• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.871-878
• /
• 2018

The government of Gyeongbuk in Korea increased the financial input in the agricultural sector by 43% from 2008 through 2012. However, the productivity of the agricultural sector in Gyeongbuk rose only about 3.6% during the same period. This study evaluated the agricultural competitiveness of each city or county in Gyeongbuk using six evaluation indices (scale, productivity, finance input, location quotient, technical education, and total) and investigated the relationship between the indices and total values of agricultural productions. The results show that Sangju, Gyeongju, Andong, Uiseong, and Seongju have high competitiveness for the scale index. For the productivity index, Gimcheon, Mungyeong, Ulleung, Yeongju, and Seongju were highly evaluated. For the location quotient index, Yeongcheon, Uiseong, Cheongdo, Seongju, and Sangju have high competitiveness. Uiseong, Yeongdeok, Cheongsong, Gunwi, and Yeongyang were highly evaluated for the agricultural finance input index. For the agricultural technical education index, Chilgok, Sangju, Mungyeong, Uiseong, and Gyeongju have high competitiveness. Finally, Sangju, Euiseong, Yeongcheon, Gyeongju, and Andong were highly evaluated for the total competitive index, while Yeongdeok, Yeongyang, Goryeong, Uljin, and Cheongsong have a low competitiveness for the total competitive index. This study also found that out of five indices, scale, location quotient, and technical education indices have a positive and statistically significant effect on the total values of agricultural production. However, we did not find any statistically significant effect of the productivity and finance input indices on the total values of agricultural production. Hence, we can conclude that the government should focus their agricultural policy on scale, location quotient and education to improve total agricultural production.

• Journal of Hydrogen and New Energy
• /
• v.35 no.4
• /
• pp.415-427
• /
• 2024

Explosion experiments were conducted using a rectangular concrete structure filled with hydrogen-air mixture (29.0%). In addition, the effect of ignition location on explosion was investigated. The impact on overpressure and flame was increased with the increasing distance of the ignition source from the vent. Importantly, depending on the ignition location the incident pressure was up to 24.4 times higher, while the reflected pressure was 8.7 times higher. Additionally, a maximum external overpressure of 30.01 kPa was measured at a distance of 2.4 m from the vent, predicting damage to humans at the injury level (1% fatality probability). Whereas, no significant damage would occur at a distance of 7.4 m or more from the vent.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.375-389
• /
• 1993

The delivery of optimal orthodontic treatment is greatly influenced by a clinician's ability to predict and control tooth movement achieved by applying known force systems to the dentition. It is important to determine the location of the center of resistance of a tooth or group of teeth to better understand the nature of their displacement characteristics under the various force levels. The purpose of this study was to define the location of the centers of resistance of various units of the upper anterior segment for lingually directed 100gm and 200gm force in a dry human skull. The units investigated were composed of four incisors and six anterior teeth. In addition, the effect of change in force magnitude on the location of the center of resistance of these units was investigated. The laser reflection technique was used to measure the initial displacements of the consolidated teeth under loading. The results were as follows: 1. The instantaneous center of resistance for the four anterior teeth was located vertically between level 4 and level 5-that is, at $37.4\%$ apical to the cementoenamel junction level. 2. The instantaneous center of resistance for the six anterior teeth was located vertically just beneath level 5-that is, at $50.3\%$ apical to the cementoenamel junction level. 3. Increasing force levels had little effect on the location of the center of resistance of a given unit. 4. The location of the instantaneous center of resistance shifted apically as the number of dental units consolidated increased.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.627-643
• /
• 2015

Negative stiffness, previously emulated by active or semi-active control for cable vibration mitigation, is realized passively using a self-contained highly compressed spring, the negative stiffness device (NSD).The NSD installed in parallel with a viscous damper (VD) in the vicinity of cable anchorage, enables increment of damper deformation during cable vibrations and hence increases the attainable cable damping. Considering the small cable displacement at the damper location, even with the weakening device, the force provided by the NSD-VD assembly is approximately linear. Complex frequency analysis has thus been conducted to evaluate the damping effect of the assembly on the cable; the displacement-dependent negative stiffness is further accounted by numerical analysis, validating the accuracy of the linear approximation for practical ranges of cable and NSD configurations. The NSD is confirmed to be a practical and cost-effective solution to improve the modal damping of a cable provided by an external damper, especially for super-long cables where the damper location is particularly limited. Moreover, mathematically, a linear negative stiffness and viscous damping assembly has proven capability to represent active or semi-active control for simplified cable vibration analysis as reported in the literature, while in these studies only the assembly located near cable anchorage has been addressed. It is of considerable interest to understand the general characteristics of a cable with the assembly relieving the location restriction, since it is quite practical to have an active controller installed at arbitrary location along the cable span such as by hanging an active tuned mass damper. In this paper the cable frequency variations and damping evolutions with respect to the arbitrary assembly location are then evaluated and compared to those of a taut cable with a viscous damper at arbitrary location, and novel frequency shifts are observed. The characterized complex frequencies presented in this paper can be used for preliminary damping effect evaluation of an adaptive passive or semi-active or active device for cable vibration control.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1155-1158
• /
• 2006

