• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.63-68
• /
• 2009

The location of mobile terminals in cellular networks is an important problem in the field of information technology with applications in resource allocation, location sensitive browsing, and emergency communications. Finding location estimation techniques that are robust to non-line of light (NLOS) propagation is a key problem in this area. Time of arrival (TOA) and pattern matching (PM) measurements can be made simultaneously by CDMA cellular networks at low cost. The different sources of errors for each measurement type cause TOA and PM measurements to contain independent information about mobile station (MS) locations. This paper combines the information of PM and TOA measurements to calculate a superior location estimate. The proposed location estimator is robust, provides lower error than the estimators based on the individual measurements, and has low implementation costs.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1515-1526
• /
• 2022

Image-based 3D reconstruction is to restore the shape and color of real-world objects, and image sensors mounted on mobile platforms are used for positioning and mapping purposes in indoor and outdoor environments. Due to the increase in accidents in underground space, the location accuracy problem of underground spatial information has been raised. Image-based location estimation studies have been conducted with the advantage of being able to determine the 3D location and simultaneously identify internal damage from image data acquired from the inside of pipeline-type underground facilities. In this study, we studied 3D reconstruction based on the images acquired inside the pipe-type underground facility and reference data. An unmanned mobile system equipped with a stereo camera was used to acquire data and image data within a pipe-type underground facility where reference data were placed at the entrance and exit. Using the acquired image and reference data, the pipe-type underground facility is reconstructed to a geo-referenced 3D shape. The accuracy of the 3D reconstruction result was verified by location and length. It was confirmed that the location was determined with an accuracy of 20 to 60 cm and the length was estimated with an accuracy of about 20 cm. Using the image-based 3D reconstruction method, the position and line-shape of the pipe-type underground facility will be effectively updated.

• Imaging Science in Dentistry
• /
• v.38 no.3
• /
• pp.169-176
• /
• 2008

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-$9000^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by $X^2$-test. Results : 1. There was no statistical significance according to 3 types (type I, type II, type III) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.105-114
• /
• 2008

The purpose of this study is to classify playground types according to the physical characteristics of playgrounds in child care facilities, to analyze the needs of care-givers and to evaluate the adequacy of playgrounds according to playground types. The specific areas discussed in this study were the evaluation of the adequacy in the physical characteristics of playgrounds for children's outdoor play activities by the care-givers, who assist in the outdoor play activities of children and manage safety in the playground, and a report on playground requirements of them. Data was collected from field survey carried out to investigate the physical characteristics of playgrounds of 21 child care facilities. This survey incorporated a structured-questionnaire for the purpose of evaluating the adequacy of the physical characteristics of playgrounds (location and size of the playground, play equipments, the composition of play areas, ground covers, and location of sidewalk in the playground) by the 181 care-givers from the facilities and investigating the needs of them. The major results showed the following. 1) In field survey, it was observed that while the location and the size of the playgrounds varied widely, ground cover, play equipments, and the composition of play area turned out to be identical, regardless of the location and the size of the playgrounds. 2) The playgrounds were classified into five types according to the number of children and the size of the playground. The five types include A-type as a large-scale facility/smallsize playground, B-type as a small-scale facility/large-size playground, C-type as a small-scale facility/small-size playground, D-type as a middle-scale facility/large-size playground, and E-type as a large-scale facility/large-size playground. 3) The adequacy of the physical characteristics of playground in the D-type was evaluated to be higher than that of the other types. The adequacy of the C-type playground was evaluated to be lower than that of the other types in terms of size and the composition of play areas within the playground. 4) The care-givers of the D-type and the E-type playground expressed a desire to install various play equipments, while the care-givers of the C-type playground did not wish to install play equipment. 5) Various outdoor play areas were needed in the D-type playground.

