• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.28-33
• /
• 2015

The icebreaking research vessel ARAON had her second ice trial in the Arctic Ocean from July 16 to August 12, 2010. In this study, the ice loads measured during the “general” operation and “ice breaking” operation in ice-covered waters were analyzed and compared. Whereas the “general” operation stands for the voyage in the water partially covered by ice, the “ice breaking” operation involved substantial ice floes for the ice breaking performance test. Based on the measured data, comparisons of the relationship between the ship speed and ice load, and between the locations of strain gauges and ice loads were investigated. Peak stresses higher than 20 MPa were found. The longitudinal and vertical correlations between the measurement location and ice load were analyzed, and the probability of peak stress was calculated. As a result, the probability function for higher ice loads during both operation modes was expressed in an exponential and power forms.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.948-952
• /
• 2009

Recently, a new distributed grid scheme, called DS-GRID(distributed S-GRID), has been proposed to manage the location information of moving objects in a spatial network[1]. However, because DS-GRID uses uniform grid cells, it cannot handle skewed data which frequently occur in the real application. To solve this problem, we propose a dynamic distributed grid scheme which splits a grid cell dynamically based on the density of moving objects. In addition, we propose a k-nearest neighbor processing algorithm for the proposed scheme. Finally, it is shown from the performance analysis that our scheme achieves better retrieval and update performance than the DS-GRID when the moving objects are skewed.

• Progress in Medical Physics
• /
• v.25 no.1
• /
• pp.37-45
• /
• 2014

The accuracy and uniformity of CT numbers are the main causes of radiation dose calculation error. Especially, for the dose calculation based on kV-Cone Beam Computed Tomography (CBCT) image, the scatter affecting the CT number is known to be quite different by the object sizes, densities, exposure conditions, and so on. In this study, the scatter impact on the CBCT based dose calculation was evaluated to provide the optimal condition minimizing the error. The CBCT images was acquired under three scatter conditions ("Under-scatter", "Over-scatter", and "Full-scatter") by adjusting amount of scatter materials around a electron density phantom (CIRS062, Tissue Simulation Technology, Norfolk, VA, USA). The CT number uniformities of CBCT images for water-equivalent materials of the phantom were assessed, and the location dependency, either "inner" or "outer" parts of the phantom, was also evaluated. The electron density correction curves were derived from CBCT images of the electron density phantom in each scatter condition. The electron density correction curves were applied to calculate the CBCT based doses, which were compared with the dose based on Fan Beam Computed Tomography (FBCT). Also, 5 prostate IMRT cases were enrolled to assess the accuracy of dose based on CBCT images using gamma index analysis and relative dose differences. As the CT number histogram of phantom CBCT images for water equivalent materials was fitted with a gaussian function, the FHWM (146 HU) for "Full-scatter" condition was the smallest among the FHWM for the three conditions (685 HU for "under scatter" and 264 HU for "over scatter"). Also, the variance of CT numbers was the smallest for the same ingredients located in the center and periphery of the phantom in the "Full-scatter" condition. The dose distributions calculated with FBCT and CBCT images compared in a gamma index evaluation of 1%/3 mm criteria and in the dose difference. With the electron density correction acquired in the same scatter condition, the CBCT based dose calculations tended to be the most accurate. In 5 prostate cases in which the mean equivalent diameter was 27.2 cm, the averaged gamma pass rate was 98% and the dose difference confirmed to be less than 2% (average 0.2%, ranged from -1.3% to 1.6%) with the electron density correction of the "Full-scatter" condition. The accuracy of CBCT based dose calculation could be confirmed that closely related to the CT number uniformity and to the similarity of the scatter conditions for the electron density correction curve and CBCT image. In pelvic cases, the most accurate dose calculation was achievable in the application of the electron density curves of the "Full-scatter" condition.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.77-87
• /
• 2021

Several studies have been conducted to analyze, predict, and prevent the risk of ground subsidence occurring in urban areas. Nevertheless, there is insufficient research effort on risk analysis that utilizes the correlation between the density of underground structures (i.e., the spatial quantity of buried objects installed in the ground around the interested area) and the occurrence of ground subsidence. In this paper, a study was conducted to analyze the line density of underground structures using GIS-based spatial information data, and to link this with the recorded ground subsidences. An optimization algorithm was developed to maximize the correlation between the line density of 29 recorded ground subsidences and 6 types of underground structures that occurred between 2010 and 2015 for the analysis area. The concept of normalized line density was also proposed for the analysis. The normalized line density of the analysis area was divided into five grades (Grade 1: lowest, Grade 5: highest). When the optimization algorithm was applied, the case where the normalized line density was Grade 4 or higher at the location of the recorded ground subsidences was about > 80%. It is thought that the density analysis result of underground facilities can be applied to the ground subsidence risk analysis by using the proposed optimization algorithm.

