• The Journal of Society for e-Business Studies
• /
• v.27 no.2
• /
• pp.105-135
• /
• 2022

As COVID-19 has led to a surge in e-commerce Buy Now Pay Later(BNPL) has become preferred choice among millennials. In Korea Coupang followed by Naver Pay offers a deferred payment, aiming to create customer lock-in effect, save credit card processing fee and lay the groundwork for entering into new financial services. However the literature related to the influential factors of customers' usage intention toward a deferred payment is scarce. For the study, a multi-group analysis was carried out to find differences between Naver shopping and Coupang. The results revealed that the important factors that affect a deferred payment adoption were compatibility, impulsive buying tendency in Naver shopping, whereas compatibility, relative advantage, additional value in Coupang(listed in order of most important). In addition, impulsive buying tendency had a positive effect on adoption intention in Naver shopping and on perceived risk in Coupang. The results imply that Naver shopping need to focus on managing delinquency while Coupang should provide sufficient information on how late fees and credit rating downgrade work and try not to make a deferred payment option stand out. In order to increase adoption rate it is recommendable to narrow down target segment of a deferred payment and expand it to a specialized vertical such as travel.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.575-582
• /
• 2018

The spaceborne cooler is applied to cool down of the focal plane of the infrared detector of the observation satellite. However, this cooler induces unnecessary micro-jitter which can degrade the image quality of the high-resolution observation satellite. In this study, we proposed a multi-layered blade type vibration isolator to attenuate micro-vibration generated from a spaceborne cooler, while assuring structural safety of the cooler under severe launch loads without an additional launch-lock device. The blade of the isolator is formed with multi-layers in order to obtain durability against fatigue failure and an adhesive is applied between each layers for granting high damping capability under launch vibration environment. In this study, the basic characteristics of the isolator were measured using the free-vibration test. The effectiveness of the isolator design was demonstrated by launch vibration test at qualification level.

• The Journal of Korean Physical Therapy
• /
• v.20 no.4
• /
• pp.71-78
• /
• 2008

Purpose: This study standardizes the position and direction of devices based on general user expectations and stereotypes. Population stereotypes are cognitive structures that contain the perceiver's knowledge, beliefs, and expectations about human groups. In this paper, the stereotypes that people typically expect when manipulating 'cylindrical key-in-knob locks' and 'lever-type water faucet handles' were investigated and data regarding their expectations were collected. Methods: Two sets of 600 participants, between 13 and over 60 years old, were recruited for the experiment. Each group was evenly subdivided into six age groups. Each participant was presented with cylindrical door locks mounted on a miniature door and actual lever-type water faucet handles mounted on a mockup sink. Results: If the cylindrical lock was positioned 'vertically,' 59.2% of the participants expected the device to be locked, and if the lever type faucet handle was positioned 'up,' 63.0% of the participants expected the device to be turned on. Thus, daily-use devices should be designed consistent with user expectations of operation. There was a significant difference between genders for manipulating the faucet handle between up and down. Conclusion: A more general stereotype may be defined by repetitive measurements under the same test conditions with fixed time intervals, as well as accounting for people with cognitive problems.

• Journal of the Korean Society for Library and Information Science
• /
• v.28
• /
• pp.71-81
• /
• 1995

