• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.76-84
• /
• 1997

Loose parts monitoring system(LPMS), which is used to detect metallic loose parts in the nuclear power plant, plays an important role in safe and reliable operation of the plant. To prevent from the damage due to the loose parts, most domestic nuclear power plants are using, or planning to use LPMS. However, these LPMS's, which are all invented from overseas and thereby depend on the oversea technologies, are very expensive, and are known to be inefficient to diagnose loose parts due to the lack of fundamental know-how of LPMS. Therefore, the main purpose of this paper is to propose and to realize a new loose parts localization algorithm which is simple and efficient enough even for the inexperienced operators to diagnose loose parts accurately and promptly. Considering practical nuclear power plant circumstances, some simulations for estimating the loose parts location have been done. The results show that the proposed method, called a modified circle intersection method, performs high resolved loose parts localization with 3.4% of error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.131-136
• /
• 2016

In this paper, we propose an Raspberry Pi2-based smart home security monitoring system. Proposed home security monitoring system was configured using a relatively tractable main processor raspberry pi2, ultrasonic sensors, and PIR sensors. In addition, The picamera is compatible with raspberry pi2 was connected to the servo motor. And by driving the attacker's location the video was recording. The Web server stores data of the recorded image and the sensor, and provides a web page to enable the monitoring at all remote locations. When examining efficiency of proposed home security monitoring system it was found that proposed system is easier to be made than existing home security system and is able to minimize the blind spot of the camera by using servo motor and is efficient and convenient and stable as it enables a user to handle an error in person and it uses reliable data.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.67-73
• /
• 2010

In this paper, a new face detection method that is more accurate than the conventional methods is proposed. This method utilizes a hybrid of Hausdorff distance based on the geometric similarity between the two sets of points and the LBP distance based on the distribution of local micro texture of an image. The parameters for normalization and the optimal blending factor of the two different metrics were calculated from training sample images. Popularly used face database was used to show that the proposed method is more effective and robust to the variation of the pose, illumination, and back ground than the methods based on the Hausdorff distance or LBP distance. In the particular case, the average error distance between the detected and the true face location was reduced to 47.9% of the result of LBP method, and 22.8% of the result of Hausdorff method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.56-63
• /
• 2016

We consider a satellite mission scheduling problem, which is a promising problem in recent satellite industry. This problem has various considerations such as customer importance, due date, limited capacity of energy and memory, distance of the location of each mission, etc. Also we consider the objective of each satellite such as general purpose satellite, strategic mission and commercial satellite. And this problem can be modelled as a general knapsack problem, which is famous NP-hard problem, if the objective is defined as to maximize the total mission score performed. To solve this kind of problem, heuristic algorithm such as taboo and genetic algorithm are applied and their performance are acceptable in some extent. To propose more efficient algorithm than previous research, we applied a particle swarm optimization algorithm, which is the most promising method in optimization problem recently in this research. Owing to limitation of current study in obtaining real information and several assumptions, we generated 200 satellite missions with required information for each mission. Based on generated information, we compared the results by our approach algorithm with those of CPLEX. This comparison shows that our proposed approach give us almost accurate results as just less than 3% error rate, and computation time is just a little to be applied to real problem. Also this algorithm has enough scalability by innate characteristic of PSO. We also applied it to mission scheduling problem of various class of satellite. The results are quite reasonable enough to conclude that our proposed algorithm may work in satellite mission scheduling problem.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.5
• /
• pp.461-470
• /
• 2018

In this study, the leak signal was measured by using an accelerometer to analyze the basic data and methodology for the development of the leak point estimation method in the water supply pipe. The measured results were analyzed by frequency analysis and cross-correlation analysis for leakage signals, and the error range was compared and analyzed with the actual leak point distance. As a result, it was confirmed that the vibration intensity due to leakage from the water leakage point was attenuated according to the distance. In the case of the ductile iron casting used in the experiment, the intensity of the signal at the 945 Hz, 1,500 Hz, 2,300 Hz band was increased with the change of the pressure in the pipe at 4mm of leakage hole. Also, it was confirmed that as the water pressure increases, the intensity of the leak signal increases but the similarity of the signal decreases. The results of this study confirm that the accelerometer sensor can be used efficiently for leak detection and it can be used as a basic data for the analysis for the development of leak point estimation method in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.41-48
• /
• 1986

Ifis recommended that the injection rate should be accurate and reliable in the input data of the performance simulation in diesel engine. Matsuoka Sin improved W. Bosch's injection ratio measurement system. Matsuoka Sin reduced length of the test pipe and set the orifice. However, it was not measured accurately to measure the injection ratio due to reflection wave. In the present thesis, the improved measurement system with combination of the conventional W. Bosch type injection ratio measurement system and Matsuoka Sin type corrected W. Bosch type was practically made. The location of orifice and throttle valve was modified and set one more back pressure valve in order to reduce the effect of reflection wave. The results according to injection condition of multi-hole nozzle are following: 1. Measurement error of injection ratio measurement system in this thesis was $\pm$ 1 %, therefore, its reliability was good. 2. The form of injetion ratio is changed from trapezoidal shape to triangle shape with increase of revolution per minute when injection amount is constant. 3. In the case of constant rpm, the initial injection ratio is almost constant regardless of the amount, meanwhile the injection period becomes longer with increase of the amount. 4. The injection pressure of nozzle isn't largely influenced with injection ratio in the case of constant injection amount and rpm, otherwise the initial injection amount is increased by 3-4% when the injection pressure is low. 5. The injection ratio isn't nearly influenced with back pressure.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.86-94
• /
• 2010

In this paper, we propose spatially adaptive color demosaicing of noisy Bayer data. When sensor noises are not considered in demosaicing, they may degrade result image. In order to obtain high resolution image, sensor noises are considered in the color demosaicing step. We identify flat, edge and pattern regions at each pixel location to improve the performance of the algorithm and to reduce complexity. Based on the pre-classified regions, the demosaicing of the G channel is performed using the local statistics to reduce the interpolation error. The sensor noise is simultaneously removed by a modified version of non-local mean filter in the green and in the color difference domain. The R and B channels are interpolated easily using fully interpolated and denoised G and color difference values. Experimental results show that the proposed method achieves a significant improvement in terms of visual and numerical criteria, when compared to conventional methods.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.52-61
• /
• 2013

In wireless sensor networks, the geographical positioning scheme is one of core technologies for sensor applications such as disaster monitoring and environment monitoring. For this reason, studies on range-free positioning schemes have been actively progressing. The density probability scheme based on central limit theorem and normal distribution was proposed to improve the location accuracy in non-uniform sensor network environments. The density probability scheme measures the final positions of unknown nodes by estimating distance through the sensor node communication. However, it has a problem that all of the neighboring nodes have the same 1-hop distance. In this paper, we propose an efficient sensor positioning scheme that overcomes this problem. The proposed scheme performs the second positioning step through the sensing range control after estimating the 1-hop distance of each node in order to minimize the estimation error. Our experimental results show that our proposed scheme improves the accuracy of sensor positioning by about 9% over the density probability scheme and by about 48% over the DV-HOP scheme.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.160-171
• /
• 2006

In this paper, we propose a face detection method using region segmentation to deal with complex images that have various environmental changes such as mixed background and light changes. To reduce the detection error rate due to background elements of the images, we segment the images with the JSEG method. We choose candidate regions of face based on the ratio of skin pixels from the segmented regions. From the candidate regions we detect face regions by using location and color information of eyes and eyebrows. In the experiment, the proposed method works well with the images that have several faces and different face size as well as mixed background and light changes.