The Journal of the Institute of Internet, Broadcasting and Communication
/
v.17
no.5
/
pp.157-163
/
2017
The binary and interpolation search algorithms are the most famous among search area algorithms, the former running in $O(log_2n)$ on average, and the latter in $O(log_2log_2n)$ on average and O(n) at worst. Also, the interpolation search use only the probability of key value location without priori information. This paper proposes another search algorithm, which I term a 'hybrid block and interpolation search'. This algorithm employs the block search, a method by which MSB index of a data is determined as a block, and the interpolation search to find the exact location of the key. The proposed algorithm reduces the search range with priori information and search the reduced range with uninformed situation. Experimental results show that the algorithm has a time complexity of $O(log_2log_2n_i)$, $n_i{\simeq}0.1n$ both on average and at worst through utilization of previously acquired information on the block search. The proposed algorithm has proved to be approximately 10 times faster than the interpolation search on average.
The objective of this paper is to compare spatial prediction capabilities of univariate kriging algorithms for generating GIS-based thematic maps from ground survey data with asymmetric distributions. Four univariate kriging algorithms including traditional ordinary kriging, three non-linear transform-based kriging algorithms such as log-normal kriging, multi-Gaussian kriging and indicator kriging are applied for spatial interpolation of geochemical As and Pb elements. Cross validation based on a leave-one-out approach is applied and then prediction errors are computed. The impact of the sampling density of the ground survey data on the prediction errors are also investigated. Through the case study, indicator kriging showed the smallest prediction errors and superior prediction capabilities of very low and very high values. Other non-linear transform based kriging algorithms yielded better prediction capabilities than traditional ordinary kriging. Log-normal kriging which has been widely applied, however, produced biased estimation results (overall, overestimation). It is expected that such quantitative comparison results would be effectively used for the selection of an optimal kriging algorithm for spatial interpolation of ground survey data with asymmetric distributions.
Journal of the Korea Institute of Military Science and Technology
/
v.24
no.1
/
pp.1-11
/
2021
Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an high supersonic/hypersonic aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by high power engine noise and jet flow noise, which can cause sonic fatigue damage. In order to predict the fatigue life of the skin, the octave bandwidth SPL should be calculated as narrow bandwidth PSD or acoustic load history using interpolation method. In this paper, a method of converting the octave bandwidth SPL acoustic load into a narrow bandwidth PSD and reconstructed acoustic load history was investigated. The octave bandwidth SPL was converted to the narrow bandwidth PSD using various interpolation methods such as flat, log and linear scale, and the probabilistic characteristics and fatigue damage results were compared. It was found that average error of fatigue damage index by the log scale interpolation method was relatively small among three methods.
Kim, Pyung Han;Jung, Ki Hyun;Yoon, Eun-Jun;Ryu, Kwan-Woo
Journal of Korea Multimedia Society
/
v.24
no.6
/
pp.768-788
/
2021
The reversible data hiding technique safely transmits secret data to the recipient from malicious attacks by third parties. In addition, this technique can completely restore the image used as a transmission medium for secret data. The reversible data hiding schemes have been proposed in various forms, and recently, the reversible data hiding schemes based on interpolation are actively researching. The reversible data hiding scheme based on the interpolation method expands the original image into the cover image and embed secret data. However, the existing interpolation-based reversible data hiding schemes did not embed secret data during the interpolation process. To improve this problem, this paper proposes embedding the first secret data during the image interpolation process and embedding the second secret data into the interpolated cover image. In the embedding process, the original image is divided into blocks without duplicates, and the maximum and minimum values are determined within each block. Three way searching based on the maximum value and two way searching based on the minimum value are performed. And, image interpolation is performed while embedding the first secret data using the PVD scheme. A stego image is created by embedding the second secret data using the maximum difference value and log function in the interpolated cover image. As a result, the proposed scheme embeds secret data twice. In particular, it is possible to embed secret data even during the interpolation process of an image that did not previously embed secret data. Experimental results show that the proposed scheme can transmit more secret data to the receiver while maintaining the image quality similar to other interpolation-based reversible data hiding schemes.
