• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.181-186
• /
• 2005

Because of advanced control technology, Shop floor control system of various kinds of equipment and machinery need a web based remote monitoring to control process efficiently. This paper presents the development of Operation Control System. Operation Control System(OCS) is based on intelligent web monitoring, so that OCS is improved the working condition for the line of heat treatment process and the product's quality. The developed OCS is consisted of Atmega128(MCU) based on embedded system, running the data logging of the line of heat treatment process. Web monitoring system is based on CS8900 ethernet controller and TCP/IP for remote monitoring responsibility between a server and clients and controlling the progress of entire system. The developed OCS is implemented on the line of heat treatment process and shows the improvement of environment condition, product's quality and efficiency of process line.

• Journal of KIISE:Software and Applications
• /
• v.26 no.8
• /
• pp.946-954
• /
• 1999

웹의 등장으로 전자 업무 처리는 급격한 성장을 보여왔다. 많은 업계에서는 업무 처리에 있어 핵심이 되는 트랜잭션을 웹에서 처리하기 위한 시스템 개발에 많은 노력을 기울여왔다. 그러나 대부분의 웹 트랜잭션 연구는 주로 CGI 방식의 트랜잭션 처리 성능의 한계를 극복하거나, 여러 HTTP 요청간의 상태 유지 방법 또는 시스템의 확장성 등에 대해 연구가 집중된 반면, 부적합한 웹 환경으로 유발되는 시스템의 일관성 손실에 대해서는 많은 관심을 받지 못했다.본 논문에서는 웹 상에서 신뢰성 있는 트랜잭션을 처리하는 경우 발생되는 세 가지 문제점을 지적하고, 이를 막기 위해 웹 트랜잭션 처리 시스템인 WebTP에서 제공하는 해결책을 제안한다. 제안한 해결책은 쿠키 로깅, 웹 페이지 로깅, 그리고 일방적으로 철회된 트랜잭션의 상태를 유지하는 기법을 근간으로 한다. 또한 제안된 방법은 유사 구조의 타 웹 트랜잭션 처리 시스템에서도 적용 가능하다.Abstract Electronic business processing has drastically grown since the advent of the World Wide Web. As transaction processing is at heart of business processing, many companies have been interested in transaction processing on the Web. However, little attention has been paid to supporting consistent transaction processing on the Web, while most of the work has been focused on performance enhancement, processing multiple HTTP requests in a single context, and scalability.This paper identifies three problems in consistent transaction processing on the Web, and proposes corresponding solutions for each problem. The results are implemented in the Web transaction processing system WebTP. These solutions are based on cookie logging, Web page logging and keeping information for unilaterally aborted transactions. The solutions proposed in this paper also can be applied to other Web transaction processing system of similar architecture.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.315-321
• /
• 2021

In this paper, we have developed the multiple channel measurement system for IC Socket Test. The one can test the current-voltage measurements for pitting the several device specification, which analyze the thin current from several ㎂ to 5A with very low resistor mΩ. The increasement of the IC socket channel with lead pitch under 0.25 mm be need to perform several functions, concurrently. The system to perform these functions be designed to integrate several SMU(source measure unit) on board. So, we can reduce the 2 minutes test time per channel point to 40 sec, with daisy chain test method. Using by graphic interface, I-V curve mode and data logging technologies, we can implement the test flow methods and can make economies the time and cost.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.18-24
• /
• 1995

This paper describes a multi-computer system developed for CIM(Computer Integrated Manufacturing) system, which combines single board computers and personal computers by using RS422/485 communication and LAN. The system adopts a concept of hot run back up system based on dual CUP system of host and supervisor structure. The dual CPU system and the single board computer are respectively developed using 32 bits microcomputer and 16 bits microprocessor. 8097BH. The multi communication between two types of system is done by using RS 422/485, and also data logging computers are linked with LAN.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.400-402
• /
• 2004

