• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.226-227
• /
• 2006

Wind power is one of the fastest growing distributed generation types. As part of a worldwide trend, the concerns of large wind generation have been risen rather than small wind generation since it influences the whole power system Including the transient stability. The objective of this paper is to understand the effect of a large-scale wind generation on power system transient stability and to develop a systematic procedure to assess the effect according to the location and capacity of a wind farm. In the proposed procedure, an index is presented to evaluate the appropriateness of the location and capacity of a wind farm for transient stability contingencies.

• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.657-663
• /
• 2010

본 연구는 부동산중개업을 하는데 필요한 중요 구성요소를 도출하여 서비스 가치, 고객의 재이용의도, 구전효과와의 관계를 검증하여 고객들이 원하는 구성요소가 무엇인지를 분석하였다. 그 결과 중개업자의 능력과 중개업자의 신뢰성, 중개업소의 위치가 중요한 구성요소임을 검증한 반면 중개업소의 환경은 그다지 중요하지 않는 것으로 검증되었다. 따라서 고객들이 생각하는 가장 중요한 요소는 중개업자의 능력이므로 이에 대한 대비책 강구가 필요하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1885-1890
• /
• 2005

The contour method relies on deformations that occur when a residually stressed component is cut along a plane. The method is based on the elastic superposition principle. When plasticity is involved in the relaxation process, stress error in the resulting measurement of residual stress would be caused. During the cutting the specimen is constrained at a location along the cut so that deformations are restrained as much as possible during cutting. With proper selection of the constraining location the plasticity effect can also be minimized. Typical patterns of longitudinal welding residual stress state were taken to assess the plasticity effect along with constraining locations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1234-1237
• /
• 2002

When measuring sound transmission loss (STL) in a laboratory, the specimen location in test aperture affects considerably the measuring accuracy through the influence of so-called “tunneling effect” In this paper, for a single panel and a double panel with air cavity, experimental STL evaluations on various specimen locations on test aperture were carried out to explain the phenomenon. It is shown that the difference of STL is more than 2dB especially at the low frequency region and the case of the center-located panel yielded the lower STL than that of flushing with the end of tunnel, which confirms that the tunneling effect plays an important role in STL measurement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.96-103
• /
• 2010

This paper presents of effect of tunneling on pile group of being operated bridge using Three-dimensional numerical modeling to study the effect of coordination of tunneling location under discontinuous group pile. In order to find idealistic tunneling location that causes settlement, change of stress on the piles and movement of soil at a minimum, a fully coupled 3D finite element model is adopted. The study contains pile settlement, axial force on each piles in the group, axial displacement of piles and soil behaviour caused by tunneling. Based on the result some insights into the pile behavior due to tunneling obtained from numerical analysis were mentioned and discussed.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4522-4533
• /
• 2022

For severe accident assessment of reactor pressure vessel (RPV), it is important to develop an accurate model that can predict transient thermo-mechanical behavior of the RPV lower head under the given condition. The present study revisits the lower head failure with two- and three-dimensional finite element models. In particular, we aim to give clear insight regarding the effect of the three-dimensionality present in the distribution of the thickness and thermal load of the lower head. For a rigorous validation of the result, both the OLHF-1 and the OLHF-2 tests are considered in this study. The result suggests that the three-dimensional effect is not negligible as far as the failure location is concerned. The non-uniformity of the thickness distribution is found to affect the failure location and time. The thermal load, which may not be axisymmetric in general, has the most significant effect on the failure assessment. We also observe that the creep property can affect the global deformation of the lower head, depending on the applied mechanical load.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.235-236
• /
• 2022

In the present study, the effect of horizontal vent position on fire phenomena in the enclosure with vertical and horizontal vents was examined using numerical simulation. Case 1 indicates the condition that the horizontal vent is in the center of the ceiling. Case 3 indicates the condition that the horizontal vent is far away from the vertical vent. Case 2 indicates the condition that the horizontal vent is installed between Case 1 and Case 3. The temperature distribution, smoke layer temperature, velocity distribution, and mass flow rate of horizontal vent flow were analyzed. In Case 2, the temperatures were lowest and the mass flow rate through the horizontal vent was largest. This is because the flame is inclined by the inflow through the vertical vent. Hence, to determine the proper horizontal vent location for the high smoke ventilation performance, the inflow through the vertical vent and its effect on flame behavior should be considered.