Proceedings of the Earthquake Engineering Society of Korea Conference
/
2000.10a
/
pp.73-80
/
2000
The distance correction term -logA0 of the local magnitude scale was estimated for earthquakes in southern Korea using linear least-squares inversion and interpolation scheme. Total 1054 short-period velocity seismograms from 107 local events recorded at hypocentral distances ranging from 10 to 480 km were used in this study. Simulated Wood-Anderson amplitudes were obtained from velocity seismograms with use of revised Wood-Anderson instrument response with static magnification 2080, damping factor 0.7, and natural period 0.8 sec. The estimated distance correction term for southern Korea is found to be -logA0=1.137 log(r/17) + 0.001159(r-17) + 20, where r is hypocentral distance in kilometers. The attenuation rate of this distance correction term falls between those of southern California and eastern North America.
Proceedings of the Korea Water Resources Association Conference
/
2017.05a
/
pp.334-334
/
2017
Representative particle sizes(RPS) are commonly used for particle size distribution of heterogeneous sediment such as bed material. RPS can provide not only information of mean characteristics of sediment, but also other properties like sorting, skewness, kurtosis. For sediment including sand and clay material, RPS is estimated through two steps. The first is experimental step for calculating weight of each size class, the next is interpolation step to get RPS by using the graph plot. At the second step, graph method known as direct reading of value along the interpolation line in the graph plot is commonly used. This method is often time-consuming job. In this study we developed a new program to get RPS by using MS Excel. Simple linear and semi-log interpolation are used. When compared with conventional graph method(direct reading), simple linear shows 5.31%, while semi-log 1.29% of relative difference. We developed MS Excel program for estimation of RPS automatically.
Journal of electromagnetic engineering and science
/
v.19
no.1
/
pp.6-12
/
2019
An IE-FFT algorithm is implemented and applied to the electromagnetic (EM) solution of perfect electric conducting (PEC) scattering problems. The solution of the method of moments (MoM), based on the magnetic field integral equation (MFIE), is obtained for PEC objects with closed surfaces. The IE-FFT algorithm uses a uniform Cartesian grid to apply a global fast Fourier transform (FFT), which leads to significantly reduce memory requirement and speed up CPU with an iterative solver. The IE-FFT algorithm utilizes two discretizations, one for the unknown induced surface current on the planar triangular patches of 3D arbitrary geometries and the other on a uniform Cartesian grid for interpolating the free-space Green's function. The uniform interpolation of the Green's functions allows for a global FFT for far-field interaction terms, and the near-field interaction terms should be adequately corrected. A 3D block-Toeplitz structure for the Lagrangian interpolation of the Green's function is proposed. The MFIE formulation with the IE-FFT algorithm, without the help of a preconditioner, is converged in certain iterations with a generalized minimal residual (GMRES) method. The complexity of the IE-FFT is found to be approximately $O(N^{1.5})$and $O(N^{1.5}logN)$ for memory requirements and CPU time, respectively.