본 논문에서는 웹 서버에게 부하를 주지 않으면서 네트워크를 통해 원격으로 로깅 하는 시스템인 원격 웹 서버 로깅 시스템을 구현하였다. 구현된 로깅 시스템은 웹 서버의 종류와는 관계없이 로그 데이터를 수집할 수 있으며, 여러 개의 서버 군으로 이루어진 시스템에서도 각 시스템의 웹 서버나 환경과는 관계없이 독립적으로 로그 데이터를 수집할 수 있다는 장점을 갖고 있다. 뿐만 아니라 웹 서버에게 미치는 오버헤드를 측정해 본 결과, 부하를 거의 주지 않음으로써 로깅 시스템으로 인한 웹 서버의 성능 저하를 일으키지 않는다는 것을 알 수 있었다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.385-386
• /
• 2012

기존 Telnet, FTP 도구를 통하여 사용자가 직접 Legacy 서버에 접속하여 작업을 하면서 내부정보에 접근하는 현황을 개선하여 사용자와 Legacy 서버 사이에 Gateway 형태의 일체형 S/W와 H/W Appliance 장비를 두어 Legacy 서버에 대한 접근제어, Packet Logging, Packet Filtering을 통하여 내부 중요정보에 대한 접근 통제, 내부정보 유출 차단, 감사 추적의 보안기능을 제공하는 시스템을 개발하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.748-751
• /
• 1997

The White Beamline of the Pohang Accelerator Laboratory(PAL) consists of main and second slits, a microprobe system, two ion chambers, a video-microscope, and a Si(Li) detector. These machine components must be controlled remotely through computer system to make user experiments precise and speedy. A real-time computer control system was developed to control and monitor these machine components. A VNIEbus computer with OS-9 real-time operating system was used for low-level data acquisition and control. VME I/O modules were used for step motor control and scaler control. The software has modular structure for maximum performance and easy maintenance. We developed database, I/O driver, and control software. We used PC/Window95 for data logging and operator interface. Visual C++ was used graphical user interface programming. RS232C was used for communication between VME and PC.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.420-430
• /
• 2001

The object of this study is to develop a computer program for the arrangement of the forest-road network maximizing the investment effect in forest-road construction with factors such as terrains, forest physiognomy, management plan, logging system, cost of forest-road construction, capacity of inputted labour, capacity of timber production and so on. The operating system developed by this study is Korean Windows 95/98 and Microsoft Visual Basic ver. 5.0. User interface was designed as systematic structure, it is presented as a kind of GUI(graphic user interface). The developed program has result of the most suitable forest-road arrangement, has suitable forest-road density calculated with cost of logging, cost of forest-road construction, diversion ratio of forest-road, cost of walking in forest. And the most suitable forest-road arrangement was designed for forest-road arrangement network which maximized investment effect through minimizing the sum of cost of logging and cost of forest-road construction. Input data were divided into map data and control data. Digital terrain model, division of forest-road layout plan, division of forest function and the existing road network are obtained from map data. on the other hand, cost of logging related terrain division, diversion ratio of forest-road and working road, cost of forest-road construction, cost of walking, cost of labor, walking speed, capacity of inputted labor, capacity of timber production and total distance of forest-road are inputted from control data. And map data was designed to be inputted by mesh method for common matrix. This program can be used to construct a new forest-road or vice forest-road which compensate already existing forest-road for the functional forestry.

• Convergence Security Journal
• /
• v.8 no.3
• /
• pp.25-31
• /
• 2008

SELinux, security operating system, is the security system which implements mandatory access control using linux security module on the traditional linux kernel supporting discretionary access control. But intrusion detection and logging are lacked when system intrusions are happened. This study proposes a SELinux security kernel which performs detection of access violation and privilege restriction using dynamic access control. It detects the intrusion using security check when the abnormal access of system is happened, and dynamically changes the system privilege for the intruder through privilege restriction. Finally we prevent reintrusion and explain the result of experiment.