• 한국항해항만학회지
• /
• 제43권2호
• /
• pp.122-133
• /
• 2019

The maritime industry has emerged as a new growth engine. The municipalities that own the port are trying to add value through the maritime industry. Overseas port cities are also creating maritime industrial clusters to generate profits and strengthen competitiveness. Therefore, it is very important to understand the comparative status of the domestic maritime industry by region. Based on this analysis, it is possible to establish maritime industrial clusters and strategies for integration. This study analyzed the structure of the maritime industry located in Jeollanamdo province, the southwestern part of Korea. Through the analysis of existing literature, the maritime industry was reclassified into 5 major categories, 21 subcategories, and 84 subcategories. Based on the reclassified maritime industry, the analysis of the Jeollanamdo province maritime industry was based on applying the location quotient and the shift-share analysis. As a result of analyzing the geographical location of Jeollanamdo province, other industries showed the highest value of 2.790, followed by fisheries (2.227), shipbuilding industry (1.164) and marine tourism industry (0.554). The growth effect of the maritime industry in Jeollanamdo province was 35,323 people, and net growth effect excluding national growth effect was 11,945 people. In particular, the net growth effect of the shipbuilding industry was the highest at 11,320, followed by shipping logistics (6,371) and marine tourism (1,529). On the other hand, there was no net growth effect in fisheries. The results of this study can be used as basic data for the construction of the maritime industrial cluster for Jellanamdo province in the future.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.15-27
• /
• 2006

The purpose of this study is to evaluate the differences of visual image by variations in the location of the waistline and the width of the round belt of the basic pants. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 35 fashion design majors. The data has analyzed by frequency, factor analysis, anova, scheffe's test and the MCA method. The visual image by the location of waistline and the width of belt are composed of 3 factors : modernity, comfort and attraction factor. In these factors, modernity factor is estimated as the most important factor. The visual image is modern and attractive as the location of waist line goes down. And when the location of waist line is in the position of natural waist belt, belt of 3.2cm width is visually effective. Belt of 4.2cm width is effective except the position of natural waist belt. The interaction effects between the location of the waistline and the width of the belt have significant differences in comfort and attraction factors. As the main effect, significant differences were observed in all of the three factors according to the location of waistline and the width of belt.

• 한국콘텐츠학회논문지
• /
• 제18권11호
• /
• pp.75-86
• /
• 2018

본 연구는 요양병원 입지전략과 내부역량의 복합적인 상호작용을 전제로 하여 재이용의도와의 관련성을 동시추정방식으로 분석하였다. 연구결과는 다음과 같다. 첫째, 재이용의도에 대한 상대적 영향력은 병원입지전략(${\beta}=0.313$) 보다 병원내부역량(${\beta}=0.490$)이 크지만 두 요인 모두 재이용의도에 통계적으로 유의미한 영향을 미친다는 점에서 선행연구 결과를 확인해 주고 있다. 둘째, 재활기능강화형 요양병원의 경우 입지전략의 중요성이 일반요양형 병원에 비해 더 중요하다는 점이 확인되었다(${\beta}=0.443$). 재활기능강화형 요양병원 개원시 특히 입지시장성, 교통인프라, 건물매력도, 의료집적성 등 입지요인에 근거하여 면밀한 준비가 선행되어야 한다는 점이 제시되고 있다. 셋째, 병원내부역량은 병원유형에 따른 조절효과는 나타나지 않았으며, 일반요양형 병원과 재활기능강화형 병원에 있어 모두 중요한 요인임이 확인되었다.