• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.676-678
• /
• 2003

Recently, in according as rapid improvement of telecommunication markets and wireless internet technology, Location- Based Services (LBS) have been discussed as new 'Killer' application. The purpose of LBS is to determine location of user through mobile handset and to offer location information service to end-user. This paper has suggested an efficient transmission scheme of maps data as one of the important content services relating to data transmission of LBS in mobile environment. The basic system consists of three parts : (1) GIS (Geographic Information System) Server for storing, processing and handling map data, (2) Middleware Server for transmitting of map data by request of client, and (3) Client for requesting map data to Server and displaying them on handset. Also, in order to transmit map data, we are to expand WKB (Well Known Binary) in conformance to Simple Feature Specification of OGC (Open GIS Consortium), and increase efficiency of data transmission by developing trans mission data format to be able to transmit lightweight data and considering data compression technology.

• Journal of Multimedia Information System
• /
• 제3권4호
• /
• pp.129-134
• /
• 2016

A routing protocol in mobile ad hoc networks is important, and a location based routing has attracted attention. We have proposed a method, in which plural mobile agents (MA) manage location information and construct a route and the number of MA dynamically changes depending on the network situation. However, the area where each MA manages is not always appropriate. This would increase the network load due to unnecessary split and mergence of MAs. To solve this problem, in this paper, we propose an enhanced method. In this method, the MA management area is properly determined based on distribution of nodes. From the performance evaluation, we show that the proposed method outperforms conventional methods in terms of packet delivery rate when network load is high.

• 반도체디스플레이기술학회지
• /
• 제7권3호
• /
• pp.59-63
• /
• 2008

Geo-coding refers to the process of associating data with location information, and the system deals with geographic identifiers expressed as latitude and longitude or street addresses. Although many services have been launched, there still remains a problem for users to create geo-coded photo with manually labeling GPS(Global Positioning System) coordinate or synchronizing with separate devices. In this paper, we design and implement a geo-coding system which utilizes the time and location information embedded in digital photographs in order to automatically categorize a personal photo collection. An included GPS receiver labels a photograph with its corresponding GPS coordinates, and the position of the camera is automatically recorded into the photo image header at the moment of capture. The place and time where the photo was taken allows us to provide context metadata on the management and retrieval of information.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.191-197
• /
• 2010

In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.

• 한국환경복원기술학회지
• /
• 제12권4호
• /
• pp.34-46
• /
• 2009

and to provide (case example-focused) guidelines for environment-friendly oriented plans. Key findings of this study are as follows : first, a total of 2,465 development projects covering $173km^2$ were undertaken in Gyeonggi province in last three years. Second, based on the analysis of 16 development projects in four types, about 20 alternative environment-friendly location were suggested. Thirdly, 56 environment-friendly criteria were suggested for the environmental assessment items by setting at least three alternatives. Going forward, if discussion case examples by project type, environment-friendly location criteria by project type, and environment friendly review criteria by assessment item suggested in this study are fully utilized when initiating or approving various development projects in the future, environment-friendliness will be enhanced in development projects.

• Journal of electromagnetic engineering and science
• /
• 제11권1호
• /
• pp.51-55
• /
• 2011

Electromagnetic fields, radiated from an intestine-ingested source and propagated through an inhomogeneous human body model, are computed with the finite-difference time-domain (FDTD) method. The calculated results obtained at some receiving points vertically placed according to the abdomen of the human body model show unusual dip patterns in the frequency domain. The frequency of this unusual dip varies according to the location of the receiving points. Thus, the relationship between the frequency of the unusual dip and the incident angle of the line-of-sight is analyzed. The effect of the location of an ingested source on the above relationship is also investigated. The slope of the approximately linear relationship is affected by the location of the ingested source.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.36-41
• /
• 2014

Most faults that occur on transmission lines are caused by extreme weather with lightning storms in the distance. These are not only prolongs the time of removing and recovering, but also increases economical damages. If faults can be precisely located, maintenance crews can reach them quickly, and remove the faults in time. So, the precise locating of the faulted point on a transmission line is very important to improve the system reliability, and decreases economic damages as an inherent consequence of long term outages. Also, fault location methods are becoming of much importance for utilities and research. In this paper, two single-terminal impedance-based fault location techniques will be investigated to show the reliability and evaluated the performance of reactance and Takagi method by using MATHCAD program simulations.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.302-306
• /
• 2021

Indoor localization is one of the basic elements of Location-Based Service, such as indoor navigation, location-based precision marketing, spatial recognition of robotics, augmented reality, and mixed reality. We propose a Voxel Labeling-based visual positioning system using object simultaneous localization and mapping (SLAM). Our method is a method of determining a location through single image 3D cuboid object detection and object SLAM for indoor navigation, then mapping to create an indoor map, addressing it with voxels, and matching with a defined space. First, high-quality cuboids are created from sampling 2D bounding boxes and vanishing points for single image object detection. And after jointly optimizing the poses of cameras, objects, and points, it is a Visual Positioning System (VPS) through matching with the pose information of the object in the voxel database. Our method provided the spatial information needed to the user with improved location accuracy and direction estimation.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1150-1156
• /
• 2009

The spread of wireless Internet technology development and applications with location information in the form of location-based services are more varied. In particular, where you recognize the location of objects such as people and things, and to provide valuable services based on ubiquitous, location-based services (Ubiquitous Location Based Services: u-LBS) is emerging as an important service. In this paper precise location data to the car crash through the location and offers related service system. In this paper the precise location tracking proposed by the concept of the Rail, road, to extract the location Data Matching Data and the current location is obtained. System used in GPS Packet and information about the location of the vehicle collision and the collision time, the vehicle consists of NodeID is about. Using these data, a packet is to be created when the conflict between vehicles in the vehicle will be sent to Gateway. Gateway to the packets that were sent from the Server to determine whether the conflict is that in an emergency situation, Emergency Center for location information and let me know whether or not the conflict will be measured. Also, for those on the outside of an emergency such as a family related to the wireless terminal wireless (PDA, cell phone) is to let me know. Server get into the conflict that was configured to store information on the Database. Additionally, the proposed u-LBS system to verify the validity of the experiment was performed.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.155-162
• /
• 2019

To reduce the secondary damage caused by leakage accidents in plant piping systems, a constant surveillance system is necessary. To ensure leaks are promptly addressed, the surveillance system should be able to detect not only the leak itself, but also the location of the leak. Recently, research to develop new methods has been conducted using cameras to detect leakage and to estimate the location of leakage. However, existing methods solely estimate whether a leak exists or not, or only provide two-dimensional coordinates of the leakage location. In this paper, a method using multiple cameras to detect leakage and estimate the three-dimensional coordinates of the leakage location is presented. Leakage is detected by each camera using MADI(Moving Average Differential Image) and histogram analysis. The two-dimensional leakage location is estimated using the detected leakage area. The three-dimensional leakage location is subsequently estimated based on the two-dimensional leakage location. To achieve this, the coordinates (x, z) for the leakage are calculated for a horizontal section (XZ plane) in the monitoring area. Then, the y-coordinate of leakage is calculated using a vertical section from each camera. The method proposed in this paper could accurately estimate the three-dimensional location of a leak using multiple cameras.