• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.161-165
• /
• 2003

Optical 60 ㎓ millimeter-wave (MMW) signal generation is demonstrated using the sideband injection-locking method in the master/slave configuration, where two slave lasers are locked to two among several side-bands produced by the direct rf-modulation of a master laser. These two locked slave laser outputs beat against each other in the photo-detector and produce stable and very pure 60 ㎓ signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1622-1631
• /
• 1997

A 3-stages Active Microstrip Phased Array Antenn(AMPAA) is implemented using Injection-Locking Coupled Oscillators(ILCO). The AMPAA is a beam scanning active antenna with capability of electrical scanning by frequency varation of ILCO. The synchronization of resonance frequencies in array elements is occured by ILCO, and the ILCO amplifies the injection signal and functions as a phase shifter. The microstrip ptch is operated as a radiation element. The unilateral amplifier is a mutual coupling element of AMPAA, eliminates the reverse locking signal and controls the locking bandwidth of ILCO. The possibility of Monolithic Microwave Integrated Circuits(MMIC) of T/R module is proposed by simplified and integrated fabrication process of AMPAA. The 0.75.$lambda_{0}$ is fixed for a mutual coupling space to wide the scanning angle and minimize the multi-mode. The AMPAA has beam scanning angle of 31.4.deg., HPBW(Half Power Beam Widths) of 26.deg., directive gain of 13.64dB and side lobe of -16.5dB were measured, respectively.

• Archives of Reconstructive Microsurgery
• /
• v.24 no.2
• /
• pp.68-74
• /
• 2015

Purpose: The reconstruction of femur and tibia defects following tumor resection remains a surgical challenge. The clinical outcome of free vascularized fibula graft (VFG) reconstruction with locking plate for massive femur and tibia defects of more than 10 cm that were secondary to skeletal tumor resection is reported. Materials and Methods: Thirteen patients with a mean follow-up of 3.3 years were reviewed. Seven patients received vascularized fibula grafts in the femur and six in the tibia. The mean bony defect of the femur and tibia was more than 10 cm and the length of the grafted fibula was more than 15 cm. All defects were stabilized with long locking plates. Results: All patients were free of disease at final follow-up; All VFGs were transferred successfully. All patients had a successful outcome with bony union. Stress fractures of the grafted fibula had occurred but the locking plate stabilized the fracture and healed until the last follow-up. All patients were able to walk without a brace after a mean of 9 months postoperatively. Conclusion: VFG with locking plate is a reliable reconstructive procedure for massive femur and tibia defects.

• Structural Engineering and Mechanics
• /
• v.40 no.3
• /
• pp.393-410
• /
• 2011

The eight-node 3D solid element is one of the most extensively used elements in computational mechanics. This is due to its simple shape and easy of discretization. However, due to the parasitic shear locking, it should not be used to simulate the behaviour of structural members in bending dominant conditions. Previous researches have indicated that the introduction of incompatible mode into the displacement field of the solid element could significantly reduce the shear locking phenomenon. In this study, an incompatible mode eight-node solid element, which considers both geometric and material nonlinearities, is developed for modelling of structural members at elevated temperatures. An algorithm is developed to extend the state determination procedure at ambient temperature to elevated temperatures overcoming initially converged stress locking when the external load is kept constant. Numerical studies show that this incompatible element is superior in terms of convergence, mesh insensitivity and reducing shear locking. It is also showed that the solid element model developed in this paper can be used to model structural behaviour at both ambient and elevated temperatures.

• Journal of Information Technology Applications and Management
• /
• v.11 no.1
• /
• pp.53-67
• /
• 2004

We propose an advanced transaction scheduling protocol to improve the concurrency and to guarantee the mobility for the mobile database management systems. Mobility, portability, and wireless link In mobile computing environment can cause certain drawbacks, and thus it is more difficult to solve the concurrency control problems. However, a locking scheme should be used to guarantee the data consistency and to prevent the data conflicts. It is well known that data consistency is guaranteed by standard transaction scheduling schemes like two-phase locking (2PL). It has two of operation, lock and unlock. But 2PL does not give solution for mobile system. Altruistic Locking (AL) and classifying transactions, we adapt, can give solution for the previous problems. AL, as an advanced protocol, has attempted to reduce delay effects associated with lock release moment by the use of donation. In this paper, we extend those approaches and classify the transactions to reduce delay effects of short-lived transaction caused by long-lived transaction. In addition, we show efficient solution for the case of disconnection occurrence. Our protocol, namely, Mobile Altruistic Locking (MAL) is shown to be efficiently used in order to reduce delay effects and to guarantee database consistency in a state of the slippery connection in mobile database systems.

