• Communications for Statistical Applications and Methods
• /
• 제4권3호
• /
• pp.917-927
• /
• 1997

Consider the confidence interval estimators of treatment effect when some of data to be analyzed are randomly censored, assuming two-sample location-shift model. Recently proposed PARK and PARK(1995) Estimators is discussed and a bootstrap estimator is proposed. This estimator is compared with other well-known estimators throught the simulation studies and recommendations about the use are made.

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.125-135
• /
• 2007

An automated guided vehicle (AGV) system is a group of collaborating unmanned vehicles which is commonly used for transporting materials within manufacturing, warehousing, or distribution systems. The performance of an AGV system depends on the dispatching rules used to assign vehicles to pickup requests, the vehicle routing protocols, and the home location of idle vehicles, which are called dwell points. In manufacturing and distribution environments which emphasize just-in-time principles, performance measures for material handling are based on response times for pickup requests and equipment utilization. In an AGV system, the response time for a pickup request is the time that it takes for the vehicle to travel from its dwell point to the pickup station. In this article, an exact dynamic programming algorithm for selecting dwell points in a tandem-loop multiple-vehicle AGV system is presented. The objective of the model is to minimize the maximum response time for all pickup requests in a given shift. The recursive algorithm considers time restrictions on the availability of vehicles during the shift.

• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.142-149
• /
• 2013

인공위성을 포함한 우주물체가 지구궤도로 재진입하고 대기권에서 소실되거나, 지표면에 추락하는 일들이 날로 증가하고 있다. 최근 국내에서도 위성추락상황실을 운영하여 인공위성의 추락고도 및 추락시기에 대한 예측을 실시하였다. 아직까지 국내에서는 우주물체의 추락 시 현업에 적용할 수 있는, 미전략사령부에서 발표하는 TLE 자료를 활용한 독자적인 추락예측모델이 없으며, 다른 위성 운영국에서 발표하는 추락 예상시기를 참고하였다. 이 연구에서는 TLE 자료에 대기모델을 바탕으로 추락예상시기를 예측하고, 분석한 결과를 종합 분석하였고, 위성추락상황실 운영간 적용했던 RUBBER SHEET SHIFT METHOD(RSSM)의 인공위성 예상추락시기 예측결과를 토대로 새로운 추락모델에 대한 예시를 제안하였다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2004년도 학술발표논문집
• /
• pp.179-184
• /
• 2004

Statistical process control (SPC) and engineering process control (EPC) are based on different strategies for process quality improvement. SPC reduces process variability by detecting and eliminating special causes of process variation, while EPC reduces process variability by adjusting compensatory variables to keep the quality variable close to target. Recently there has been need for an integrated process control (IPC) procedure which combines the two strategies. This article considers a scheme that simultaneously applies SPC and EPC techniques to reduce the variation of a process. The process disturbance model under consideration is an IMA(1,1) model with a location shift. The EPC part of the scheme adjusts the process, while the SPC part of the scheme detects the occurrence of a special cause. For adjusting the process repeated adjustment is applied by compensating the predicted deviation from target. For detecting special causes the two kinds of exponentially weighted moving average (EWMA) control chart are applied to the observed deviations: One for detecting location shift and the other for detecting increment of variability. It was assumed that the adjustment of the process under the presence of a special cause may change any of the process parameters as well as the system gain. The effectiveness of the IPC scheme is evaluated in the context of the average cost per unit time (ACU) during the operation of the scheme. One major objective of this article is to investigate the effects of the process parameters to the ACU. Another major objective is to give a practical guide for the efficient selection of the parameters of the two EWMA control charts.