There are no exact copies or carvings of India's original Buddhist Scripts published in Korea that had been flowed into Japan except those of WanSanJungUiMongSanPuPo(환산정의몽산법어). YaWoonJaKyung (야운자경). KyeChoShimHakInMoon(계초심학인문) PalSimSooHangChang(발심수행장) and MongsanWhaSangPupoRackLock published by a mid-Chosun Dynasty Buddhist monk, YaWoon TaesunSa. Others are the translations by Chinese people. All printings were of woodblock except ChonjimyungYangsoo- RhockChapMoon(천지명양수육잡문) of Inkyng wood printing type. This shows perhaps that the Buddhists were so devout that they spared no effort in their prayers to head for the Paradise. Even the woodblock carver himself took his hard work for granted in his belief and engraved the blocks with all his heart taking his work as God-given task. Or. perhaps they to use wood-block printing as the demand for the Scripts soared. By the way. as the Koryo Dynasty took Buddhism as the state religion, it was natural that the Buddhist Scripts were published at TaeJangToKam (the publishing office) and were much encouraged. It is noteworthy. however, that not a few Buddhist Scripts had been published during the Chosun Dynasty despite its crack-down on Buddhism as the Confucianism was declared as the state principle. The Scripts were even published by such temples as MoonJooSa(문수사), MyoHeeAm(묘희암). SsangbongSa(쌍봉사). PyoHoonSa(표훈사), YooJupSa(유점사), YongJangSa(용장사). and AnShimSa(안심사). The fact that the Scripts were even published by KanKyungToKam(간경부감) leads us to reconsider the traditional way of thinking of the Chosun Dynasty as anti-Buddhist or flunkeyist. The historical fact that a record number of Buddhist publications had been transmitted to Japan - is it accidental? - This issue could well be another subject matter for further research. However, it should be noted that very few of above­mentioned Buddhist Scripts are found in present-day Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.33-40
• /
• 1998

The composite SiO$_2$/Si$_3$N$_4$/SiO$_2$(ONO) film formed by oxidation on nitride film has been widely studied as DRAM stacked capacitor multi-dielectric films. Load lock(L/L) LPCVD system by HF cleaning is used to improve electrical capacitance and to scale down of effective thickness for memory device, but is brings a new problem. Nitride film deposited using HF cleaning shows selective deposition on poly silicon and oxide regions of capacitor. This problem is avoidable by carpeting chemical oxide using $H_2O$$_2$cleaning before nitride deposition. In this paper, we study the limit of nitride thickness for abnormal oxidation and the initial deposition time for nitride deposition dependent on underlayer materials. We proposed an advanced fabrication process for stacked capacitor in order to avoid selective deposition problem and show the usefulness of nitride deposition using L/L LPCVD system by $H_2O$$_2$cleaning. The natural oxide thickness on polysilicon monitor after HF and $H_2O$$_2$cleaning are measured 3~4$\AA$, respectively. Two substrate materials have the different initial nitride deposition times. The initial deposition time for polysilicon is nearly zero, but initial deposition time for oxide is about 60seconds. However the deposition rate is constant after initial deposition time. The limit of nitride thickness for abnormal oxidation under the HF and $H_2O$$_2$cleaning method are 60$\AA$, 48$\AA$, respectively. The results obtained in this study are useful for developing ultra thin nitride fabrication of ONO scaling and for avoiding abnormal oxidation in stacked capacitor application.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.235-240
• /
• 2006

Ionospheric scintillation induces a rapid change in the amplitude and phase of radio wave signals. This is due to irregularities of electron density in the F-region of the ionosphere. It reduces the accuracy of both pseudorange and carrier phase measurements in GPS/satellite based Augmentation system (SBAS) receivers, and can cause loss of lock on the satellite signal. Scintillation is not as strong at mid-latitude regions such that positioning is not affected as much. Severe effects of scintillation occur mainly in a band approximately 20 degrees on either side of the magnetic equator and sometimes in the polar and auroral regions. Most scintillation occurs for a few hours after sunset during the peak years of the solar cycle. This paper focuses on estimation of the effects of ionospheric scintillation on GPS and SBAS signals using a software receiver. Software receivers have the advantage of flexibility over conventional receivers in examining performance. PC based receivers are especially effective in studying errors such as multipath and ionospheric scintillation. This is because it is possible to analyze IF signal data stored in host PC by the various processing algorithms. A L1 C/A software GPS receiver was developed consisting of a RF front-end module and a signal processing program on the PC. The RF front-end module consists of a down converter and a general purpose device for acquiring data. The signal processing program written in MATLAB implements signal acquisition, tracking, and pseudorange measurements. The receiver achieves standalone positioning with accuracy between 5 and 10 meters in 2drms. Typical phase locked loop (PLL) designs of GPS/SBAS receivers enable them to handle moderate amounts of scintillation. So the effects of ionospheric scintillation was estimated on the performance of GPS L1 C/A and SBAS receivers in terms of degradation of PLL accuracy considering the effect of various noise sources such as thermal noise jitter, ionospheric phase jitter and dynamic stress error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1774-1781
• /
• 1997

