented in Chapter 3 attempts to verify the major hypothesis of the present study that the research and development laboratories(hereafter referred to R&D laboratories), establishd withine industrial firms to develop new technologies needed for their own industrial activities, may have another but very important functions to bring information on the externally generated technologies to attention of their respective management decision makers, eventually resulting in the transfer of technology; and such information functions of the R&D laboratories may be better performed by well-organised laboratories than by poorly-organised ones. The second part presented in Chapters 4, 5, 6 and 7 discusses, after the preceding hypotheses has been verified, some desirable situations of the R&D laboratories in facilitating the flow of information on new technologies developed in the world into their industrial firms, centering on the organisational positions and the major fields of interest of the person in charge of the R&D centers, services of the library and technological information office supporting the R&D laboratories, and frequencies of direct contacts of research and development workers with experts in the world and of participation in various conferences, seminars, workshops, exhibitions, etc. Now that there is no recognised instrument and method available for direct measurement of volume of technological information transfered into a particular industrial firm, the number of technologies introduced into a given firm is employed in the present study as an analogous parametre indicating volume of technological information transfered into the firm during a particular period of time. A logical attempt to justify the use of the indirect paramentre is made in Chapter two. vidences needed to verify the hypotheses of the present study are collected through the various publications of the Korea Industrial Research Institutes and other agencies and institutions related to industrial research activities, and through responses to the questionnaire posted to a sample of the 66 R&D laboratories on 6 May 1987 and returned by 30 August of the same year. Some findings and conclusions made in the study are summarised as follows: (1) More information on externally developed technologies flows into the industrial firm with a R&D laboratory of its own than into the industrial firm without one, and naturally, more chances of transfer of technologies are given to the former than to the latter (see 3. 2) (2) After establishing an R&D laboratory, more technological information flows into the industrial firm than before establishing one (see 3. 3) (3) More technological information flows into the industrial firm with a well-organised R&D laboraory than into the firm with a poorly-organised one (see 3. 4) (4) More technological information flows into the ndustrial firm where the director of its R&D laboratory has status qualified to participate in the highest managerial decision making processes of the firm than into the industrial firm where the director does not have such status (see 4. 2) (5) More technological information flows into the industrial firm where the director of R&D laboratory does not hold other positions within the firm than into the industrial firm where the director holds other positions (see 4.3) (6) There is evidence showing that quantities of technological information transfered into industriali firms vary with the case that the major background of the director of the R&D laboratory is the same as the main field of R&D activities of his or her laboratery, the case that the director's background is partly related to the field of R&D activities of the laboratory, and the case that the director's major background is different from the field of R&D activities of the laboratory (see 4.4) (7) More technological information flows into the industrial firm with the director of its R&D laboratory appointed from among professional research and development workers than into the industrial firm with the director of its R&D laboratory appointed from among general managers (see 4.5) (8) More technological information flows into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which uses a library within the firm but outside the laboratory (see 5. 1) (9) More echnological information flows into the industrial firm with a technological information office of its own than into the industrial firm without such an office (see 5. 2) (10) More technological information flows into the industrial firm with a large research and development staff in its R&D laboratory than into the industrial firm with a small staff in its R&D laboratory (see 5. 2) (11) More technological information flows into the industrial firm with its R&D laboratory whose staff members more frequently contact experts in the conferences, seminars, symposiums, and workshops held in foreign countries and novelties in the world's major exhibitions than into the industrial firm with its R&D laboratory whose staff members less frequently contact such experts and novelties (see 6. 2 ; 6. 3)