• Journal of Mechanical Science and Technology
• /
• v.19 no.7
• /
• pp.1478-1487
• /
• 2005

A small mixed-type turbine with a diameter of 19.9 mm has been substituted for a rotational part of pencil-type air tool. Usually, a vane-type rotor is applied to the rotational part of the air tool. However, the vane-type rotor has some problems, such as friction, abrasion, and necessity of accurate assembly etc.,. These problems make the life time of the vane-type air tool short, but air tools operated by mixed-type turbines are free of friction and abrasion because the turbine rotor dose not contact with the casing. Moreover, it is assembled easily because of no axis offset. These characteristics are merits for using air tools, but loss of power is inevitable on a non-contacting type rotor due to flow loss, tip clearance loss, and profile loss etc.,. In this study, four different rotors are tested, and their characteristics are investigated by measuring the specific output power. Additionally, optimum nozzle location against the rotor is studied. Output powers are obtained through measured pressure, temperature, torque, rotational speed, and flow rate. The experimental results obtained with four different rotors show that the rotor blade shape greatly influences to the performance, and the optimum nozzle location exists near the mid span of the rotor.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.143-152
• /
• 2009

The numerical analyses for each single simplified shaft with three type openings were carried out by using computational fluid dynamics model for the calculation of the pressure difference and the location of the neutral plane and the visualization of stack effect. As the height of shaft heighten, the pressure difference of stack effect is much deviated against the theoretical value. For the Type A models shorter than 30 m height of shaft and the Type B models longer than 30m, the simulation results for the location of the neutral plane are well agreed to the theoretical values with 5% less deviations just after the beginning of simulation (t = 10s). For the Type B models longer than 30m with multiple openings, therefore, it is possible to calculate the location of the neutral plane by using a CFD model. The phenomenon of the air flow of stack effect can be easily understood with the visualization of stack effect.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.64-71
• /
• 2004

A daily report is one of the critical documents in construction projects, since it helps them keep track of various as-built information. Despite the important role in progress management, the daily reporting process is time-consuming, and the representation of task information on daily reports are not effective enough to accumulate daily as-built information for further use in project management. Task information is composed of a specific work type and a location where the task is performed, which means that the same type of work is repeated over the locations. However, in many cases the task locations are described differently depending on a reporter's preference or experience. Without representing task location information effectively, it is difficult to accumulate and to reuse as-built information. The objective of this research is to build a framework for generating task information which can be efficiently accumulated and reused for progress management. To do so, this research built a task information model with focusing on the representation of task location associated with a work type, and developed an information system that supports automated and interactive generation of task information.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.397-404
• /
• 2021

Product image location in search engine advertising plays an important role in consumer perception when the product is relatively low involved and has functional value. The purpose of this research is to investigate the interaction effects of product image location and product type on advertising effectiveness. Building on the literature of location effects, we show that for products for which heaviness is considered a positive attribute, product image placed on the right are preferred. To test hypotheses, a 2(product image location: left vs. right) × 2(product type: single vs. bundle) experiment is conducted and a total of 144 paricipants took part in the experiment. The results revealed that respondents show higher brand attitude and purchse intention toward a bundle product's advertising with product image place on the right. The results provide implications and suggestions for improving search engine advertising and marketing strategies.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.171-176
• /
• 2013

X-ray cross-sectional image-based inspection technique is one of the most useful methods to inspect the brazing joints of heat exchanger. Through X-ray cross-sectional image acquisition, image processing, and defect inspection, the defects of brazing joints can be detected. This paper presents a method to judge the type of detected defects automatically, and to display them three-dimensionally. The defect type is classified as unconnected defect, void, and so on, based on location, size, and shape information of defect. Three-dimensional display which is realized using OpenGL (Open Graphics Library) will be helpful to understand the overall situation including location, size, shape of the defects in a test object.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.619-628
• /
• 2015

In this paper, we consider a method for estimating a stripe-type defect and the reconstruction of a defect-free L/S type mask used in lithography. Comparing diffraction patterns of defected and defect-free masks, we derive equations for the estimation of the location and size of the defect. We construct an analytical model for this problem and derive closed form equations to determine the location and size using phase retrieval problem solving techniques. Consequently, we develop an algorithm that determines a defect-free mask pattern. An example shows the validity of the equations.