• Journal of Korean Neurosurgical Society
• /
• 제30권sup2호
• /
• pp.221-227
• /
• 2001

Objective : The therapeutic impact of tumor resection in glioblastomas is poorly defined and still questionable. Therefore, we conducted the current study to verify the role of tumor resection in the treatment of these highly malignant tumors. Methods : A retrospective study was performed(1990-1999) to compare the treatment results of surgical resection plus radiotherapy(130 patients) with those of stereotactic biopsy plus radiotherapy(19 patients) in glioblastomas. Only adult patients with supratentorial, de novo glioblastoma located in one lobe were included. Survival time/rate was analysed with Kaplan-Meier method, and prognostic variables were obtained from the univariate log-rank test and the multivariate Cox's proportional hazards model. Results : The resection group and the biopsy group did not differ in terms of age, gender, duration of symptoms, presenting symptoms, tumor location, tumor side, tumor size, and the frequency of midline shift. Patients in the biopsy group more often were found to have worse preoperative Karnofsky performance status(KPS)(p=0.001). On univariate analysis, age, KPS, and tumor side were associated with survival(p=0.0053, 0.0001, and 0.0331 respectively). Median survival time and 1-year survival rate were also statistically improved by tumor resection ; resection group - 13 months and 61.2%, and biopsy group - 8 months and 19.7%, respectively(p=0.0001). In patients with midline shift of the tumor, resection was highly effective comparing to biopsy(p=0.0001), but in patients without midline shift, external beam radiation alone was as effective as tumor resection(p=0.0605). Other prognostic variables did not affect survival. On multivariate analysis after variable selection, survival was independently associated with KPS(p=0.001), but not the surgical resection(p=0.2837). Even in biopsy group with midline shift of the tumor, survival rate was not different from that seen after tumor resection(p=0.3505). Conclusions : Radiotherapy alone was as effective as tumor resection plus radiotherapy in patients without midline shift of the tumor. Although there was not statistically significant, tumor resection looked like effective in patients with midline shift. For supratentorial, lobar glioblastoma patients without mass effect of the tumor, biopsy with radiotherapy is one of rational treatment strategies. We consider that tumor resection should be performed in patients with pretreatment midline shift.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4665-4671
• /
• 2013

엔진 설치 시스템은 차량의 NVH 성능에 매우 중요한 시스템 이다. 차량의 NVH 성능은 공회전 진동(Idle Vibration), 엔진 쉐이크(Engine Shake) 시동 진동(Key ON/OFF Vibration), 변속 진동(Gear Shift Vibration) 등 다양한 이론이 존재한다. NVH 성능 개선을 위해 이러한 이론들에 대한 실제적 최적화가 필요하며, 특히 최적의 엔진 설치 위치와 강성을 찾아내는 것이 매우 중요하다. 또한 효과적인 NVH 성능 개선을 위하여 차량개발 프로세스 측면에서 제약조건과 한계가 있는 사후 조정보다는 개발 초기에 최적화가 필요하다. 본 논문에서는 엔진 설치 시스템 관련 여러 이론에 대한 최적화 해석과 파워 트레인의 엄격한 모드 분리와 토크롤축(Torque Roll Axis), 탄성롤축(Elastic Roll Axis) 사이의 각도를 최소화 하는 다양한 시뮬레이션 케이스(Simulation Case)와 FE-모드를 개발초기에 수행하여 다중 최적화 분석을 함으로서 최적의 엔진 설치 위치와 강성을 찾아내어 NVH 성능을 개선하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.519-519
• /
• 2023

Estuarine dams are a recent and global phenomenon. While estuarine dams can provide the benefit of improved freshwater resources, they can also alter estuarine processes. Due to the wide range of estuarine types and estuarine dam configurations, the effect of estuarine dams on estuaries is not well understood in general. To develop a systematic understanding of the effect of estuarine dam location and freshwater discharge interval on a range of estuarine types (strongly stratified, partially mixed, periodically stratified, and well-mixed), this study used a coupled hydrodynamic-sediment dynamic numerical model (COAWST) and compared flow, sediment transport, and morphological conditions in the pre- and post-dam estuaries. For each estuarine type, scenarios with dam locations at 20, 55 and 90 km from the mouth and discharge intervals of a discharge every 0.5, 3, and 7 days were investigated. The results were analyzed in terms of change in tide, river discharge, estuarine classification, and sediment flux mechanism. The estuarine dam location primarily affected the tide-dominated estuaries, and the resonance length was an important length scale affecting the tidal currents and Stokes return flow. When the location was less than the resonance length, the tidal currents and Stokes return flow were most reduced due to the loss of tidal prism, the dead-end channel, and the shift from mixed to standing tides. The discharge interval primarily affected the river-dominated estuaries, and the tidal cycle period was an important time scale. When the interval was greater than the tidal cycle period, notable seaward discharge pulses and freshwater fronts occurred. Dams located near the mouth with large discharge interval differed the most from their pre-dam condition based on the estuarine classification. Greater discharge intervals, associated with large discharge magnitudes, resulted in scour and seaward sediment flux in the river-dominated estuaries, and the dam located near the resonance length resulted in the greatest landward tidal pumping sediment flux and deposition in the tide-dominated estuaries.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.173-181
• /
• 1993

