Browse > Article

An Experimental Study of the Performance Characteristics with Four Different Rotor Blade Shapes on a Small Mixed-Type Turbine  

Cho Soo-Yong (Gyeongsang National University, Department of Mechanical and Aerospace Engineering (ReCAPT))
Cho Tae-Hwan (Gyeongsang National University, Department of Mechanical and Aerospace Engineering (ReCAPT))
Choi Sang-Kyu (Department of Advanced Industrial Technology, Korea Institute of Material and Machinery)
Publication Information
Journal of Mechanical Science and Technology / v.19, no.7, 2005 , pp. 1478-1487 More about this Journal
Abstract
A small mixed-type turbine with a diameter of 19.9 mm has been substituted for a rotational part of pencil-type air tool. Usually, a vane-type rotor is applied to the rotational part of the air tool. However, the vane-type rotor has some problems, such as friction, abrasion, and necessity of accurate assembly etc.,. These problems make the life time of the vane-type air tool short, but air tools operated by mixed-type turbines are free of friction and abrasion because the turbine rotor dose not contact with the casing. Moreover, it is assembled easily because of no axis offset. These characteristics are merits for using air tools, but loss of power is inevitable on a non-contacting type rotor due to flow loss, tip clearance loss, and profile loss etc.,. In this study, four different rotors are tested, and their characteristics are investigated by measuring the specific output power. Additionally, optimum nozzle location against the rotor is studied. Output powers are obtained through measured pressure, temperature, torque, rotational speed, and flow rate. The experimental results obtained with four different rotors show that the rotor blade shape greatly influences to the performance, and the optimum nozzle location exists near the mid span of the rotor.
Keywords
Mixed-Type Turbine; Rotor Blade Shape; Micro-Turbine; Air Tool; Turbine Performance;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By Web Of Science : 2  (Related Records In Web of Science)
Times Cited By SCOPUS : 2
연도 인용수 순위
1 He, L., 1997, 'Computation of Unsteady Flow Through. Steam Turbine Blade Row at Partial Admission,' Proc. Instit. Mech. Engrs., Vol. 211 Part A, pp. 197-205   DOI   ScienceOn
2 Lebow, 1998, 'Load Cell and Torque Sensor Handbook No.710B,' Lebow Products, Troy, Michigan, USA
3 Magtrol, 2004, 'Product User's Manuals,' 2000-2004 Magtrol, Inc., 74M124, USA
4 Robert, C. K., Howard, Z. H. and Warren, J. W., 1949, 'Effects of Partial Admission on Performance of a Gas Turbine,' NACA Technical Note No.1807
5 Skopec, J., Vomela, L., Tajc, L. and Polansky, J., 1999, 'Partial Steam Admission in an Axial Turbine Stage,' IMechE Conference Transactions, 1999, Third European Conference on Turbomachinery, Vol. B C557/077/99, pp. 681-691
6 Balje, O. E. and Binsley, R. L., 1968, 'Axial Turbine Performance Evaluation Part A - Loss Geometry Relationships,' J. of Eng. for Power, pp. 341- 348
7 Bohn, D., Drexler, Chr. and Emunds, R., 1993, 'Experimental and Theoretical Investigations into the Non-uniform Flow of a Partial Admission Turbine with a Multistage Blading,' VGB Kraftwerkstechnik 73, No. 8, pp. 610-608
8 Cho, S. Y. and Kim, E. S., 2003, 'Study on Measuring the Performance of an Air Tool Operating at 100,000RPM Class,' J. of Fluid Machinery, Vol. 6, No. 3, pp. 44-50   DOI
9 Bohn, D., Gier, J. and Ziemann, M., 1998, 'Influence of the Cross-Over Channel Geometry on the Flow Equalization in Partial-Admission Turbines,' VGB Power Tech 2, pp. 49-54
10 Boulbin, F., Hetet, J. F. and Chesse, P., 1994, 'Non-steady Flow in the Partial Admission,' VDI Berichte NR, 1109, pp. 395-401
11 Cho, S. Y., Yoon, E. S. and Choi, B. S., 2002, 'A Study on an Axial-Type 2-D Turbine Blade Shape for Reducing the Blade Profile Loss,' KSME into J., Vol. 16, No. 8, pp. 1154- 1164. (in Korea)   과학기술학회마을