• Journal of Korean Foot and Ankle Society
• /
• v.14 no.2
• /
• pp.165-168
• /
• 2010

Purpose: Pain or discomfort caused by foot diseases may lead to abnormal gait, resulting in decreased bone mineral density (BMD) of the affected lower limb. We analyzed the effect of foot affection to BMD and its clinical significance. Materials and Methods: Bilateral hip BMD was evaluated in 93 patients with unilateral chronic foot disease. To minimize statistical errors, we excluded patients with medical histories that had influence on BMD. Analysis was based on the results of BMD tests at the first visit. All patients denied past medical intervention for osteoporosis. The difference in density between bilateral limbs was determined by comparing BMDs of the neck, upper neck, trochanter and total area of hip. Results: Test results revealed the decrease of BMD in the lower limb with the affected foot, compared to the unaffected side. This decrease was significant in the area of the trochanter (p <0.05). There was no marked difference of BMD in relation with duration of affection, underlying disease or age. Pertaining the location of foot affection, the hindfoot group showed significant decrease in BMD compared to the forefoot group. The group with affection in bone and joint also showed a marked decrease in BMD compared to the soft tissue group (p <0.05). Conclusion: Pain and discomfort caused by chronic foot diseases can lead to a decrease in the BMD of the affected lower limb. This may increase the risk of complications such as osteoporotic fracture and muscular atrophy.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.765-775
• /
• 2012

The cross-validation is a popular method to select bandwidth in all types of kernel estimation. The maximum likelihood cross-validation, the least squares cross-validation and biased cross-validation have been proposed for bandwidth selection in kernel density estimation. In the case that the probability density function has a discontinuity point, Huh (2012) proposed a method of bandwidth selection using the maximum likelihood cross-validation. In this paper, two forms of cross-validation with the one-sided kernel function are proposed for bandwidth selection to estimate the location and jump size of the discontinuity point of density. These methods are motivated by the least squares cross-validation and the biased cross-validation. By simulated examples, the finite sample performances of two proposed methods with the one of Huh (2012) are compared.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.39-39
• /
• 2003

The plasmaspheric region shows relatively strong longitudinal asymmetry in the sense that the location of the plasmapause and the density distribution significantly vary with respect to local time, and this asymmetry effect has been neglected in previous magnetospheric ULF wave studies. In this study, we numerically examine the MHD wave properties of field line resonances (FLRs) and Pi2 pulsations when the inner magnetosphere is assumed to be asymmetric. We use the dipole magnetic field model, but our density model is based on. observational data from the IMAGE satellite. We assume an impulsive input in the magnetotail, which can be associated with a substorm onset. Our results suggest that local FLRs appear in both the radial and azimuthal oscillations owing to the asymmetry. Plasmaspheric Pi2 signals appear in the compressional component, but they are more strongly affected by ambient plasmaspheric structure than the FLRs. We compare our results with the observational data of Pi2 events.

• Journal of the Korean housing association
• /
• v.9 no.2
• /
• pp.33-41
• /
• 1998

To accomodate increasing housing shortage in many cities, Korean Government has implemented various residental land development projects to provide more land for new housing construction. Most of the residential areas developed by these projects were used for multi-family housing units. Under this process, the size and location of the neighborhood service facilities in the development area were regulated by uniform standards. For this reason, the neighborhood service facilities were not able to be provided according to the household density but provided in minimum status required by these standards. Based on these considerations, this study aimed to evaluated residential land development project conducted by pubilc authority, one of the residential land development projects in Korea. Results of the case studies confirmed findings from literature review and proposed that existing regulations applied to these projects need to be amended not only to accomodata unique situation of each development area but also to enhance level of the dwelling environment. As ways to resolve these problems, this study suggests followings: (1) more flexible operation of the regulations, (2) inclusion of the socio-economic characteristics of the perspective resident in planning process, and (3) introduction of design techniques in the project. Finally, this study proposed future study directions in relation to this issue.

• Steel and Composite Structures
• /
• v.51 no.4
• /
• pp.363-375
• /
• 2024

Within the optimization field, addressing the intricate posed by fluidic pressure loads on functionally graded structures with frequency-related designs is a kind of complex design challenges. This paper thus introduces an innovative density-based topology optimization strategy for frequency-constraint functionally graded structures incorporating Darcy's law and a drainage term. It ensures consistent treatment of design-dependent fluidic pressure loads to frequency-related structures that dynamically adjust their direction and location throughout the design evolution. The porosity of each finite element, coupled with its drainage term, is intricately linked to its density variable through a Heaviside function, ensuring a seamless transition between solid and void phases. A design-specific pressure field is established by employing Darcy's law, and the associated partial differential equation is solved using finite element analysis. Subsequently, this pressure field is utilized to ascertain consistent nodal loads, enabling an efficient evaluation of load sensitivities through the adjoint-variable method. Moreover, this novel approach incorporates load-dependent structures, frequency constraints, functionally graded material models, and polygonal meshes, expanding its applicability and flexibility to a broader range of engineering scenarios. The proposed methodology's effectiveness and robustness are demonstrated through numerical examples, including fluidic pressure-loaded frequency-constraint structures undergoing small deformations, where compliance is minimized for structures optimized within specified resource constraints.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.978-982
• /
• 2014

A mass mortality of 249 finless porpoises Neophocaena asiaeorientalis occurred in the Saemangeum Dyke in February 2011. It was an extraordinary event, notable due to the death toll and the location of the occurrence, a semi-isolated lake enclosed by a man-made structure. We conducted sighting surveys that consisted of a land-based sighting survey recorded from three different platforms, and a ship-based sighting survey in the lake. The land-based survey was dedicated to clarifying the distribution of finless porpoises and whether they passed through two water gates (Shinsi and Garyek) of the dyke from 2011 to 2013. No finless porpoises were observed in the 2011 or January 2012 surveys. In April 2012, two months and one year after the mass mortality, one finless porpoise, swimming 400 m from the Shinsi water gate, was observed by a land-based survey. The number of observed individuals increased to nine in 2012 and reached 10 by May 2013 at the time of the surveys. Most of the porpoises were detected near the Garyek water gate. The density of the animals was $0.075/km^2$ in 2012 and $0.083/km^2$ in 2013. The density of porpoises was $2.063/km^2$ at the time of the mass mortality.