• Structural Engineering and Mechanics
• /
• v.50 no.2
• /
• pp.181-199
• /
• 2014

Locking phenomenon is a mesh problem and can be staved off with mesh refinement. If the studier is not preferred going to the solution with increasing mesh size or the computer memory can stack over flow than using higher order plate finite element or using integration techniques is a solution for this problem. The purpose of this paper is to show the shear locking phenomenon can be avoided by increase low order finite element mesh size of the plates and to study shear locking-free analysis of thick plates using Mindlin's theory by using higher order displacement shape function and to determine the effects of various parameters such as the thickness/span ratio, mesh size on the linear responses of thick plates subjected to uniformly distributed loads. A computer program using finite element method is coded in C++ to analyze the plates clamped or simply supported along all four edges. In the analysis, 4-, 8- and 17-noded quadrilateral finite elements are used. It is concluded that 17-noded finite element converges to exact results much faster than 8-noded finite element, and that it is better to use 17-noded finite element for shear-locking free analysis of plates.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.276.2-278
• /
• 2000

In a recent years, a number of approaches have been studied, including passive, active, and hybrid mode-locking of semi-conductor lasers for short pulse generation and research has been devoted to achieve low timing-jitter operation since the timing jitter is unfavorable for system applications. Among the methods of mode locking, passive mode locking does not need external rf drives, and therefore the operation and fabrication procedures are simplified. In spite of these attractive advantages of passive mode-locked laser, it has critical drawbacks such as large timing jitter and the difficulty in synchronization with external circuits. Their inherent large timing jitter value was shown to be suppressed to certain levels by means of hybrid mode-locking technique$^{(1)}$ , where the saturable absorber section was modulated by an external signal with the cavity round trip frequency. Furthermore, the subharmonic mode-locking (SHML) technique alleviates the restrictions of high speed driving electronics. It has been demonstrated experimentally$^{(1)}$ that the hybrid subharmonic mode-locking technique has lead to significant reduction of the timing jitter. (omitted)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.1-10
• /
• 1991

The paper is concerned with the analysis of laminated composite shell structures using an improved degenerated shell element. In the formulation of the element stiffness, the combined use of three different techniques was made. They are; 1) an enhanced interpolation of transverse shear strains in the natural coordinate system to overcome the shear locking problem; 2) the reduced integration technique in in-plane strains to avoid the membrane locking behavior; and 3) selective addition of the nonconforming displacement modes to improve the element performances. This element is free of serious shear/membrane locking problems and undesirable compatible/commutable spurious kinematic deformation modes. An incremental total Lagrangian formulation is presented which allows the calculation of arbitrarily large displacements. The resulting non-linear equilibrium equations are solved by the Newton-Raphson method. The versatility and accuracy of this improved degenerated shell element are demonstrated by solving several numerical examples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2362-2372
• /
• 1996

This paper deals with the design and development of an Injection-Locking Coupled Oscillators(ILCO), which functions like phase-shifter in the Active Intergrated Phased Array Antenna(AIPAA). This linear array 2-element ILCO consists of two Injection Locking Hair-pin Resonator Oscillators(ILHRO) and an unilateral amplifier. The first and second elements of the ILCO have same frequency tuning range but locking bandwidths of 11.5MHz and 14MHz respectively. A phase shift of .DELTA..PHI.=158.4.deg.(-78.0.deg. to 80.4.deg.) could be obtained inthe second element of ILCO when the first elementof the ILCO was in the reference locking mode(.DELTA..PHI.=0.deg.). When the ILCO is applied to the AIPAA, the predicted beam scanning angle value will be 38.4.deg.. Each ILCO gives good frequency stability and lower AM, FM, and PM noise charactheristics in the mutual coupling lockingmode. The ILCO can not only play a part as the phase shifter for the AIPAA but it can also be usedas the power combining device in the mm-wave frequency range and as a part of a T/R MMIC module.

• Computational Structural Engineering
• /
• v.3 no.1
• /
• pp.97-107
• /
• 1990

The development of an improved degenerated shell element is presented in this paper. In the formulation of this element, an enhanced interpolation of transverse shear strains in the natural coordinate system is used to overcome the shear locking problem ; the reduced integration technique in in-plane strains is applied to avoid the membrane locking behavior ; and selective addition of the nonconforming displacement modes improve the element performances. This element is free of serious locking problems and undesirable compatible or commutable spurious kinematic deformation modes, and passes the patch tests. To illustrate the performance of this improved degenerated shell element, some benchmark problems are presented. Numerical results indicate that the new element shows fast convergence and reliable solutions.