In this paper, we propose a full digital frequency and phase locked loop for CATV and HDTV receivers adopting VSB modulation. The CATV and HDTV receivers proposed by the Grand-Alliance in USA are ultilizing analog signal processing technology for carrier recovery. By the way, it is not a good architecture for the development of single chip ASIC operating in digital domain. To solve this problem while improving the performance, we first down convert the received r.f. signal to a near baseband signal for a low-rate AD converter and then we use digital signal processing techniques. The proposed system has the frequency pull-in range of -200 KHz +2.50 KHz. Moreover, it has the ability of adaptive loop bandwidth control according to the amount of frequency offset to improve the acquisition time while reducing the phase noise.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.91-96
• /
• 2012

The retract actuator makes the landing gear retract or extend during take-off and landing of an aircraft. To prevent folding of landing gear that has remained in the extended state because of an unexpected external disturbance, an internal locking device is applied to the retract actuator. The locking device is restrained with another internal component by oil pressure supplied to the retract actuator, and this restraint makes the locking of the actuator possible. Because locking and unlocking are repeated during retraction and extension of the landing gear, the locking device takes repeated identical loads, and the possibility of fatigue failure exists. In this study, the process and results of fatigue analysis for the locking device are presented, and the appropriateness of the analysis result is verified using a fatigue test.

• International Journal of Computer Science & Network Security
• /
• v.24 no.6
• /
• pp.216-222
• /
• 2024

Objectives: To compare the levels of anxiety on GAD-7 scale among undergraduates of dental, medical and engineering students during COVID-19. The secondary objectives were to correlate the factors influencing level of anxiety and to assess the coping strategies practiced by undergraduates' students of Karachi duri.ng COVID-19 outbreak. Methodology: The cross-sectional based survey was conducted online among the medical, dental and engineering undergraduates' university students of private sector in Karachi through purposive sampling technique during COVID-19 lock down period. The GAD-7 validated tool was used along with the demographic variables, related stress factors and the coping skills practiced during this outbreak. Total 571 questionnaires were found completed in all sections. The data was analyzed on SPSS version 23. P-value <0.05 was considered as statistically significant. Results: The mental health of the students was assessed on GADS-7 scale as normal, mild, moderate and severe levels. From the total (n=18-3.2%) were normal, (n=132-23.1%) had mild, (n=343-60.1%) had moderate and (n=78-13.7%) had severe anxiety level on GADS-7. The levels of anxiety on GAD-7 scale were all positively associated with the related stressors at p-value of 0.000. Moreover the results depicted that there was a moderate and positive correlation found (0.456, 0.447, 0.512 and 0.452) for all related stressors and GAD-7 scale. Taking breaks from watching, reading news regarding the outbreak of COVID-19, meditation and engaging in some other activities were the most frequently used coping strategies for all levels of anxiety among three cohorts of undergraduates'. Conclusion: Undergraduates has shown 96.9% drastically increased level of anxiety during the outbreak of COVID 19 pandemic. Taking breaks from watching, reading news regarding the outbreak of COVID-19 was the most frequent behavior practiced by the students.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1125-1134
• /
• 2011

In this paper a wideband frequency synthesizer is designed for DTV tuners using a $0.18{\mu}m$ CMOS process. It satisfies the DTV frequency band(48~1675MHz). A scheme is proposed to cover the full band using only one VCO and reliable broadband characteristics are achieved by reducing the variations of VCO gains and frequency steps. The simulation results show that the designed VCO has frequency range of 1.85~4.22GHz, phase noise at 4.22GHz of -89.7dBc/Hz@100kHz, gains of 62.4~95.8MHz/V(${\pm}21.0%$) and frequency steps of 22.9~47.9MHz(${\pm}35.3%$). The designed VCO has a phase noise of -89.75dBc/Hz at 100kHz offset. The designed synthesizer has a lock time less than $0.15{\mu}s$. The measured VCO tuning range is 2.05~3.4GHz. The frequency range is shifted down but still satisfy the target range owing to the design for enough margin. The designed circuit consumes 23~27mA from a 1.8V supply, and the chip size including PADs is $2.0mm{\times}1.5mm$.