This paper presents a study on the construction condition and environmental effect of deep soil mixing. Construction condition means the difference in unconfined compressive strength with respect to the depth and location of samples. Environmental effect means alkalinity diffused from soil stabilizer. The experimental results indicate that the unconfined compressive strength vary with respect to the depth, and doesn't show consistency pattern. So, in field application we must decide a mixing ratio enough to satisfy the least unconfined compressive strength. The difference in unconfined compressive strength with respect to the location of samples is negligible. The generation of alkalinity from soil stabilizer is reduced by permeating in non-improved soil and it is expected that the diffusion of alkalinity has no environmental effect on soil and ground water.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2245-2252
• /
• 2005

Thermal stratification in the branch piping of power plants can be generated by turbulent penetration or by valve leakage. In this study, a numerical analysis was performed to estimate the thermal stratification phenomenon by in-leakage in the SIS branch piping of nuclear power plant. Leakage rate, leakage area and leakage location were selected as evaluation factors to investigate the thermal stratification effect. As a result of the thermal stratification effect according to leakage rate, the maximum temperature difference between top and bottom of the horizontal piping was evaluated to be about 185K when the valve leakage rate was about 10 times as much as the allowed leakage rate. For leakage rate more than 10 times the allowed leakage rate, the temperature difference was rapidly decreased due to the increased mixing effect. In the result according to leakage area, the magnitude of temperature difference was shown in order of $3\%,\;1\%\;and\;5\%$ leakage area of the total disk area. In the thermal stratification effect, according to the leakage location, temperature difference when leakage occurred in the lower disk was considerably higher than that of when leakage occurred in the upper disk.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.145-150
• /
• 2009

Because it is difficult to install new large hydraulic structure, washland is considered as alternatives of hydraulic facility. As flood reduction effect of washland is dependent on flood, hydrograph, capacity of washland and spillway height, applying adequate spillway height is very important to maximize flood reduction effect of washland. In this study, effect of variation of spillway height on flood reduction effect of washlands is analyzed. The existing model developed to make decision for optimal location of washland using flood reduction effect as evaluation function and location of washland as decision variable was revised for this purpose. The spillway height of washland is added as decision variable and revised model finally give optimal location and spillway height of washland as result. The developed model has been applied to the Ansung River basin and application result was compared with that of existing model. The application result shows that developed model can give more efficient result than existing model.

• Composites Research
• /
• v.28 no.3
• /
• pp.136-141
• /
• 2015

The stitching process has been widely utilized for the improvement of through-thickness property of the conventional laminated composites. This paper reports the effects of stitching on the flexural and interlaminar shear properties of multi-axial warp knitted (MWK) composites in order to identify the mechanical property improvements. In order to minimize the geometric uncertainties associated with the stacking pattern of fabrics, the regular lay-up was considered in the examination of the stitching effect. The key parameters are as follows: the stitch spacings, the stitching types, the stitching location, and the location of compression fixture nose. These parameters have little effect on the flexural and interlaminar shear properties, except for the case of stitching location. However, the geometry variations caused by the stitching resulted in minor changes to the mechanical properties consistently. Stitching on the $0^{\circ}$ fibers showed the lowest flexural strength and modulus (12% reduction for both properties). The stitch spacing of 5 mm resulted in 8% reduction for the case of interlaminar strength compared with that of 10 mm spacing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.248-254
• /
• 2013

In location finding system using spaced multi-sensor, there is the phenomenon that the position estimation accuracy is degraded by the location of signal sources and the sensors. This phenomenon is called GDOP(Geometric Dilution Of Precision) effect. and to minimize these effects, research is needed on how. In this paper, I will describe how to minimize GDOP effect, estimating possibility of GDOP using AOA(angle of arrival) information of spaced multi sensors, and removing sensor error factor in position estimation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.84-92
• /
• 2020

In order to analyze the organizational performance of government-funded research institutes, four independent variables (organization size, organization age, evaluation system, organization location) and goal ambiguity were empirically analyzed. Although there are existing studies on institutional evaluation, which is the organizational performance of government-funded research institutes, there are differences in research in that it is an empirical analysis analyzed from the perspective of goal ambiguity and that the evaluation system, which is the specificity of institutional evaluation, is included in the analysis. As a result of the analysis, organizational location was the only independent variable that had a direct significant effect on organizational performance, and goal ambiguity showed a significant mediating effect for all independent variables. This indicates that goal ambiguity plays an important role in the organizational performance of government-funded research institutes, and to reduce this, increase the size of the organization, pay attention to establishment of the organization for organizational age, and that it is desirable to have an independent research group in the government department for the organization location. In addition, it was supported that the improvement effect of the evaluation system is proceeding in a desirable direction in terms of goal ambiguity.