자연하천에 대한 합리적인 하천개수계획수립 및 유로의 유지관리면에서 반드시 규명되어야 할 유로만곡부에서의 정량적인 해석은 여러가지 접근방법이 있으며, 사행하천의 유로이동에 대한 예측은 도로, 교량 등의 위치선정과 기존하천구조물의 방재에 필수적이다. 하상계수가 큰 우리나라의 하천에 유로이동 예측모형을 적용할 때 유량은 기간별-지배유량을 고려하는 것이 타당할 것으로 사료되며, 본 연구대상 유역에 대한 침식계수, 유로이동에 대한 평균오차량, 하상세굴계수 등을 비교검토한 결과 유로이동을 지배하는 유량이 존재함을 알 수 있으며, 연구대상유역에서 유로이동에 대한 지배유량은 재현기간 4년에 해당하는 6,000CMS 이상으로 사료된다. 유로이동모형을 실측값이 있는 남한강의 연구대상유로에 적용하여 침식계수를 구하였으며, 계산된 침식계수를 이용하여 그 유로에서의 2000년에 대한 유로이동을 예측하였다.

• Safety and Health at Work
• /
• 제3권2호
• /
• pp.146-153
• /
• 2012

Objectives: The introduction of computerized numeric control (CNC) technology in manufacturing industries has revolutionized the production process, but there are some health and safety problems associated with these machines. The present study aimed to investigate the extent of postural discomfort in CNC machine operators, and the relationship of this discomfort to the display and control panel height, with a view to validate the anthropometric recommendation for the location of the display and control panel in CNC machines. Methods: The postural discomforts associated with CNC machines were studied in 122 male operators using Corlett and Bishop's body part discomfort mapping, subject information, and discomfort level at various time intervals from starting to end of a shift. This information was collected using a questionnaire. Statistical analysis was carried out using ANOVA. Results: Neck discomfort due to the positioning of the machine displays, and shoulder and arm discomfort due to the positioning of controls were identified as common health issues in the operators of these machines. The study revealed that 45.9% of machine operators reported discomfort in the lower back, 41.8% in the neck, 22.1% in the upper-back, 53.3% in the shoulder and arm, and 21.3% of the operators reported discomfort in the leg. Conclusion: Discomfort increased with the progress of the day and was highest at the end of a shift; subject age had no effect on patient tendency to experience discomfort levels.

• International Journal of Computer Science & Network Security
• /
• 제24권2호
• /
• pp.158-168
• /
• 2024

There is hardly any person in modern times who has not taken soft drinks instead of drinking water. The rate of people taking soft drinks being surprisingly high, researchers around the world have cautioned from time to time that these drinks lead to weight gain, raise the risk of non-communicable diseases and so on. Therefore, in this work an image-based tool is developed to monitor the nutritional information of soft drinks by using deep convolutional neural network with transfer learning. At first, visual saliency, mean shift segmentation, thresholding and noise reduction technique, collectively known as 'pre-processing' are adopted to extract the location of drinks region. After removing backgrounds and segment out only the desired area from image, we impose Discrete Wavelength Transform (DWT) based resolution enhancement technique is applied to improve the quality of image. After that, transfer learning model is employed for the classification of drinks. Finally, nutrition value of each drink is estimated using Bag-of-Feature (BoF) based classification and Euclidean distance-based ratio calculation technique. To achieve this, a dataset is built with ten most consumed soft drinks in Bangladesh. These images were collected from imageNet dataset as well as internet and proposed method confirms that it has the ability to detect and recognize different types of drinks with an accuracy of 98.51%.