Proceedings of the Korea Database Society Conference
/
2000.11a
/
pp.227-238
/
2000
Firewall은 다양한 부정Access의 방지책으로서 확실히 유효한 수단이지만 이 Firewall은 사용자로부터 지시된 설정을 충실히 실행하는 것으로 설정 오류, 소프트웨어의 정지, 허가된 룰을 악용한 침입 등 반드시 사용자가 바라는 작용을 무조건적 상태에서 보증해 주는 것은 아니다. 따라서 사용자는 도입 후 에도 운용시에 Access log를 감시하고 본래의 Security Policy에 반하는 행위를 매일 매일 체크하지 않으면 안될 상황에 처해 있다. 본 연구는 이러한 부정Access에 대한 이와 같은 Firewall의 현상에 대한 과제 중에서 "부정Access를 어떻게 하면 일찍, 정확히 체크할 수 있는가\ulcorner"라는 주제를 선택하여 Firewall의 한계와 그 대응책을 실제로 부정Access를 시험해 보는 것으로 검증하기로 하였다. 실험결과에서 (1)Port Scan이나 전자메일 폭탄(서비스정지공격)등은 Firewall로 방지하는 것은 불가능하거나 혹은 Checking이 곤란하다. (2)공격마다 로그 수집을 했음에도 관계없이 Firewall의 로그는 번잡하므로 단시간에 사태의 발견이 대단히 곤란하다고 하는 Firewall의 한계를 인식하였다. 그리고 그 대책으로서 우리는 체크 툴의 유효성에 착안하여 조사한 결과, 결국 무엇이 부정Access인가에 대해서는 어디까지나 이용하는 측이 판단하여 Firewall 상에 설정하지 않으면 안되지만 체크 툴은 이 부정Access 정보를 데이터베이스로서 갖고 있음으로써 '무엇이 부정Access인가'를 이용자 대신에 판단하고 툴에 따라서는 설정을 자동적으로 변경하여 부정 Access의 저지율을 향상시킨다. 이처럼 체크 툴은 Firewall의 수비능력을 보강하는 위치에 있다고 생각할 수 있다.다. 4 장에서는 3장에서 제기한 각각의 문제점에 대해 RAD 의 관점에 비추어 e-business 시스템의 단기개발을 실현하기 위한 고려사항이나 조건 해결책을 제안한다. 본 논문이 지금부터 e-business 를 시작하려고 하는 분, e-business 시스템의 개발을 시작하려고 하는 분께 단기간의 e-business 실현을 위한 하나의 지침이 된다면 다행이겠다.formable template is used to optimize the matching. Then, clustering the similar shapes by the distance between each centroid, papaya can be completely detected from the background.uage ("Association of research for algorithm of calculating machine (1992)"). As a result, conventional NN and CNN were available for interpolation of sampling data. Moreover, when nonlinear intensity is not so large under the field condition of small slope, interpolation performance of CNN was a little not so better than NN. However, when nonlinear intensity is large under the field condition of large slope, interpolation performance of CNN was relatively better than NN.콩과 자연 콩이 성분 분석에서 차이를
Journal of the Institute of Electronics and Information Engineers
/
v.53
no.10
/
pp.123-130
/
2016
High-frequency induction heating equipment can heat the metal by applying a High-Frequency power to the resonant circuit. The resonance circuit is composed of the work coil and the conduction-cooled power capacitor, it influences the performance of the heat treatment equipment according to the characteristics of the capacitor. However, dependence on conduction-cooled power capacitor's import is high due to lack of core technology research and development. Minimizing the generation of internal heat transmitted inside during LC resonance, reduce the reactive power loss, there is a need for a capacitor within the voltage characteristic outstanding. To implement localization it is vital that prior study of the analysis on the frequency response characteristic for the finished capacitor advanced manufacturer be implemented. Studying the interpolation method to read the value at any point of the characteristic curve for a given log-log scale was applied to the analysis tool of the capacitor by my proposed algorithm. The simulation for reproducing frequency response curves was attempted by assuming a capacitor in a simplified series equivalent RC circuit to obtain the equivalent series resistance value. It was confirmed that the reproduction rate was the result value above 83% as compared to the simulation of the properties and characteristics on the actual reactive power for Peak value, and that the algorithm can be applicable when analyzing and predicting the characteristic curves of a simpled model capacitor.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2003.05a
/
pp.255-258
/
2003
Recently, Digital Watermarking is used to authenticate data and to determine whether the data are distorted or not in medical images which is digitalized. The Fourier Mellin method using the Fourier Transform and the Log-Polar coordinate transform gets an invariant feature for RST distortion in images. But there are several problems in the real materialization. Interpolation of the image value should be considered according to the pixel position and so a watermark loss, original image distortion, numerical approximation is happened. Therefore there should be solved to realization of the Fourier Mellin method. Using the Look up table, there reduce the data loss caused by the conversion between Rectangular and Polar coordinate. After diagnose, medical images are transformed the Polar coordinate and taken the Discrete Fourier transform in the center of ROI region. Maintaining the symmetry in Fourier magnitude coefficient, the gaussian distributed random vectors and binary images are embedded in medical images.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.