• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.317-320
• /
• 2005

The LBS (Location-Based Services) are valuable information services combined the location of moving object with various contents such as map, POI (point of Interest), route and so on. The must general service of LBS is route determination service and its applicable parts are FMS (Fleet Management System), travel advisory system and mobile navigation system. The core function of route determination service is determination of optimal route from source to destination in various environments. The MODB (Moving Object Database) system, core part of LBS composition systems, is able to manage current or past location information of moving object and massive trajectory information stored in MODB is value-added data in CRM, ERP and data mining part. Also this past trajectory information can be helpful to determine optimal route. In this paper, we suggest methods to determine optimal route by querying past trajectory information in MODB system and verify the effectiveness of suggested method.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.78-89
• /
• 1992

The most important criteria of quality of meshing and contact of gears are the low level of noise and the sufficient dimensions and location of the contact. A new approach for determination of machine-tool settings for spiral bevel gears is proposed. The proposed settings provide a function of transmission errors, the desired location and orientation of contact. The function is able to absorb piece-wise linear functions of transmission errors that are caused by the gear misalignment and to reduce the gear noise. The determination of pinion machine-tool settings is based on the local synthesis of gears. A computer program for simulation of meshing bearing contact and determination of transmission errors for misaligned has been developed.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.1-8
• /
• 1996

The sound quality of the car audio system is affected by the serveral factors such as the dimensions of the room, the boundary condition of the wall, the location of the speakers, etc. Among these factors, the location of the car speakers has been focused to find the best location of the car speakers assuming that the flat response is better. To verify the suggestion, the subjective test is adopted using 10 people. The developed method is utilizd to evaluate the function of the audio system with fixed speaker position.

• 오토저널
• /
• 제14권3호
• /
• pp.57-70
• /
• 1992

As automobile industry develope, design techniques to satisfy light weight and high efficiency in automobile parts is demanded. In this study modal analysis is performed using transfer matrix method to identify dynamic characteristics of exhaust system. It is estimated the theoretical transfer function by Pestel-Leckey method and the mode shapes in 3-D graphic. the validity of developed program is verified by comparing with the experimental results of exhaust system. Estimated modal parameters(natural frequency, vibrational mode, transfer function) are in accord with the experimental results. From the developed program, we can predict a location of the hanger which is determined by the lowest RMS value point, when displacement is given as an input at the engine side. We can find that attachment of spring modelled hanger at the hanger location bring vibration level down.

• 정보처리학회논문지D
• /
• 제10D권1호
• /
• pp.45-56
• /
• 2003

무선 환경에서 시공간 이동 객체들의 위치 정보를 획득할 수 있는 기술들의 발달로 인해, 차량 추적 시스템, 산불 관리 시스템, 디지털 전장 시스템 등과 같은 다양한 응용 시스템들이 개발되고 있다. 이와 같은 응용에서는 이동 객체의 연속적인 변화 과정을 표현하고, 처리할 수 있는 데이터 모델이 필요하다. 그러나 관계형 모델을 이용하여 이동 객체를 표현할 경우 매 시간 마다 변경된 모든 정보를 저장할 수 없는 문제점이 발생된다. 또한 기존의 이동 객체 데이터 모델에서는 질의 시점을 데이터베이스로 관리되는 과거 시간이나 현재로부터 가까운 미래 시간으로 제한하는 단점이 있다. 따라서 이 논문에서는 모양 변화 처리 기법과 과거와 미래의 위치 추정 함수를 사용함으로써 이동 점 및 이동 영역 객체의 연속적인 움직임을 표현하고 모든 질의 시점에서의 연산을 저리 할 수 있는 이동 객체 데이터 모델을 제안한다 아울러 제안 모델을 산불관리 시스템에 적용 및 구현한 결과를 통해 타당성을 평가한다.

• 한국소음진동공학회논문집
• /
• 제26권7호
• /
• pp.814-819
• /
• 2016

The Stockbridge damper is used to control the aeolian vibration of a overhead transmission line due to the natural wind under a low velocity, between 1 m/s to 7 m/s. The damper model can be simply derived with several design parameters and the location of eigenvalues of design parameters are important to determine the efficiency of energy dissipation by excitation itself with two counterweights. First, the importance of resonance frequencies of Stockbridge damper was reviewed through the analysis of frequency response function of damper system. Then, the best selection of design parameters was investigated with the introduction of objected function that minimize the distance between the calculated eigenvalues and target frequency points. The best choice of design parameters was reviewed using the simulated results from the objective function and the effectiveness of selected design case was discussed at the point view of practical implementation.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.121-126
• /
• 2006

Modern Ocean wave forecasting systems predict the mean sea state, as characterized by the wave spectrum, in a box of size ${\Delta}x{\Delta}y$ surrounding a grid point at location x. It is shown that this approach also allows the determination of deviations from the mean sea state, i.e. the probability distribution function of the surface elevation. Hence, ocean wave forecasting may provide valuable information on extreme sea states.

• 천문학회보
• /
• 제37권2호
• /
• pp.134.1-134.1
• /
• 2012

The radiation belt structure can be approximately reproduced by a form of diffusion equation, which takes into account the radial diffusion process as well as those in pitch angle and energy. The solution of the equation depends on several factors including initial and boundary conditions, diffusion coefficients, and plasmapause location. In this paper, we have attempted to determine a set of approximate functions for the energetic electron fluxes near the outer edge of the outer belt in terms of solar wind variable. We used the electron flux data from SST onboard the THEMIS spacecraft and determined its correlation with solar wind conditions in a systematic way. The functions were determined separately for different energy channels from ~30 keV up to 719 keV. Our determination of these functions allows us to predict the radial boundary condition for the electron flux, which can be implemented in a forecast model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.804-807
• /
• 1996

This paper addresses the small-signal stability and control problems associated with a Static Var Compensator and its power system stabilizer. The major emphasis is on determination of suitable location for SVC arid stabilizer signal tuning through eigenvalues and frequency response techniques. To determinate of suitable location for SVC, this paper used transfer function residues. Adequate oscillation damping is achieved by the use of stabilizing signals, designed through frequency response techniques and added to SVC. The study system is Benchmark System.

• Imaging Science in Dentistry
• /
• 제50권2호
• /
• pp.117-124
• /
• 2020

Purpose: The purpose of this study was to evaluate possible differences in the location of the inferior alveolar canal in male and female Egyptians. Materials and Methods: This cross-sectional retrospective study involved the evaluation of 210 CBCT scans of Egyptian individuals (18-70 years old). The inferior alveolar canal was localized by measuring 8 linear dimensions: 2 for the vertical localization of the mental foramen (superior and inferior to the mental foramen), 4 at the first molar bifurcation for the vertical and horizontal localization of the inferior alveolar canal (superior, inferior, buccal, and lingual to the inferior alveolar canal), and 2 for the horizontal localization of the mandibular foramen (anterior and posterior to the mandibular foramen). The measurements were statistically analyzed via comparative analysis, stepwise logistic regression, and receiver operating characteristic (ROC) curve analysis. Results: Six of the 8 measured distances differed to a statistically significant extent between the sexes. Regression analysis suggested a logistic function with a concordance index of 84%. The diagnostic accuracy capabilities of the linear measurements as sex predictors were calculated using ROC analysis, and the 6 best predictors for sex determination were selected and ranked from highest to lowest predictive power. Moreover, combining these 6 predictors increased the predictive power to 84%. Conclusion: The location of the inferior alveolar canal in the Egyptian population varies significantly by sex; accordingly, this anatomic landmark could be used as a reliable indicator of sexual dimorphism.